Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 11, 2015 FBO #5040
SOLICITATION NOTICE

59 -- 0010690273 Wireless Controller

Notice Date

9/9/2015
 

Notice Type

Presolicitation
 

Contracting Office

5330 Valdez Circle Bldg 5330 MS#1, Dugway, UT 84022
 

ZIP Code

84022
 

Solicitation Number

W911S6-15-P-0049
 

Response Due

9/10/2015
 

Archive Date

3/8/2016
 

Point of Contact

Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
 

E-Mail Address

Clientservices@fedbid.com;
 

Small Business Set-Aside

N/A
 

Description

Bids are being solicited under solicitation number W911S6-15-P-0049. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 750513_02. Army CHESS Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing Army CHESS contract. The contract must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's contract. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective Army CHESS contract AND upon approval from the soliciting contracting officer. This requirement is unrestricted and only qualified sellers may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-09-10 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Dugway, UT 84022 The MICC Dugway Proving Ground requires the following items, Brand Name or Equal, to the following: LI 001: Presite Survey in accordance with the Performance Work Statement Section 1.5 in full text attached., 1, EA; LI 002: Wireless Installation/Configuration Services in accordance with the Performance Work Statement Section 1.6 in full text attached., 1, EA; LI 003: Site Survey Documentation in accordance with the Performance Work Statement Section 1.8 in full text attached, 1, EA; LI 004: Testing: Test Configuration of two wireless clients in accordance with the Performance Work Statement in Section 1.9 in full text Attached., 1, EA; LI 005: Post Installation Site Survey in accordance with Performance Work Statement Section 1.10 in full text attached., 1, EA; LI 006: Training: "Knowledge Transfer" in accordance with Performance Work Statement Section 1.11 in full text attached. approximately 8 hours., 1, EA; LI 007: Project Management in accordance with Performance Work Statement Section 1.12., 1, EA; LI 008: Base Year Maintenance and repair of all inclusive Wireless systems installed under this contract, to include fully burdened but not limited to travel, rental, labor, help desk, and parts. For solicitation purposes only: This is an optional item to be technically review and is Subject to availability of funds. (SUBJECT TO AVAILABILITY OF FUNDS IN ACCORDANCE WITH FAR 52.232-18) FOB: Destination, 12, EA; LI 009: Equipment: 1 quantity 7210-US, Aruba 7210, 4X 10GBASE-X (SFP+), PSU-350-AC, 350W AC Power Supply,PC-AC-NA, AC Power Cord (N America Vers),AP-215, Aruba AP-215 Wireless Access Point, SN1-7210-US, NBD Spt for 7210-US (1 Yr), SN1-PSU-350-AC,NBD Spt for PSU-350-AC (1 year),SN1-LIC-1-AP, Spt for LIC-1-AP (1 Year),SN1-AP-215, NBD Spt for AP-215 (1 Year),SN1-LIC-RFP-16, Spt for LIC-RFP-16 (1 YR,SN1-LIC-RFP-8, Spt for LIC-RFP-8 (1 YR),SN1-LIC-PEFNG-16, Spt for LIC-PEFNG-16,SN1-LIC-PEFNG-8, Spt for LIC-PEFNG-8 1YR, SN1-LIC-16-AP, Spt for LIC-16-AP (1 Yr),SN1-LIC-8-AP, Spt for LIC-8-AP (1 Year), 1, EA; LI 010: Additional Licensing: LIC-1-AP, Access Point License,LIC-8-AP, Access Point License,LIC-16-AP, Access Point License;LIC-PEFNG-8, Policy Enforcement Firewall;LIC-PEFNG-16,Policy Enforcement Firewall;LIC-RFP-8,RF Protect Lic Including WIP/,LIC-RFP-16,RF Protect Lic Including WIP/;, 1, EA; LI 011: eCMRA Personnel Reporting:eCRMA reporting: The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: http://www.ecmra.mil/, and then click on ?Department of the Army eCMRA? or the icon of the DoDorganization that is receiving or benefitting from the contracted services. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2015. Contractors may direct questions to the help desk by clicking on ?Send an email? which is located under the Help Resources ribbon on the right side of the login page of the applicable Service/Component?s eCMRA website, 1, EA; LI 012: Option Period One Service pack maintenance of equipment and repair, software upgrade. All inclusive and not limit to include all FBO shipping, travel, rental car, help desk support, and labor. FOR SOLICITATION PURPOSE ONLY: Please state what is available with pricing and attach any list of items, licensing renewals required for service contract. (SUBJECT TO AVAILABILITY OF FUNDS IN ACCORDANCE WITH FAR 52.232-18) FOB: Destination, 12, months; LI 013: eCMRA Personnel Reporting:The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: http://www.ecmra.mil/, and then click on ?Department of the Army eCMRA? or the icon of the DoDorganization that is receiving or benefitting from the contracted services. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2015. Contractors may direct questions to the help desk by clicking on ?Send an email? which is located under the Help Resources ribbon on the right side of the login page of the applicable Service/Component?s eCMRA website?. FOR SOLICITATION PURPOSES: Offeror shall provide a breakout of components comprising the proposed price of eCMRA, or indicate if Not Separately Priced.", 1, EA; LI 014: Option Period Two service pack maintenance of equipment, and repair, with software upgrades. All inclusive and not limit to include all FBO shipping, travel, rental car, help desk support, and labor. FOR SOLICITATION PURPOSE ONLY: Please state what is available with pricing and attach any list of items, licensing renewals required for service contract. (SUBJECT TO AVAILABILITY OF FUNDS IN ACCORDANCE WITH FAR 52.232-18) FOB: Destination, 12, months; LI 015: eCMRA: The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: http://www.ecmra.mil/, and then click on ?Department of the Army eCMRA? or the icon of the DoDorganization that is receiving or benefitting from the contracted services. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2015. Contractors may direct questions to the help desk by clicking on ?Send an email? which is located under the Help Resources ribbon on the right side of the login page of the applicable Service/Component?s eCMRA website?. FOR SOLICITATION PURPOSES:Offeror shall provide a breakout of components comprising the proposed price of eCMRA, or indicate if Not Separately Priced.", 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Dugway Proving Ground intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Dugway Proving Ground is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Contact ClientServices@FedBid.com or call 1-877-9FEDBID to address any questions. New equipment ONLY, NO remanufactured products FOB Destination CONUS (CONtinental U.S.) No partial shipments unless otherwise specified. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The Offeror shall comply with the following FAR/DFARS clauses that the contracting officer has indicated as being incorporated in this solicitation by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: 52.204-7, Central Contractor Registration; 52.204-13, Central Contractor Registration Maintenance; 52.232-99 -- Providing Accelerated Payment to Small Business Subcontractors (DEVIATION); 252.204-7003 Control of Government Personnel Work Product; 252.204-7004 Alternate A, Central Contractor Registration; 252.211-7003 Item Identification and Valuation; 252.232-7010 Levies on Contract Payments; **OTHER CLAUSES AS DETERMINED APPLICABLE BY THE CONTRACTING OFFICER FOR THE SPECIFIC REQUIREMENT** U.S. Army Dugway Proving Ground operates on a four (4) day work week, Monday through Thursday, from 7:00 A.M. to 5:30 P.M. (local time) except for Federal Holidays. Deliveries will be accepted on regular scheduled work days between 7:00 A.M. and 4:30 P.M. (local time). The following Federal Holidays are observed: (a)References: Secretary of the Army memorandum ?Accounting for Contract Services? dated 7 Jan 2005. (b)Description: The Office of the Assistant Secretary of the Army (Manpower & Reserve Affairs) operates and maintains a secure Army data collection site where the Contractor will report ALL contractor personnel (including subcontractor personnel) required for the performance of this contract. (c)Delivery Instructions: The Contractor is required to completely fill in all of the information in the format using the following web address: https://contractormanpower.army.pentagon.mil. (d)Preparation Instructions: The required information includes: (1)Contracting Office; Contracting Officer; Contracting Officer'?s Technical Representative; (2)Contract Number; including task and delivery order number; (3)Beginning and ending dates covered by reporting period; (4)Contractor name, address, phone number, e-mail address, identity of contractor employee entering data; (5)Estimated direct labor hours (including sub-contractors); (6)Estimated direct labor hours paid this reporting period (including sub-contractors); (7)Total payments (including sub-contractors); (8)Predominant Federal Service Code (FSC) reflecting the services provided by the contractor (and separate predominant FSC for each sub-contractor if different); (9)Estimated data collection cost; (10)Organizational title associated with the Unit Identification Code (UIC) for the Army Requiring Activity; (11)Locations where contractor and sub-contractors perform the work (specified by zip code in the United States and nearest city, country, when in an overseas locations, using standardized nomenclature provided on the website); (12)Presence of deployment of contingency contract language; and (13)Number of contractor and sub-contractor employees deployed in theater this reporting period (by country). As part of its submission, the Contractor will also provide the estimated total cost (if any) incurred with this reporting requirement. Reporting period will be the period of performance not to exceed 12 months ending September 30th of each Government fiscal year and must be reported by 31 October of each calendar year. Contractors may use a direct XML data transfer to the database server or fill in the fields on the website. The XML direct transfer is a format for transferring files from the Contractor'?s systems to a secure web site without the need for separate data entries for each required data element at the web site. The specific formats for the XML direct transfer may be downloaded from the web site. During performance of work on the installation, the Contractor shall conform to all safety rules and requirements issued by the Dugway Safety Office. The Contractor shall take all reasonable steps and precautions to prevent accidents, and preserve and protect personnel and property. Any violations of established safety and accident prevention rules and regulations may be grounds for termination of this contract. Upon completion of service, the contractor shall furnish a service report to the Contracting Officer?s Representative listing date, model, serial number, location, service performed, hours spent, parts replaced and signed by an individual having knowledge of the service. Access to U.S. Army Dugway Proving Ground (DPG) requires that Contractor employees voluntarily submit personal data (e.g., name, social security number, etc.) when applying for a DPG Identification Card or temporary access pass. This information is routinely used by DPG Law Enforcement and Security personnel to conduct drivers license and criminal history / background checks. Adverse information revealed by such checks (e.g., outstanding criminal warrants, criminal history indicating a potential risk to DPG Installation security, or similar negative information indicating a potential security and/or Law Enforcement risk to DPG), may result in a denial of access and/or reentry to U.S. Army Dugway Proving Ground. Delays caused by any adverse employee information do not constitute a basis for claim by the Contractor. It is the Contractor'?s responsibility to assure all personnel scheduled to work on the installation have acceptable backgrounds. The prime contractor is responsible for security badges and/or protective masks issued to their employees and/or employees of their subcontractor(s). A designated representative (being an officer or supervisor of the prime contractor) shall co-sign for each individual when obtaining the required item(s). Additionally, the contractor shall provide to the Contracting Officer or the appointed Contracting Officer?'s Representative (COR) a list of employees requiring masks/badges under the awarded contract prior to initiation of work. The Contractor shall be required to submit a ?certificate of return? for all masks/badges from the cognizant office(s), to the Contracting Officer or the COR. For item(s) not returned, the replacement cost of the items will be deducted from the invoice or the Contractor will be invoiced if the replacement cost exceeds the amount due the Contractor. (a)In accordance with Section 326 of P.L. 102-484, the Government is prohibited from awarding any contract which includes a specification or standard that requires the use of a Class I ozone-depleting substance (ODS) identified in Section 602(a) of the Clean Air Act (42 U.S.C. 767a(a)), or that can be met only through the use of such a substance unless such use has been approved, on an individual basis, by a senior acquisition official who determines that there is no suitable substitute available. (b)To comply with this statute, the Government has conducted a best efforts screening of the specifications and standards associated with this acquisition to determine whether they contain any ODS requirements. To the extent that ODS requirements were revealed by this review, they are identified in Section C or the statement of work of this document. (c)If offerors possess any special knowledge about any other ODS required directly or indirectly at any level of contract performance, the U.S. Army would appreciated if such information was surfaced to the Contracting Officer for appropriate action. To preclude delay to the procurement, offerors should provide any information as soon as possible after release of the solicitation and prior to the submission of offers to the extent practicable. It should be understood that there is no obligation on offerors to comply with this request and that no compensation can be provided for doing so. Manufacturer or supplier must ensure that all OSHA standards applicable to that which is being purchased are complied with. The following insurance is required as a minimum; (a)Legally Required Insurance: Where certain laws apply such as State laws governing workman'?s compensation and employer'?s liability coverage, etc., the contractor, prior to commencement of work, shall furnish the Contracting Officer a written statement that such laws have been complied with and that compliance will continue throughout the period of contract performance. Minimum coverage of $100,000 is required. (b)Comprehensive General Liability & Automobile Liability: Each Person PerProperty OccurrenceDamage Comprehensive General LiabilityNone$500,000.00 Automobile Liability$200,000.00$500,000.00 If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters, AMC. The HQ, AMC-Level Protest program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolutions forum, rather than filing a protest with the General Accounting Office or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. HQ Army Material Command Office of Command Counsel 9301 Chapek Rd, Room 2-1SE3401 Ft. Belvoir, VA 22060-5527 Facsimile Number (703) 806-8866 or 8875 Packages sent by FEDEX or UPS should be addressed to: HQ Army Material Command Office of Command Counsel Room 2-1SE3401 1412 Jackson Loop Ft. Belvoir, VA 22060-5527 The AMC-level protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp If Internet access is not available, contact the contracting officer or HQ, AMC to obtain the AMC-Level Protest procedures. (a)All Contractor employees shall be identified as such by wearing badges at all times while performing work at this Government facility and when performing work for the Government under the scope of this contract at other installations or non-government sites to include attendance at meetings, seminars, etc. The badges may be either affixed to clothing or be displayed from a chain or other mechanism worn around the neck. Badges must include contractor'?s company name and employee'?s name. The badges shall be colored white with black lettering and a minimum badge size of 1.5 inches wide by 3 inches long. A company logo may be placed on the badge, at the company'?s discretion. No other items may be placed on the badge. b)Contractor workspace (office, laboratory, desk) shall contain a sign signifying the space is occupied by "?contractor employee(s)"? to ensure that Federal employees and the public know that they are not Federal employees. Coordinate location with the Contracting Officer?'s Representative. (c)Contractor employees shall initially identify themselves by name and company affiliation when answering the telephone, presenting briefings, conducting or attending meetings/seminars. (d)All Contractor correspondence (written, facsimile, and email display) shall include their company name. (a)The Government and the contractor understand and agree that the services to be delivered under this contract by the contractor to the Government are non-personal services and the parties recognize and agree that no employer-employee or master-servant relationships exist or will exist under the contract between the Government and the contractor and/or between the Government and the contractor'?s employees. It is therefore in the best interest of the Government to afford the parties a full and complete understanding of their respective obligations. (b)Contractor personnel under this contract shall not: (1)be placed in a position where they are appointed or employed by a Federal Officer, or are under the supervision, direction, or evaluation of a Federal Officer, Military or Civilian. (2)be placed in a staff or policy making position. (3)be placed in a position of command, supervision, administration of control over DA Military or Civilian Personnel, or personnel of other contractors, or become a part of the Government organization. (4)be used for the purpose of avoiding manpower ceilings or other personnel rules and regulations of DA or the Civil Service Commission. (5)be used in administration or supervision of military procurement activities. (c)Employee Relationship: (1)The services to be performed under this contract do not require the contractor or his employees to exercise personal judgment and discretion on behalf of the Government, but rather the contractor?'s employees will act and exercise personal judgment and discretion on behalf of the contractor. (2)Rules, regulations, directions, and requirements which are issued by command authorities under their responsibility for good order, administration, and security are applicable to all personnel who enter the installation, or who travel on Government transportation. This stipulation is not to be construed or interpreted to establish any degree of Government control which is inconsistent with a non-personal services contract. U.S. Army Dugway Proving Ground is located in a remote area. The main gate is approximately 90 miles southwest of Salt Lake City, Utah. Contractors may be required to travel up to 150 miles one way from Salt Lake City to reach some work sites. Contractors with valid U.S. government contracts will be allowed to hire non U.S. citizens to work at or visit U.S. Army Dugway Proving Ground (DPG) during performance of the contract. Contractor'?s shall adhere to the following process. A list of foreign national employees shall be provided to the DPG Counterintelligence, Law Enforcement, and Security Offices at least five (5) working days prior to arrival on post. A copy of the list shall also be submitted to the Contracting Officer or an appointed Contracting Officer'?s Representative (COR). The list will contain name, nationality, green card and social security number, date of birth, drivers license number and state where issued. The Contractor shall also list the date(s) foreign nationals will be on post. If a sensitive test or visit is scheduled during the dates provided, the Counterintelligence Office will inform the Contractor whether the work/visit may take place. Employees will not be allowed on Post until verification process is complete. Once verification has been received, the Counterintelligence Office is responsible to provide the Protocol Office the following information for badge preparation: Name, Company and Point-of-Contact. The Contracting Officer or COR will be responsible to pick-up the badges and holders, issue them to the visitor and return them at the end of the visit. Questions concerning this buy must be submitted at least as per the Request for quote on FEDBID prior to the established closing date to reasonably expect a response from the Government. Those questions not received within the proscribed date may not be considered. DFAR 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) (a) Definitions. As used in this clause-- Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization. Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. DFAR 252.201-7000 CONTRACTING OFFICER'S REPRESENTATIVE (DEC 1991) (a) "Definition. Contracting officer's representative" means an individual designated in accordance with subsection 201.602-2 of the Defense Federal Acquisition Regulation Supplement and authorized in writing by the contracting officer to perform specific technical or administrative functions. (b) If the Contracting Officer designates a contracting officer's representative (COR), the Contractor will receive a copy of the written designation. It will specify the extent of the COR's authority to act on behalf of the contracting officer. The COR is not authorized to make any commitments or changes that will affect price, quality, quantity, delivery, or any other term or condition of the contract. (End of clause) Funds are not presently available for this option period one and two. The Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer. Option to Extend the Term of the Contract (Mar 2000) (a) The Government may extend the term of this contract by written notice to the Contractor within ___60 days; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least _60__ days before the contract expires. The preliminary notice does not commit the Government to an extension. (b) If the Government exercises this option, the extended contract shall be considered to include this option clause. (c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed __3 years and 6 months____ (months)(years).
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/notices/1a2b0dc42d40c370d421473ac0f06f54)
 

Place of Performance

Address: Dugway, UT 84022

Zip Code: 84022-5000
 

Record

SN03877967-W 20150911/150910000123-1a2b0dc42d40c370d421473ac0f06f54 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |