MODIFICATION
53 -- Anchor Bolts for LD9 - Amendment 1
- Notice Date
- 9/22/2015
- Notice Type
- Modification/Amendment
- NAICS
- 332722
— Bolt, Nut, Screw, Rivet, and Washer Manufacturing
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, St. Paul, Attn: CEMVP-CT, 180 East Fifth Street, St. Paul, Minnesota, 55101-1678, United States
- ZIP Code
- 55101-1678
- Solicitation Number
- W912ES-15-T-0182
- Archive Date
- 10/9/2015
- Point of Contact
- Jesse Onkka, Phone: 6512905444, Shamron J. Richardson, Phone: 6512905415
- E-Mail Address
-
Jesse.L.Onkka@usace.army.mil, shamron.j.richardson@usace.army.mil
(Jesse.L.Onkka@usace.army.mil, shamron.j.richardson@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Amendment #1 Scope of Work for Bolts 1.) The purpose of this contract is to provide bolts for forming and pouring of a permanent concrete structure underneath the upstream bulkheads and for mounting timbers to the miter gates. 2.) The contractor shall quote a price of the bolts to include shipping of the product. 3.) Delivery date of the anchor bolts shall be on 20 November 2015. 4.) The wedge anchor bolt dimensions are as followed and should include a nut and washer for each. Lengths can be + or - ½": 50 each - ¾" x 10", steel with a thread length of at least 3" 50 each - ¾"x 8", steel with a thread length of at least 3" 30 each - ¾" x 8", stainless steel with a thread length of at least 3" 30 each - ¾" x 6", stainless steel with a thread length of at least 3" 2,500 each - ½" x 6", steel 200 each - ¼" x 4", steel 5.) The hardware for installing timbers to the gates should be as follows: 550 each - ¾" X 10" bolts, steel with a galvanized coating and a thread length of at least 3" 550 each - ¾" X 12" bolts, steel with a galvanized coating and a thread length of at least 3" 1,100 each - ¾" nuts with same thread pitch as bolts and with the galvanized coating 3,000 each - ¾" flat washers, galvanized coating, outside diameter is to be 2" 6.) The anchor bolts shall delivered to the Maintenance and Repair Section: Lock and Dam #9 4405 HWY 35 Genoa, WI 54632-0265 POC-Scott Uhl, Chief, Maintenance and Repair Office 651-290-5987 Cell 612-508-3156 Email scott.t.uhl@usace.army.mil 7.) A copy of all invoices shall be sent to: Fountain City Service Base Attn: Tammy Kime PO Box 397 431 North Shore Drive Fountain City, WI. 54629-0397
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA37/W912ES-15-T-0182/listing.html)
- Record
- SN03897657-W 20150924/150922235314-d4952806d824614a46c52e435583ad49 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |