SOLICITATION NOTICE
66 -- Force-sensing Treadmill - Brand Name or Equal - Solicitation
- Notice Date
- 8/28/2015
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 339112
— Surgical and Medical Instrument Manufacturing
- Contracting Office
- Department of the Army, U.S. Army Medical Research Acquisition Activity, U.S. Army Medical Research Acquisition Activity, Attn: MCMR-AAA, 820 Chandler Street, Frederick, MD 21702-5014, Maryland, 21702-5014, United States
- ZIP Code
- 21702-5014
- Solicitation Number
- W81XWH-15-T-0404
- Archive Date
- 9/24/2015
- Point of Contact
- Abraham G. Pottenger, Phone: 3016192294
- E-Mail Address
-
abraham.g.pottenger.civ@mail.mil
(abraham.g.pottenger.civ@mail.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Solicitation This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. All quotations submitted with equivalent supplies shall provide a matrix that directly point back to all MEC's. Minimum Essential Characteristics Brand Name or Equal Force-sensing Treadmill ADVANCED MECHANICAL TECHNOLOGY, INC (AMTI) Double Belt Compact End-to-End treadmill With Incline (DBCEEWI-2) One (1) force-sensing above-floor treadmill is required with the following characteristics: -30-foot power cord -Must operate on 208 VAC, 3-phase, 20 amp Y connected power -Must use tandem belt design with less than 2 mm clearance between the two belts -Each belt must be at least 29 in (length) x 25 in (width) -Each belt travel direction must be reversible for uphill and downhill movement simulation -Must have a six-axis force plate under each belt (at least 2) oEach force plate must: Measure the ground reaction forces (Fx, Fy, Fz) Measure the moments (Mx, My, and Mz) Have a range of at least 8800 N in the z direction Have a range of at least 4500 N in the x direction Linearity and Hysteresis must be at least +/- 0.2% full scale output Have a minimum 30-foot cable from the force plate to the signal conditioner -Must have a signal conditioner for each force plate (at least 2) oEach signal conditioner must: Have at least 6 channels Provide analog and digital (at least USB format) outputs Have BNC-5K filters for each channel -Minimum 6.5-foot cables for each force plate must be provided (at least 2) oThese are breakout cables from the signal conditioner to the six (6) analog connectors for the force plates -Belts must have a maximum speed of at least 20kph, adjustable in at least.06 kph increments -Treadmill must be able to incline at least a maximum of 25% grade -Must have removable front and side handrails -Must have control system including: osoftware with belt speed, belt travel direction, and incline adjustment oCAN open network kit oHardware including workstation oFeedback and control cables -Must have a general maintenance kit -Must have on-site installation and training -Must have warranty: oAt least 5 years warranty for each of the load cells oAt least 1 year warranty for the treadmill and associated equipment -Must include shipping to Fort Rucker, AL 1. INSTRUCTIONS FOR THE PREPARATION AND SUBMISSION OF QUOTES Failure to submit all documents concurrently and in accordance with these instructions may render a quote unacceptable. The quote and supporting documentation shall be submitted electronically via email to Abraham Pottenger at abraham.g.pottenger.civ@mail.mil by the date and time specified on the cover page of this SF1449 Soliciation. 2. QUOTE AND SUPPORTING DOCUMENTATION EVALUATION To aid in evaluation, quote shall be practical, specific complete, and logically assembled. The quote shall be in a clear, concise format satisfying all requirements of this solicitation. It shall be in sufficient detail to demonstrate a clear understanding of the work to be accomplished. Quotes shall be valid for at least 90 days.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/USAMRAA/DAMD17/W81XWH-15-T-0404/listing.html)
- Place of Performance
- Address: FORT RUCKER, USA AEROMED RSCH LABBLDG, 6901FERRELL RD, FORT RUCKER AL 36362-5152, FORT RUCKER, Alabama, 36362, United States
- Zip Code: 36362
- Zip Code: 36362
- Record
- SN03861044-W 20150830/150828235031-95eca075c383f17389b46539b55d0c9a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |