MODIFICATION
93 -- Delivered Materials - Composite Turf Reinforcement Mat (CTRM)
- Notice Date
- 8/20/2015
- Notice Type
- Modification/Amendment
- NAICS
- 423390
— Other Construction Material Merchant Wholesalers
- Contracting Office
- USACE District, Seattle, ATTN: CENWS-CT, PO Box 3755, Seattle, WA 98124-3755
- ZIP Code
- 98124-3755
- Solicitation Number
- W912DW-15-Q-0069
- Response Due
- 8/21/2015
- Archive Date
- 10/19/2015
- Point of Contact
- Galen Freed, 2063163891
- E-Mail Address
-
USACE District, Seattle
(galen.t.freed@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. C350 Turf Reinforcement Mat or Similar The composite turf reinforcement mat (C-TRM) shall be a machine-produced mat of 100% coconut fiber matrix incorporated into a permanent three- dimensional turf reinforcement matting. The matrix shall be evenly distributed across the entire width of the matting and stitch bonded between a super heavy duty UV stabilized nettings with 0.50 x 0.50 inch (1.27 x 1.27 cm) openings, an ultra heavy UV stabilized, dramatically corrugated (crimped) intermediate netting with 0.5 x 0.5 inch (1.27 x 1.27 cm) openings, and covered by an super heavy duty UV stabilized nettings with 0.50 x 0.50 inch (1.27 x 1.27 cm) openings. The middle corrugated netting shall form prominent closely spaced ridges across the entire width of the mat. The three nettings shall be stitched together on 1.50 inch (3.81cm) centers with UV stabilized polypropylene thread to form a permanent three- dimensional turf reinforcement matting. The C350 shall meet requirements established by the Erosion Control Technology Council (ECTC) Specification and the US Department of Transportation, Federal Highway Administration's (FHWA) Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects, FP-03 Section 713.18 as a Type 5A, B, and C Permanent Turf Reinforcement Mat. Installation staple patterns shall be clearly marked on the turf reinforcement matting with environmentally safe paint. All mats shall be manufactured with a colored thread stitched along both outer edges (approximately 2-5 inches [5-12.5 cm] from the edge) as an overlap guide for adjacent mats. Amendment 0001 This amendment is to: 1. Add spaces for vendor information to instructions to vendors page 2. Fix dates to agree w ith close of Friday 21 August 2014 at 2:00 PM Pacific See attached document 15Q00690001.pdf
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA67/W912DW-15-Q-0069/listing.html)
- Place of Performance
- Address: USACE District, Seattle ATTN: CENWS-CT, PO Box 3755 Seattle WA less than br greater than See specification for additional Place of Performance information
- Zip Code: 98124-3755
- Zip Code: 98124-3755
- Record
- SN03847374-W 20150822/150820235423-7913dfbd7c34edc935ea28140b26c217 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |