SOURCES SOUGHT
13 -- Renovation of the M67 hand-fragmentation grenades - Sources Sought Notice
- Notice Date
- 9/4/2015
- Notice Type
- Sources Sought
- NAICS
- 332993
— Ammunition (except Small Arms) Manufacturing
- Contracting Office
- Department of the Navy, Naval Sea Systems Command, NSWC IHEODTD, 4072 North Jackson Road Suite 132, Indian Head, Maryland, 20640-5115, United States
- ZIP Code
- 20640-5115
- Solicitation Number
- N0017415SN0029
- Archive Date
- 9/5/2016
- Point of Contact
- Edward F. Rogan, Phone: 9737249277
- E-Mail Address
-
edward.rogan@navy.mil
(edward.rogan@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- Renovation of the M67 hand-fragmentation grenades - Sources Sought Notice This is a Sources Sought Synopsis. This synopsis neither constitutes a Request for Proposal, nor does it restrict the Government from an ultimate acquisition approach. This synopsis should not be construed as a commitment by the Government for any purpose. Requests for solicitation will not receive a response. All information is to be submitted at no cost or obligation to the U.S. Government. The U.S. Government reserves the right to reject, in whole or in part, any input as a result of this market survey. The U.S. Government is not obligated to notify respondents of the results of this survey. If a formal solicitation is generated at a later date, a solicitation notice will be published. No award will be made as a result of this market survey. The Naval Surface Warfare Center, Indian Head Explosive Ordnance Disposal Technology Division (NSWC IHEODTD) is seeking potential sources capable for the renovation of the M67 hand-fragmentation grenades by replacing M213 delay fuze and performing required exterior maintenance. All work to be performed in accordance with DMWR 9-1330-G881-F20 latest revision (Distribution-D); publication requests can be referred to U.S. Army RDECOM, ARDEC, Attn: RDAR-EIL-LA, Picatinny Arsenal, NJ 07806-5000. All new replacement M213 fuzes will be provided as Government Furnished Material. All other required components listed below will be provided by the performing activity as needed if missing or unserviceable. Current NSN NSN after renovation 1320-00-133-8244 (G881) 1330-01-563-0592 (G881) Components Required Part Number Nomenclature 13021905 Confidence Clip NSN Nomenclature 1330-01-595-5043 (G877) Fuze, Grenade, Hand M213 Assembly 1330-00-183-5996 Clip, Safety 5330-01-082-9072 (GX15) Retainer Washer, Steel 8140-00-828-2961 Box, Packing, Ammo f/ Grenade, Hand Frag., Delay 8140-00-828-2972 (GX17) Container, Fiber, Ammo, M415A1 f/ Grenade, Hand, Frag., Delay 1330-01-117-5280 Pull Ring Assembly 5330-01-111-7566 (GX16) Gasket, Rubber 8135-01-129-0835 Support, Plastic Renovation quantity shall be 30,344. Requirements breakdown is as follows: •· Transfer assets from storage location to work facility •· De-palletize, unload, segregate and verify correct assets •· Perform x-ray process on new M213 fuzes (GFM) •· Remove grenade from wooden box and fiber tube •· De-fuze grenade, remove steel retainer washer and rubber gasket •· Pack un-serviceable fuzes; set for demilitarization •· Gage grenade cavity liner, clean threads and transfer grenades to drying room •· Receive fuzes from x-ray facility •· Re-fuze grenade; install confidence clip, washer, and retainer •· Assign lot numbers/suffixes IAW MIL-STD-1168; no grand lots •· Touch-up and paint/mark grenades and fuzes as required •· Inspect and repair fiber tube and wooden box as required; replace as needed •· Paint and mark wooden box and fiber tubes as required •· Re-pack grenade in fiber tube •· Tape fiber tube and pack in wooden box; close and apply Type-1 traceable seals •· Load boxes onto pallets and re-palletize IAW DWG 19-48-4116/16P •· Transfer assets back to storage for Fleet issue •· Prepare ammunition data cards IAW MIL-STD-1168 and upload into W.A.R.P. •· Re-classify assets to Alpha condition code (or as directed) •· All wood packaging material shall be ISPM-15 compliant (heat-treat and stamp as required) All interested sources shall provide a company brochure or list of specifications, organization name, address, a point of contact, phone number, fax number, e-mail address, business size, taxpayer identification number, DUNS number, and CAGE Code. All responding sources must email their response submissions no later than 04:30PM on 04 October 2015 to: 1) NSWC IHEODTD, Picatinny Detachment Attn: Edward Rogan Code 022ER 3rd Avenue, Bldg. 61N Picatinny Arsenal, NJ 07806-5000 edward.rogan@navy.mil 973-724-9277 Large files need to be compressed using Zip and renamed with a.piz file extension.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSEA/N00174/N0017415SN0029/listing.html)
- Record
- SN03873969-W 20150906/150905000352-3350bbfbec22790981c27a6b95278816 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |