Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF AUGUST 16, 2015 FBO #5014
SOLICITATION NOTICE

32 -- FCI FAIRTON CARPETER MACHINES

Notice Date

8/14/2015
 

Notice Type

Combined Synopsis/Solicitation
 

Contracting Office

655 Fairton-Millville Road, Fairton, NJ 08320
 

ZIP Code

08320
 

Solicitation Number

FAIPG310010
 

Response Due

8/24/2015
 

Archive Date

2/20/2016
 

Point of Contact

Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
 

E-Mail Address

Clientservices@fedbid.com;
 

Small Business Set-Aside

Total Small Business
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is FAIPG310010 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83-2. The associated North American Industrial Classification System (NAICS) code for this procurement is 333515 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-08-24 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fairton, NJ 08320 The DOJ BOP Field Offices -FCI FAIRTON requires the following items, Brand Name or Equal, to the following: LI 001: GRIZZLY MODEL G0756- HEAVY DUTY-DRILLING MACHINE STANDING 89-1/2" TALL SEPECIFICATGIONS- MAIN MOTOR: 2 HP, 220V, 3 PHASE, 6.4A, COOLANT PUMP-60W, MAX SPINDLE TO TABLE DISTANCE 30-3/4", SPINDALE TRAVEL 7", SPINDLE SIZE: MT #4, SPINDLE SPEEDS(18 TOTAL) 60-1740 RPM, DOWNFEED SPEEDS: 0.004"/REV, 0.008"/REV, TABLE SIZE 22"L X 22"W X 1-7/8" H, T-SLOT SIZE: 9/16", VERTICAL TABLE TRAVEL: 20", TABLE SWIVEL 360 DEGREES, MAX DRILLING CAPACITY IN CAST IRON:1-1/2", MAX DRILLING CAPACTIY IN STEEL: 1-3/16", QUI;; DIAMETER: 3", COLUMN DIAMETER. 6', FOOTPRINT: 20" W X 29" D, OVERALL SIZE 22" W X 89-1/2" H X 37" D FEATURES FRONT-MOUNTED EMERGENCY STOP BUTTON SEE-THROUGH CHIP GUARD PUMP-DRIVEN COLLANT SYSTEM STANDARD AND METRIC GUIDE RULERS SOLID CAST IRON CONSTRUCTION 360 DEGREES TABLE POSITIONING AROUND COLUMN BUILT-IN HALOGEN WORK LIGHT DEPTH STOP WITH AUTO SHUT OFF SWITCH SPINDLE SPEEDS CHANGE WITH CONVENIENT GEARHEAD LEVERS BASE HAS PRECISION-GROUND WORK SURFACE WITH TWO 9/16" T-SLOTS SPINDLE ADAPTER SLEEVES INCLUDED FOR MT #3 AND MT #2 TOOLING 1/8"-5/8" DRILL CHUCK WITH ARBOR INCLUDE SHIPPING IN PRICE, 1, EA; LI 002: GRIZZLY G0701 - 19" ULTIMATE BANDSAW SPECIFICATION MOTOR, 5 HP, 230V, SINGLE PHASE, TEFC, 60 HZ, 22A, 1725 RPM GUIDE POST MOTOR: UNIVERSAL DC, 40W TABLE SIZE 28' X 24" FLOOR TO TABLE HEIGHT 35-1/4" CUTTING CAPACITY/THROAT: 18-3/8" MAXIMUN CUTTING HEIGHT 19-1/2" BLADE SIZE: 166-168" LONG BLADE SPEED: 4975 FPM WHEELS: COMPUTER-BALANCED CAST IRON WITH RUBBER TIRES WHEEL COVERS: PREFORMED, HINGED STEEL BLADE GUIDES: DUAL BALL BEARING WITH FULL ENCLOSURE PROTECTION BEARINGS: SEALED AND PERMANENETLY LUBRICATED OVERALL SIZE 86-1/2" H X 36-5/8" W X 33" D FEATURES: RACK AND PINION, MOTORIZED UPPER BLADE GUIDE HEIGHT ADJUSTMENT BLADE TENSION GAUGE HEIGHT SCALE FOR UPPER BLADE GUIDES BLADE TRACKING WINDOW DUAL BALL-BEARING BLADE GUIDES MICRO ADJUSTING RACK AND PINION TABLE TILTING MECHANISM W/SUPPORT POST DELUXE CAST IRON FENCE WITH EXTRUDED ALUMINUM RE-SAW FENCE INCLUDED MITER GAUGE TWO 4" DUST PORTS TABLE TILTS 5 DEGREES LEFT, 45 DEGREES RIGHT QUICK-CHANGE BLADE RELEASE/TENSIONING COMPUTER-BALANCED CAST IRON WHEELS WITH RUBBER TIRES HINGED WEEL COVERS WITH SAFETY LOCK FOOT BRAKE CAST IRON TABLE TRUNNION MAGNETIC SWITCH WITH THERMAL OVEROAD PROTECTION PRECISION-GROUND CAST IRON TABLE POWDER COATED PAINT INCLUDE 1" BLADE INCLUDE SHIPPING IN PRICING, 1, EA; LI 003: SAWSTOP 10 " INDUSTRIAL CABINET SAW( MODEL #CS31230) SPECIFICATIONS AMPERAGE(A) : 13 ARBOR SIZE(IN) 0.625 STATIONARY BEVEL CAPACITY 45 DEGREES BEVEL DIRECTION LEFT BEVEL BLADE DIAMETER 10" BLADE MATERIAL, STANDARD STEEL WITH STEEL OR CARBIDE TIPPED TEETH BLADE SPEED 4000 RPM CSA CERTIFIED CORD LENGTH 6.5 ' DRIVE MOTOR BELT DRIVE DUST PORT DIAMETER 4" ELECTRICAL CORD CONFIGURATION 3-WIRE FENCE, FLESH SENSING SYSTEM 3 HRP MOTOR MAXIMUM CUT DEPTH 2.25" @ 45 DEGRTEES MAXIMUM CUT DEPTH 3.125" @90 DEGREES MAXIMUM DADO DIAMETER 8" MAXIMUM DAD WIDTH 0.81" MITER GAUGE MICRO ADJUST FENCE MITER SLOT DEPTH 0.375 MITER SLOT WIDTH 1 MOTOR BEARING 62mm X30mm ID, 52mm X25mm ID NUMBER OF MITER SLOTS 2 SINGLE PHASE RIP CAPACITY-LEFT 12.5" RIP CAPACITY-RIGHT 52" SPINDLE LOCK TABLE HEIGHT FROM FLOOR 34" TABLE SPACE IN FRONT OF BLADE 11" TABLE MATERIAL CAST IRON UL LISTED MUST HAVE THE SAFETY FEATURE THAT DETECTS THE DIFFERENCE BETWEEN WOOD AND THE OPERATOR.. STOP FEATURE INCLUDE SHIPPING IN PRICING, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DOJ BOP Field Offices -FCI FAIRTON intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOJ BOP Field Offices -FCI FAIRTON is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. As defined in the Federal Acquisition Regulation (FAR) 2.101, the terms ?offer? and ?offeror? refer to a response to a solicitation that, if accepted, would bind the submitter to perform the resultant contract. The terms ?bid? and ?bidder? refer to an offer submitted in response to an Invitation for Bid (IFB). The term ?proposal? refers to an offer submitted in response to a Request for Proposal (RFP). The terms ?quotation,? ?quote,? and ?quoter? refer to a non-binding submission in response to a Request for Quotation (RFQ) which is not an offer. Unless the Buyer indicates otherwise within a particular line item description, each Seller shall include in its online Bid/Proposal/Quotation individual pricing for all required line items in order to be considered for award (i.e., Do not use the ?Included in another line item? function when pricing each line item). If a line item cannot be separately priced, you must notify the buyer through the FedBid ?Submit a Question? feature regarding which line item(s) should be included in which other line item(s) and request reposting. Failure to comply with this term may result in the Bid/Proposal/Quotation being determined to be unacceptable. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid/Offer MUST be good for 60 calendar days after close of Buy, unless otherwise indicated. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. No partial shipments are permitted unless specifically authorized at the time of award. Q&A -Please submit all questions by using the 'Submit a Question' button. This buy will then be reposted with Q&A based on the questions that come in (if applicable). The Contracting Officer will indicate elsewhere in this Buy as to whether responses will be evaluated for award based either upon (a) price and pricing factors only (Bids/Quotes) or (b) price and other factors (Proposals/Quotes). All Bids/Proposals/Quotations must conform to the listed specifications or the Statement of Work. If award criteria are based upon (b) price and other factors, the Contracting Officer shall clearly indicate the criteria to be applied elsewhere in this Buy. In addition to providing pricing at www.FedBid.com for this solicitation, each Bidder/Offeror/Quoter must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this Buy. Submissions can be sent to clientservices@fedbid.com. For Exact Match Only Commodity Buys- NO SUBSTITUTIONS, EXACT MATCH ONLY. The Bidder/Offeror/Quoter may not substitute any item/service listed on this order without prior written approval from the BOP Contracting Officer. No other individual is authorized, either verbally or in writing to change part numbers, manufacturer, quantity, delivery dates, or any other specifications of this Buy. Items/services that do not conform to descriptions and part numbers found in this Buy will be rejected at the time of delivery causing a return at the contractor's expense. For all buys other than Exact Match Sellers MUST document what they are bidding for evaluation for award. Sellers must include, extended specs and/or manufacturer name and part numbers (if applicable). Failure to do this may result in non-consideration of the Bid/Proposal/Quotation. This information is REQUIRED in order for a seller?s Bid/Proposal/Quotation to be evaluated for award. FAR 52.211-6.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DOJ/BPR/PPB/FAIPG310010/listing.html)
 

Place of Performance

Address: Fairton, NJ 08320

Zip Code: 08320-2000
 

Record

SN03839727-W 20150816/150814235609-2459430871e7fb48306a49ecb03879c4 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |