MODIFICATION
56 -- Skid Steer Loader
- Notice Date
- 8/18/2015
- Notice Type
- Modification/Amendment
- NAICS
- 333120
— Construction Machinery Manufacturing
- Contracting Office
- Other Defense Agencies, U.S. Special Operations Command, USASOC, ATTN:E-2929, Fort Bragg, North Carolina, 28310
- ZIP Code
- 28310
- Solicitation Number
- H92239-T-15-4321
- Archive Date
- 9/5/2015
- Point of Contact
- Joshua J. Harris, Phone: 9104326323, C Scott Phelps, Phone: 9104326145
- E-Mail Address
-
joshua.j.harris@soc.mil, conway-phelps@soc.mil
(joshua.j.harris@soc.mil, conway-phelps@soc.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTES ARE BEING REQUESTED AND A WRITTEN SOLICITATION WILL NOT BE ISSUED. Solicitation document and incorporated provisions and clauses are those in effect through FAC 2015-83. It is the Contractor's responsibility to be familiar with all applicable clauses and provisions. Full text clauses are available at farsite.hill.af.mil. The North American Industry Classification System Code (NAICS) is 333120 (Construction Machinery Manufacturing) with a Size Standard of 750 employees. This requirement is 100% set aside for small business and only qualified offerors may submit quotes. This acquisition will result in a Firm Fixed Price (FFP) Purchase Order. The US Army Special Operations Command (USASOC) has a requirement for: Skid- Steer Loader. The contractor shall provide Contract Line Item Number (CLIN) 0001 with the following required specifications:  74 HP Tier 4 Turbo Diesel engine  Auxiliary hydraulics: variable flow  Backup Alarm  Interlock control system  Engine/hydraulic systems shutdown  Glow plugs (automatically activated)  Instrumentation: Engine temp, fuel gauges, hour meter, RPM and warning lights  Lift arm support  Lift Path: Radius  Suspension seat  Attachment control Kit (Controls the attachments to the skid-steer loader)  Lights front and rear  Operator cab (AC is required & Must be a sealed closed cab.)  Parking brake, seat bar seat belt  Roll over protective structure (meets SAE-J1043 & ISO 3449, Level 1)  Spark arrestor exhaust system  Heavy duty tires  Selectable joystick controls  High flow hydraulics  74" low profile bucket (bolt on cutting edge, 74") (72" low profile bucket is acceptable)  72" brush cat (Must be Heavy duty it will be used to maintain perimeter fence clearance from mangroves and pine trees.)  30C auger drive unit (auger mounting frame loaders and compact tractors, bumper kit, standard duty bit, 12")  Stump grinder  Backhoe (maximum dig depth 136in, max reach 166in, 6000lbs dig force, 4069 lbs. dipper dig force, 180 degree swing angle, hydraulic fold down stabilizer, max 135.7 in dig depth)  12" base class 3, cutting edge, 12" x-change standard duty trenching bucket, class 3 (weld on teeth) 1. CLIN 0002: Shipping and Handling 2. The Government will award a contract resulting from this RFQ to the responsible offeror whose offer conforms to this RFQ and is the "Best Value" to the Government. The following evaluation factors in descending order of importance will be used to evaluate offers: a. Technical Acceptability b. Price c. Delivery 3. Technical acceptability is defined as the contractor's ability to meet or exceed the requirement and will be evaluated on a Pass or No-Pass basis. Only those offers evaluated as Pass will be considered for award. Delivery is defined as the capacity and offeror affirmation to conform with, or better, the Required Delivery Date (RDD) of no later than 90 days of award. Offers shall remain valid for a minimum of 30 days. The point of contact for this action is SSG Joshua Harris at joshua.j.harris@soc.mil. (910) 432-6323 or Mr. Scott Phelps, conway-phelps@soc.mil, (910) 432-8598. All responding vendors must be actively registered in Systems Award Management (SAM). 4. A best value award will be made to the offeror submitting an offer found to be most advantageous to the government. If offered other than the requested specifications, value added variables will be considered most important in comparison to price alone. The government will determine technical acceptability during technical review. 5. Point of delivery and acceptance are as follows: Qty Location a. 1 Key West, FL 98433 The Required Delivery Date (RDD) is no later than 90 days of award. PARTIAL SHIPMENTS PER LOCATION WILL NOT BE AUTHORIZED RESPONSES/QUOTES ARE DUE NO LATER THAN 10:00AM EST, Friday, 21 August, 2015. Please submit responses directly to SSG Joshua Harris at joshua.j.harris@soc.mil and CC Mr. Scott Phelps, conway-phelps@.soc.mil. All quotes shall include the following: *Topside, multiple side view (left, right, front, rear), or angle diagram noting all measurements and specifications, *Color photograph, *Part Numbers, *Unit, and total price, *Federal Tax ID, *Cage Code and DUNS number, *Contact Information, *Payment/Discount Terms, *Delivery Time and Delivery Cost (Reminder: Partial Shipments per location are not authorized), *FOB Destination and any other remarks as necessary. QUESTIONS: Questions concerning this RFQ shall be submitted in writing no later than 10:00 a.m. EST, Tuesday, 18 August 2015. Questions must be submitted to the attention of SSG Joshua Harris at joshua.j.harris@soc.mil or faxed to (910) 432-9345. Telephonic questions pertaining to the technical requirement of this solicitation will not be answered. It is the offeror's responsibility to ensure email or faxed submissions are received by the administrator. If an acknowledgement is not received, please contact SSG Joshua Harris at (910) 432-6323 or Mr. Scott Phelps (910)432-8598. CLAUSE REFERENCES: FAR 52.212-2, Evaluation -- Commercial Items (JAN 1999) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforms to the solicitation and is the lowest price technically acceptable. The following evaluation factors in the descending order of importance will be used to evaluate offers: (1) Technical Acceptability (2) Price and (3) Delivery. 1. Technical acceptability is defined as the contractor's ability to: i. Meet or exceed the specification.* ii. Show acceptable past performance (i.e. capacity to perform the work, no active exclusions in SAM and no derogatory information in FAPIIS). *To ensure that sufficient information is available for technical evaluation, the offeror shall furnish descriptive material (technical information, brochures, or other information) necessary for the purchasing activity to determine whether the offered product meets the salient characteristics of the requirement. Offeror's not providing technical information may be excluded from competition. 2. Price. Requirement will be quoted as a Firm Fixed Price offer. Offers shall remain valid for a minimum of 30 days. 3. Delivery. Requested Delivery Date is 30 Days ARO. Offeror must specify Shipping Terms, FOB Destination, and cost expressed as Firm Fixed price or Not to Exceed Price with charges supported by actual shipping invoice. FAR 52.252-2, Clauses Incorporated by Reference (available at http://farsite.hill.af.mil) FAR 52.204-13, System for Award Management (SAM) Maintenance FAR 52.252-6 Authorized Deviations in Clauses (APR 1984) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any Defense Federal Acquisition Regulation (48 CFR 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. DFARS 252.211-7003, Item Unique Identification and Valuation (DEC 2013). (at http://farsite.hill.af.mil) a. Review IUID Equivalents at www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html b. All IUID will be affixed by the vendor to the piece of equipment and invoice using IUID procedures. c. IUID Helpdesk: 269-961-4745 or iuid.helpdesk@dla.mil. d. IUID Accounts: 269-961-4400 or iuid.accounts@dla.mil DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under about WAWF. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL. SOFARS 5652.201-9002, Authorized Changes only by the Contracting Officer with the following clause addenda: The address and email address of the Contracting Officer is Mr. Scott Phelps, HQ, USASOC, E-2929 Desert Storm Drive (Stop A), DCS, Contracting, Fort Bragg, NC 28310-9110, Fax: 910-432-9345; conway-phelps@soc.mil. SOFARS 5652.204-9003, Disclosure of Unclassified Information and Notification Requirements for Cyber Security Breaches (2013). (Revised June 2013) SOFARS 5652.214-9004, Technical and Contractual Questions Concerning This Solicitation (2001) Section L, all questions concerning this procurement, either technical or contractual, must be submitted in writing to the Contracting Office. No direct discussion between the technical representative and a prospective offeror will be conducted unless it is deemed necessary by the Contracting Officer. Send all questions to the following point of contact. The use of e-mail is highly encouraged.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/ODA/USSOCOM/FortBraggNC/H92239-T-15-4321/listing.html)
- Place of Performance
- Address: Key Wey, Florida, 98433, United States
- Zip Code: 98433
- Zip Code: 98433
- Record
- SN03843753-W 20150820/150819000016-ef23aa32852b942cf062397de14ebaca (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |