SOLICITATION NOTICE
36 -- 3-Axis Spindle - 3-Axis Spinle
- Notice Date
- 8/14/2015
- Notice Type
- Presolicitation
- NAICS
- 423830
— Industrial Machinery and Equipment Merchant Wholesalers
- Contracting Office
- Department of the Air Force, Air Force Material Command, AFLCMC / AFSC / AFNWC - HILL AFB, ., Hill AFB, Utah, 84056, United States
- ZIP Code
- 84056
- Solicitation Number
- FA8224-15-R-0050
- Archive Date
- 9/15/2015
- Point of Contact
- Tyler V Fitz, Phone: 8017775486, David W. Bryan, Phone: 8015860526
- E-Mail Address
-
tyler.fitz@us.af.mil, david.bryan.8@us.af.mil
(tyler.fitz@us.af.mil, david.bryan.8@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Purchase Description/Specification for Milling Spindle Presolicitation Synopsis Fabrication of Critical Aircraft Components Short Title: 3-Axis Milling Machine Spindle Solicitation # F8224-15-R-0050 NOTICE OF INTENT TO SOLE SOURCE: This is a pre-solicitation synopsis in accordance with FAR 5.201. This is not a Request for Proposal (RFP) or an Invitation for Bid (IFB), nor is it to be construed as a commitment by the government. This synopsis is prepared in accordance with guidance found in FAR 5.207, and is prepared for the purpose of notifying potential offerors of an upcoming solicitation for service or supplies. The solicitation for this requirement will be posted under the same reference number as stated above. It is the contractor's responsibility to monitor FedBizOpps on a regular basis for the solicitation along with any amendments. The Ogden Air Logistics Complex (OO-ALC), Specialized Contracting Office (PZIMB), intends to negotiate with Hartwig Inc., on a sole source basis under the authority of 10 USC 2304(c)(1), as implemented by FAR 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements, to procure a 3-Axis Milling Machine. The spindle shall be installed on site as part of the purchase contract following the design specification of the manufacture which are to be included in the documentation for the equipment. The spindle shall be an Okuma PN: KU0200-276-108R decribed as ATT L-250 8K TTS and shall be designed to fit Okuma MCR-BII_HP, S/N 275.146908 twin column vertical mil with 20 x 40 table and provide 3 axis milling capabilities. Justification and Approval for other than full and open competition procedures. The Air Force will issue a contract for the procurment of an Hartwig Inc. 3-Axis Milling Machine Spindle to operate in Fabrication of Critical Aircraft Components. This purchase specification covers the general design and performance requirments for procurment of a CNC milling machine spindle as decribed herin. This includes all costs associated with purchase, handling, shipping, installation, training, runoff, testing, and follow-up services as sefined in the PS document attached. Proposals shall include a response to each numbered paragraph of this Purchase Specification indicating compliance or non-compliance with the paragraph's particular requirements. Each paragraph shall be numbered using the Purchase Specification paragraph numbers. Response to each paragraph shall state if the requirement will be met and specifically how it will be met. Where the proposal exceeds requirements or exceptions are taken, bid submittals shall provide specific information so the impact of the over-compliance or exception can be evaluated. This equipment shall be installed on an existing Okuma MCR-BII HP milling machine. Drawings of the spindle to support the operation of the equipment and all installation requirements shall be furnished as part of the offerors proposal. Offers which do not include sufficient information to permit a complete compliance review by Air Force personnel shall be rejected. For additional guidance please refer to the Purchase Description/Specification. The solicitation will be posted under the same number FA8224-15-R-0050 on FedBizOps during the month of August 2015. Please submit any questions concerning this requirement in writing to all listed below: Contract Specalist AFMC AFSC OL:H/PZIMB DAVID BRYAN 6038 ASPEN AVE B1289 2nd Floor HILL AFB UT 84056-5805 TEL: 801-777-5486 TYLER.FITZ@US.AF.MIL Contract Officer: AFMC AFSC OL:H/PZIMB DAVID BRYAN 6038 ASPEN AVE B1289 2nd Floor HILL AFB UT 84056-5805 TEL: 801- 586-7779 Email: david.bryan.8@us.af.mil
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/FA8224-15-R-0050/listing.html)
- Place of Performance
- Address: Hill AFB, Utah, 84056, United States
- Zip Code: 84056
- Zip Code: 84056
- Record
- SN03840188-W 20150816/150815000102-5e9cf3d8d8ade0c4cadb748d57284641 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |