MODIFICATION
78 -- F2KTAV5212A001
- Notice Date
- 9/22/2015
- Notice Type
- Modification/Amendment
- NAICS
- 339920
— Sporting and Athletic Goods Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Material Command, AFNWC/PZI - Kirtland, Installation Contracting Division, AFNWC/PZI, 8500 Gibson SE, Bldg 20202, Kirtland AFB, New Mexico, 87117-5606, United States
- ZIP Code
- 87117-5606
- Solicitation Number
- F2KTAV5212A001
- Archive Date
- 10/9/2015
- Point of Contact
- Phillip A. Scott, Phone: 5058537659
- E-Mail Address
-
phillip.scott@kirtland.af.mil
(phillip.scott@kirtland.af.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The NAICS Code for this solicitation is 339920, Size Standard 500 Employees. Solicitation/ Purchase Request number F2KTAV5212A001 is issued as a Request for Quote (RFQ). This document incorporates provisions and clauses that are in effect through Federal Acquisition Circular 2005-83 effective 03 Sep 2015. Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs." The Government intends to award one firm fixed price contract with one Contract Line Item Numbers (CLINs): CLIN 0001 CLSL - Integrity Summit Trainer Domestic BASE/Integrity Summit Trainer Console English 4 EA CLIN 0002 CMACO - Cable Motion Adjustable Cable Crossover frame white/ GLB/ shroud full 2 EA CLIN 0003 SS-AB - Insignia Series Abdominal white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud 2 EA CLIN 0004 SS-ADC - Insignia Series Assist Dip Chin - English / T-LB weight stack / standard full shroud / L trim / white frame / royal blue upholstery 2 EA CLIN 0005 SS-BC - Insignia Series Biceps Curl - white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud / L trim 2 EA CLIN 0006 SS-BE - Insignia Series Back Extension - white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud 2 EA CLIN 0007 SS-CE - Insignia Series Calf Extension - white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud / L trim 2 EA CLIN 0008 SS-CP - Insignia Series Chest Press - white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud / L trim 2 EA CLIN 0009 SS-HAB - Insignia Series Hip Abduction - white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud / L trim 2 EA CLIN 0010 SS-HAD - Insignia Series Hip Adduction - white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud / L trim 2 EA CLIN 0011 SS-LC - Insignia Series Leg Curl - white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud / L trim 2 EA CLIN 0012 SS-LE - Insignia Series Leg Extension - white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud / L trim 2 EA CLIN 0013 SS-PD - Insignia Series Pulldown - white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud / L trim 2 EA CLIN 0014 SS-PEC - Insignia Series Fly - white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud / L trim 2 EA CLIN 0015 SS-RW - Insignia Series Row - white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud / L trim 2 EA CLIN 0016 SS-SLP - Insignia Series Seated Leg Press - white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud / L trim 2 EA CLIN 0017 SS-SP - Insignia Series Shoulder Press - white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud / L trim 2 EA CLIN 0018 SS-TP - Insignia Series Triceps Press - white frame / royal blue upholstery / English / T-LB weight stack / standard full shroud / L trim 2 EA CLIN 0019 Freight & Installation 1 EA UNIT OF MEASURE: EA DESIRED DELIVERY DATE: 4 Weeks ARO F.O.B. DESTINATION Inspection and Acceptance: DESTINATION NOTE: Please provide a BRAND NAME quote for the item(s) below. FAILURE TO DO SO WILL MAKE THAT OFFEROR NON-RESPONSIVE AND WILL NOT BE CONSIDERED FOR AWARD. In accordance with the FAR 13.106-1(a)(2) Soliciting Competition, offerors are notified that award will be made on the basis of best value. Best value shall be determined by price and technically capability. All payments are to be paid via the Internet through the Wide Area WorkFlow (WAWF) system. WAWF may be accessed at https://wawf.eb.mil. WAWF training may be accessed online at http://www/wawftraining.com. Payment information may be accessed using the DFAS website at https://www.dfas.mil. Your purchase order/ contract number or invoice will be required to inquire status of your payment. Firms responding to this announcement shall include company name, DUNS number, cage code, point of contact, address, F.O.B. Destination, estimated delivery date, warranties if applicable and business size using NAICS Code 339920, Size Standard 500 Employees. Requests for Quotes (RFQs) are due no later than 24 Sept 2015 at 11:00 am MST (Mountain Standard Time). Quotes may are to be emailed to phillip.scott.7@us.af.mil. Identify your quotes with the corresponding program title and solicitation number: Solicitation: Life Fitness Solicitation number: F2KTAV5212A001 Electronic documents shall be submitted in.pdf,.doc, or.xls. Communication containing documents in any other format, including.zip, may be blocked or stripped by the Government's server and may not be received by this office. ADDITIONAL INFORMATION: Be advised that all interested parties must be registered in the System for Award Management (SAM) Database in order to receive an award. If you are not registered, you may request an application at (866) 606-8220 or through the SAM website at http://www.sam.gov or by email askSAM@gsa.gov. Interested parties must be valid in their Representations and Certification on SAM. Registration is processed through SAM. The following provisions and clauses apply to this procurement: FAR 52.204-7, System for Award Management FAR 52.204-13, System for Award Management Maintenance FAR 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations-Representation FAR 52.209-10, Prohibition on Contracting With Inverted Domestic Corporations FAR 52.212-1, Instructions to Offerors-Commercial Items FAR 52.212-3 Alt I, Offeror Representations and Certification-Commercial Items (all offerors shall include a completed copy of this provision with their proposal unless electronically filed in System for Award Management) FAR 52.212-4 Contract Terms and Conditions-Commercial Items FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. [in paragraphs (b) and (c) the following clauses apply 52.204-10, 52.209-6, 52.219-4, 52.219-28, 52.222-3; 52.222-19; 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-50, 52.223-18, 52.225-13, 52.232-33] FAR 52.219-1 Alt I, Small Business Program Representations FAR 52.232-39, Unenforceability of Unauthorized Obligations FAR 52.232-40, Providing Accelerated Payments to Small Business Subcontractors DFARS 252.203-7000, Requirements Relating to Compensation of Former DoD Officials DFARS 252.203-7005, Representation Relating Compensation of Former DoD Officials DFARS 252.203-7002, Requirement to Inform Employees of Whistleblower Rights DFARS 252.204-7003, Control of Government Personnel Work Product DFARS 252.204-7004 Alt A, Central Contractor Registration DFARS 252.204-7012, Safeguarding of Unclassified Controlled Technical Information DFARS 252.204-7011, Alternative Line Item Structure DFARS 252.211-7003, Item Identification and Valuation DFARS 252.223-7008, Prohibition of Hexavalent Chromium DFARS 252.225-7000, Buy American Statute-Balance of Payments Program Certificates DFARS 252.225-7001, Buy American and Balance of Payments Program DFARS 252.225-7002, Qualifying Country Sources as Subcontractors DFARS 252.225-7036, Buy American-Free Trade Agreement-Balance of Payments Program DFARS 252.225-7048, Export-Controlled Items DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports DFARS 252.232-7006, Wide Area Workflow Payment Instructions DFARS 252.232-7010, Levies on Contract Payments DFARS 252.243-7001, Pricing of Contract Modification DFARS 252.244-7000, Subcontracts for Commercial Items DFARS 252.247-7023, Transportation of Supplies by Sea Please fill out attached Provision for DFARS 252.209-7992 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law-Fiscal Year 2015 Appropriations. 52.225-18 - Place of Manufacture (a) Definitions. As used in this clause- "Manufactured end product" means any end product in Federal Supply Classes (FSC) 1000-9999, except- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. (b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) [ ] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) [ ] Outside the United States. (End of provision) 52.252-1 -- Solicitation Provisions Incorporated by Reference. As prescribed in 52.107(a), insert the following provision: Solicitation Provisions Incorporated by Reference (Feb 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/ (End of Provision) 52.252-2 -- Clauses Incorporated by Reference (Feb 1998). As prescribed in 52.107(b), insert the following clause: This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/vffara.htm 52.252-5 -- Authorized Deviations in Provisions. As prescribed in 52.107(e), insert the following provision in solicitations that include any FAR or supplemental provision with an authorized deviation. Whenever any FAR or supplemental provision is used with an authorized deviation, the contracting officer shall identify it by the same number, title, and date assigned to the provision when it is used without deviation, include regulation name for any supplemental provision, except that the contracting officer shall insert "(Deviation)" after the date of the provision. Authorized Deviations in Provisions (Apr 1984) (a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the provision. (b) (b) The use in this solicitation of any DEFENSE FEDERAL ACQUISITION REGULATION SUPPLEMENT (48 CFR Chapter 2) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of Provision) 252.203-7998 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements-Representation. (DEVIATION 2015-O0010) Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements-Representation (DEVIATION 2015-O0010) (FEB 2015) (a) In accordance with section 743 of Division E, Title VII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015 (Pub. L. 113-235), Government agencies are not permitted to use funds appropriated (or otherwise made available) under that or any other Act for contracts with an entity that requires employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The prohibition in paragraph (a) of this provision does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (c) Representation. By submission of its offer, the Offeror represents that it does not require employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (End of provision) 252.203-7999 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements. (DEVIATION 2015-O0010) PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS (DEVIATION 2015-O0010)(FEB 2015) (a) The Contractor shall not require employees or subcontractors seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The Contractor shall notify employees that the prohibitions and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect. (c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (d)(1) In accordance with section 743 of Division E, Title VII, of the Consolidated and Further Continuing Resolution Appropriations Act, 2015, (Pub. L. 113-235), use of funds appropriated (or otherwise made available) under that or any other Act may be prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause. (2) The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause. (End of clause) 252.209-7992 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law-Fiscal Year 2015 Appropriations. Include the attached provision in all solicitations that will use funds made available by the Consolidated and Continuing Appropriations Act, 2015 (Pub. L. 113-235), including solicitations for the acquisition of commercial items under FAR part 12. REPRESENTATION BY CORPORATIONS REGARDING AN UNPAID DELINQUENT TAX LIABILITY OR A FELONY CONVICTION UNDER ANY FEDERAL LAW-FISCAL YEAR 2015 APPROPRIATIONS (DEVIATION 2015-OO0005) (DEC 2014) (a) In accordance with sections 744 and 745 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), none of the funds made available by this or any other Act may be used to enter into a contract with any corporation that- (1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government; or (2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government. (b) The Offeror represents that- (1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, (2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. (End of provision) AFFARS 5352.201-9101 Ombudsman OMBUDSMAN (APR 2014) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Primary: Ms. Jeannine Kinder AFNWC/PZ (505)846-1924 jeannine.kinder@us.af.mil Alternate: Mr. Anthony Kaiser AFNWC/PZC (505)853-7666 anthony.kaiser@us.af.mil Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/HQ AFICA/AFISRA/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. (End of clause)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/377CONSKOC/F2KTAV5212A001/listing.html)
- Record
- SN03898767-W 20150924/150923000404-ad0bdf759152e4a68fdcae2b685cd329 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |