SOLICITATION NOTICE
41 -- Cooling Tower Replacement
- Notice Date
- 9/1/2015
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- 1113 West Aurora Road, Sagamore Hills, OH 44067
- ZIP Code
- 44067
- Solicitation Number
- P15PS02786
- Response Due
- 9/4/2015
- Archive Date
- 3/2/2016
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is P15PS02786 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83-2. The associated North American Industrial Classification System (NAICS) code for this procurement is 333415 with a small business size standard of 750.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-09-04 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Canton, OH 44702 The DOI NPS MWR OHIO MABO requires the following items, Meet or Exceed, to the following: LI 001: Cooling Tower with VFD & Control Sensor - see attached SPECIFICATIONS. Vendor must provide product SPECIFICATIONS to include Make & Model of Cooling Tower, VFD & Control Sensor. Vendor must provide SUBMITTALS, which will consit of: All equipment documentation as outlined in the scope of work and product specifications to include Make & Model number of Cooling Tower, VFD & Control Sensor., 1, EA; LI 002: Installation - to include all items outlined in the scope of work and specifications., 1, AU; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DOI NPS MWR OHIO MABO intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOI NPS MWR OHIO MABO is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. (a) Definition. As used in this clause-- ?Energy-efficient product?? (1) Means a product that? (i) Meets Department of Energy and Environmental Protection Agency criteria for use of the Energy Star trademark label; or (ii) Is in the upper 25 percent of efficiency for all similar products as designated by the Department of Energy?s Federal Energy Management Program. (2) The term ?product? does not include any energy-consuming product or system designed or procured for combat or combat-related missions (42 U.S.C. 8259b). (b) The Contractor shall ensure that energy-consuming products are energy efficient products (i.e., ENERGY STAR? products or FEMP-designated products) at the time of contract award, for products that are? (1) Delivered; (2) Acquired by the Contractor for use in performing services at a Federally-controlled facility; (3) Furnished by the Contractor for use by the Government; or (4) Specified in the design of a building or work, or incorporated during its construction, renovation, or maintenance. (c) The requirements of paragraph (b) apply to the Contractor (including any subcontractor) unless? (1) The energy-consuming product is not listed in the ENERGY STAR? Program or FEMP; or (2) Otherwise approved in writing by the Contracting Officer. (d) Information about these products is available for? (1) ENERGY STAR? at http://www.energystar.gov/products; and (2) FEMP at http://www1.eere.energy.gov/femp/procurement/eep_requirements.html. (End of clause) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Government will award based on the Lowest Price Technically Acceptable (LPTA) from a responsible offeror that meets or exceeds the attached specifications. Technical evaluation will be based on product SPECIFICATIONS to include Make & Model of Cooling Tower, VFD & Control Sensor. (b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP). "Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov. Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice: 1. Copy of vendor invoice document in PDF format, which shows pricing breakdown for all line items. The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email from the Federal Reserve Bank of Boston (FRBB) prior to the contract award date, but no more than 3 - 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email IPPCustomerSupport@fms.treas.gov or phone (866) 973-3131. If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation. (End of Local Clause) (a) Upon receipt of accelerated payments from the Government, the Contractor shall make accelerated payments to its small business subcontractors under this contract, to the maximum extent practicable and prior to when such payment is otherwise required under the applicable contract or subcontract, after receipt of a proper invoice and all other required documentation from the small business subcontractor. (b) The acceleration of payments under this clause does not provide any new rights under the Prompt Payment Act. (c) Include the substance of this clause, including this paragraph (c), in all subcontracts with small business concerns, including subcontracts with small business concerns for the acquisition of commercial items. (End of Local Clause)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOI/NPS/APC-IS/P15PS02786/listing.html)
- Place of Performance
- Address: Canton, OH 44702
- Zip Code: 44702
- Zip Code: 44702
- Record
- SN03867068-W 20150903/150902000920-486f718ddf4387675e6c4f3186aded1d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |