FBODaily.com | FedBizOpps: PRESOL | 71 | Furniture for Cutters - Required Documents

FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 25, 2015 FBO #5054
SOLICITATION NOTICE

71 -- Furniture for Cutters - Required Documents

Notice Date: 9/23/2015
Notice Type: Combined Synopsis/Solicitation
NAICS: 337127 — Institutional Furniture Manufacturing
Contracting Office: Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC), 2401 Hawkins Point Road, Building 31, Mail Stop 26, Baltimore, Maryland, 21226-5000, United States
ZIP Code: 21226-5000
Solicitation Number: HSCG40-15-Q-60141
Archive Date: 10/17/2015
Point of Contact: Ramona E. Hatfield, Phone: 4107626101
E-Mail Address: Ramona.E.Hatfield@uscg.mil
(Ramona.E.Hatfield@uscg.mil)
Small Business Set-Aside: Total Small Business
Description: Drawing FL-3306-40 Crews Berth w/Locker Under Drawing FL 3306-31 Crews Berth w/Locker Under 2 & 3 High Drawing FL-3306 25 - Fleet Funiture (101 pages) Required to be signed and returned with quote. Required document to be submitted with quote. (i) This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. (ii) Solicitation number HSCG40-15-Q-60141 applies, and is issued as a Request for Quote (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-83, effective, 3 Sep 2015. (iii) It is anticipated that a competitive price purchase order shall be awarded as a result of this synopsis/solicitation. This is a total small business set aside. The North American Industry Classification System (NAICS) code is 337127 and the small business standard is 500 employees for this requirement. All responsible sources may submit a quotation, which if timely received, shall be considered by this agency. (iv) The U.S. Coast Guard, Surface Forces Logistics Center (SFLC) intends to award a Firm Fixed Price Purchase Order. Award will be made on an all or none basis and lowest technically acceptable price. (v) The United States Coast Guard Surface Forces Logistics Center has a requirement for the following items. These items are also listed in the required documents and mey be easier to read: FURNITURE &emsp; 1 2115405Y152192116 1 2090-01-LG0-8313 BERTH, CPO 3-HIGH 79 1/4"L X 29 3/4"W X 80" H, LEFT HAND MODULAR RACK UNIT, WITH THE FOLLOWING FOR EACH BERTH: LIGHT, FAN, CURTAIN TRACK AND LEE STRAP KIT. EEED STOW BRKTS AND STEPS FOR TOP 2 BERTHS. LOWER BERTH TO HAVE COMBINATION LOCKER, EEED STOWAGE AND LOCKER UNDER BERTH. IAW NAVSEA DWG 804-5959312, DETAIL 20-D, TYPE XI, SIZE 4, STYLE 2. COLOR #23617 TAN, IAW FED STD 595B, POWDER COATING, MIL-PRF-24712A TYPE I, II CLASS 1 IS ACCEPTABLE. 2/EA ___________ _____________ Unit Price Total 2 2115405Y152192116 2 2090-01-LG0-8319 SUB-BASE, 4" X 20" X 36", STAINLESS STEEL - IAW NAVSEA DWG: S3306-921770. USED WITH SECRETARY DEPICTED IN NAVSEA DWG 805-1637639. NOTE: SUB-BASE IS FOR SECRETARY: 2090-00-878-2205 1/EA ___________ _____________ Unit Price Total 3 2115405Y152192116 3 2090-01-LG0-8315 BERTH, CPO 3-HIGH, 79 1/4"L X 29 3/4"W X 80" H, RIGHT HAND MODULAR RACK UNIT, WITH THE FOLLOWING FOR EACH BERTH: LIGHT, FAN, CURTAIN TRACK AND LEE STRAP KIT. EEED STOW BRKTS AND STEPS FOR TOP 2 BERTHS. LOWER BERTH TO HAVE COMBINATION LOCKER, EEED STOWAGE AND LOCKER UNDER BERTH. IAW NAVSEA DWG 804-5959312, DETAIL 20-D, TYPE XI, SIZE 4, STYLE 2. COLOR #23617 TAN, IAW FED STD 595B, POWDER COATING, MIL-PRF-24712A TYPE I, II CLASS 1 IS ACCEPTABLE. 1/EA ___________ _____________ Unit Price Total 4 2115405Y152192116 4 2090-01-LG0-8321 SUB-BASE BERTH: 2 1/2" H X 79 1/4" L X 29 3/4" W, STAINLESS STEEL, IAW NAVSEA: S3306-921770. BERTHS ARE DEPICTED IN NAVSEA DWG 804-5959312 PC# 41, SIZE 4. 3/EA ___________ _____________ Unit Price Total 5 2115405Y152192116 5 2090-01-LG0-8329 LOCKER, CREW, 20"W X 22"D X 75"H, WITH 4 DRAWERS, ALUMINUM, IAW NAVSEA 803-6397307 - TYPE 4. "COLOR" #23617 TAN, IAW FED STD-595B, POWDER COATING, MIL-PRF-24712A TYPE I, II CLASS 1 IS ACCEPTABLE. 6/EA ___________ _____________ Unit Price Total 6 2115405Y152192116 6 2090-01-LG0-8330 SUB-BASE, LOCKER, 40"W X 22" D X 4" HIGH, CREW, STAINLESS STEEL IAW NAVSEA S3306-921770. USED WITH TWO 20 " LOCKERS IAW 804-5959312. FOR LOCKERS SEE STK# 2090-01-LG0-8329 3/EA ___________ _____________ Unit Price Total 7 2115405Y152192116 7 2090-01-LG0-7345 SUB-BASE, SECRETARY, 4" HIGH, 300 SERIES STAINLESS STEEL, CONSTRUCTED IAW NAVSEA DWG. S3306-921770, DIMENSIONS TO ACCOMMODATE 36" SECRETARY 2090-00-878-2205. 1/EA ___________ _____________ Unit Price Total 8 2115405Y152192279 1 2090-01-LG0-5269 BERTH, CPO AND PASSENGER, LEFT HAND, COLOR 23617, ALUMINUM, IAW COAST GUARD FLEET DRAWING FL-3306-25, SHEET 2, 15 AND 52 1/EA ___________ _____________ Unit Price Total 9 2115405Y152192279 2 2090-01-LG0-5263 DESK, SINGLE PEDESTAL, LEFT HAND, 41 1/8" LONG, COLOR 23617, MODULAR, IAW FL3306-25 SHEET 40. NOTE: DESK MUST BE ABLE TO FIT THRU A 26" WIDE DOOR 4/EA ___________ _____________ Unit Price Total 10 2115405Y152192279 3 2090-01-LG0-5262 BOOKRACK, TYPE B, STEEL, COLOR 23617, IAW DRAWING FL-3306-25 SHEET 2 AND 45. 3/EA ___________ _____________ Unit Price Total 11 2115405Y152192279 4 2090-01-LG0-5270 SUB-BASE, BERTH, 4" STAINLESS STEEL, IAW NAVSEA DRAWING S3306-921770. NOTE: TO BE USED WITH BERTH 2090-01-LG0-5269. 1/EA ___________ _____________ Unit Price Total 12 2115405Y152192279 5 2090-0-1LG0-5264 WARDROBE, 74" H X 32"W X 22" D, 4 LOCKING DRAWERS, ALUMINUM, 2 LOCKING DOORS, CLOTHES ROD, CENTER PARTITION, COLOR 23617, BEIGE. IAW COAST GUARD FLEET DRAWING FL-3306-25 SHEET 2 AND 37. WITHOUT SUB-BASE 1/EA ___________ _____________ Unit Price Total 13 2115405Y152192279 6 2090-01-LG3-9870 LOCKER, CPO AND PASSENGER, ALUMINUM, LEFT HAND DOOR, 73" H X 24" W X 22" D, 3 DRAWERS, HAMPER, LOCKABLE COMPARTMENT, CLOTHES ROD, DOOR SUPPLIED WITH A TOWEL BAR, TIE BAR, SHELVES AND MIRROR TO BE CONSTRUCTED IAW FL-3306-25 SHT 2 AND 16 COLOR #23617 1/EA ___________ _____________ Unit Price Total 14 2115405Y152192279 7 2090-01-LG3-9863 LOCKER, CPO AND PASSENGER, RIGHT HAND, 73" H X 24" W X 22" D, 3 DRAWERS, HAMPER, LOCKABLE COMPARTMENT, CLOTHES ROD, DOR SUPPLIED WITH TOWEL BAR, TIE BAR, SHELVES AND MIRROR, COLOR 23617, IAW CG FLEET DWG FL-3306-25 SHEET 2 AND 16. W/O SUB-BASE. 1/EA ___________ _____________ Unit Price Total 15 2115405Y152192279 8 5340-01-LG0-5267 CLIP, 3" DIAMETER, HOLD DOWN, FURNITURE, STEEL 4/EA ___________ _____________ Unit Price Total 16 2115405Y152192279 9 2090-01-LG0-5297 SUB-BASE, WARDROBE, 4" HIGH, 300 SERIES SST, TO PROVIDE A 2 INCH TOE RECESS IAW NAVSEA S3306-921770. NOTE: 2090-01-LG0-5264 WARDROBE. 1/EA ___________ _____________ Unit Price Total 17 2115405Y152192279 10 2090-01-LG0-5298 SUB-BASE, LOCKER, 4" HIGH STAINLESS STEEL 24" W X 22" DEEP, 4" HIGH, WITH 2 INCH TOE RECESS, 300 SST, IAW NAVSEA DRAWING S3306-921770. NOTE: 2090-01LG3-9870 LH LOCKER 2090-01-LG3-9863 RH LOCKER. 2/EA ___________ _____________ Unit Price Total 18 2115405Y152192481 1 2090-01-LG0-5247 DESK, FLAT TOP, DOUBLE PEDESTAL, 54" OVERALL LENGTH, 5 DRAWER FILE CABINET, 1 CENTER DRAWER, ALUMINUM, BAKED ENAMEL, FED COLOR 23617, MODULAR, IAW DRAWING FL-3306-25 SHEET 42 COMPLETE WITH PEDESTAL BASE LEG ASSEMBLIES. TOP TO BE WILSONART ENGLISH OK # 7885T-6. NOTE: DESK MUST BE ABLE TO FIT THRU A 26" WIDE DOOR. 2/EA ___________ _____________ 19 2115405Y152192481 2 2090-00-878-2206 DRAWER LOCKER STATION, 36" MODULAR FURNITURE UNIT #16,ALUMINUM. FINISH: BAKED ENAMEL, FED CLR #23617. NOTES: IAW SFC #B-2A-10, NAVSEA DWG. 805-1637670. 1/EA ___________ _____________ Unit Price Total 20 2115405Y152192481 3 2090-01-LG0-7280 WARDROBE, C O, 48" X 72", ALUMINUM, FEDERAL COLOR 23617, IAW FL3306-25 SHEET 61 1/EA ___________ _____________ Unit Price Total 21 2115405Y152192481 4 2090-01-LG0-7282 BERTH, OFFICER, SINGLE, RIGHT HAND, 80 1/4" LONG X 35 3/4" WIDE ALUMINUM, FEDERAL COLOR 23617, HEADBOARD TO BE NAVY NAUGAHYDE/ VINYL IAW FL-3306-25, SHEET 22. CO MATTRESS TO BE 7210- 01-498-0306 1/EA ___________ _____________ Unit Price Total 22 2115405Y152192481 5 2090-01-LG0-7284 BERTH, OFFICER'S, DOUBLE, LEFT HAND, ALUMINUM, BAKED ENAMEL FINISH, FEDERAL STD COLOR 23617, CONSTRUCTED IAW FL-3306-25 SHEET 21 AND 52. 1/EA ___________ _____________ Unit Price Total 23 2115405Y152192481 6 2090-00-878-2205 SECRETARY, LOCKER & 4 DRAWERS 36" MODULAR FURNITURE UNIT #15,ALUMINUM. FINISH: BAKED ENAMEL, FED CLR #23617, TAN. NAVSEA DWG 805-1637639. NAVY SHIPBOARD FURNITURE CATALOG AVAILABLE ONLINE. NOTE: SUB-BASE FOR THIS UNIT IS 2090-00-LG0-7345 2/EA ___________ _____________ Unit Price Total 24 2115405Y152192481 7 2090-01-LG0-7400 BOOKRACK, 30" LONG, 20" HIGH, 13 1/4" DEEP. ALUMINUM. FINISH: BAKED ENAMEL, FED CLR #23617 (TAN). NOTES: SEE DWG. FL-3306-25, SHT. 45 1/EA ___________ _____________ Unit Price Total 25 2115405Y152192481 8 2090-01-LG0-7341 SUB-BASE, LOCKER, 4" HIGH, 300 SERIES STAINLESS STEEL CONSTRUCTED IAW NAVSEA DWG. NO. S3306-921770, DIMENSIONS OF SUB BASE TO ACCOMMODATE 36" DRAWER LOCKER STATION B-2A-1- 2090-01-878-2206 1/EA ___________ _____________ Unit Price Total 26 2115405Y152192481 9 2090-01-LG0-7340 SUB-BASE, WARDROBE, 4" HIGH, 300 SERIES STAINLESS STEEL, CONSTRUCTED IAW NAVSEA DWG. NO. S3306-921770, DIMENSIONS TO ACCOMMODATE 48 " X 72" WARDROBE 2090-01-LG0-7280. 1/EA ___________ _____________ Unit Price Total 27 2115405Y152192481 10 2090-01-LG0-7344 SUB-BASE, BERTH, 4" HIGH, 300 SERIES STAINLESS STEEL, CONSTRUCTED IAW NAVSEA DWG. S3306-921770, DIMENSIONS TO ACCOMMODATE OFFICERS SINGLE BERTH 2090-01-LG0-7282. 1/EA ___________ _____________ Unit Price Total 28 2115405Y152192481 11 2090-01-LG0-7343 SUB-BASE, DOUBLE BERTH, 4" HIGH. 300 SERIES STAINLESS STEEL CONSTRUCTED IAW NAVSEA DWG. S3306-921770, DIMENSIONS TO ACCOMMODATE OFFICERS DOUBLE BERTH 2090-01-LG0-7284. 1/EA ___________ _____________ Unit Price Total 29 2115405Y152192481 12 2090-01-LG0-7345 SUB-BASE, SECRETARY, 4" HIGH, 300 SERIES STAINLESS STEEL, CONSTRUCTED IAW NAVSEA DWG. S3306-921770, DIMENSIONS TO ACCOMMODATE 36" SECRETARY 2090-00-878-2205. 2/EA ___________ _____________ Unit Price Total 30 2115405Y152192481 13 2090-01-LG0-7346 SUB-BASE, WARDROBE, 4" HIGH, 300 SERIES STAINLESS STEEL, CONSTRUCTED IAW NAVSEA DWG. S3306-921770, DIMENSIONS TO ACCOMMODATE 24" WARDROBE 2090-00-802-8314. 2/EA ___________ _____________ Unit Price Total 31 2115405Y152192481 14 2090-01-LG3-9875 SUB-BASE, FILE CABINET, 4" HIGH, 300 STAINLESS STEEL, CONSTRUCTED IAW NAVSEA DWG. S3306-921770. DIMENSIONS TO ACCOMMODATE 18 1/2" WIDE X 36" HIGH VERTICAL FILE CABINET STOCK NO. 2090-01-LG0-7339 & 7389 1/EA ___________ _____________ Unit Price Total 32 2115405Y152192485 1 2090-01-LG0-7339 CABINET, FILE, 18 1/2" WIDE X 36" HIGH 3 DRAWER, VERTICAL FEDERAL STANDARD COLOR 23617, TURNBULL LLC MC-1100-3/0 OR EQUAL 1/EA ___________ _____________ Unit Price Total 33 2115405Y152192488 1 2090-01-LG0-5775 BERTH, CREWS, 2-HIGH, W/LOCKER UNDER, OA PAN SIZE 30 1/2" X 6'-7 1/2", I.A.W. DWG. FL-3306-25, SHT. 94, ALUMINUM, COLOR #23617, REFERENCE FL-3306-31. 2/EA ___________ _____________ Unit Price Total 34 2115405Y152192488 2 2090-01-LG0-5777 BERTH, CREWS, 2-HIGH, W/LOCKER UNDER, OA PAN SIZE 30 1/2" X 6'-7 1/2", I.A.W. DWG. FL-3306-25, SHT. 94, ALUMINUM, COLOR #23617, REFERENCE FL-3306-31. 5/EA ___________ _____________ Unit Price Total 35 2115405Y152192488 3 2090-01-LG0-5779 LOCKER, CREW, 22" DEEP X 24" WIDE X 75" HIGH, LEFT HAND, COLOR #23617, I.A.W. DWG. FL-3306-29, ALUMINUM 4/EA ___________ _____________ Unit Price Total 36 2115405Y152192488 4 2090-01-LG0-5800 LOCKER, CREW, 16" WIDE X 22" DEEP X 75" HIGH, RIGHT HAND, COLOR #23617, I.A.W. DWG. FL-3306-29, ALUMINUM 6/EA ___________ _____________ Unit Price Total 37 2115405Y152192488 5 2090-01-LG0-5802 STANCHION SET, FOR A 2- HIGH CREW'S BERTH, SET TI CONSIST OF 4 STANCHIONS, STEEL RECTANGULAR TUBING 1" X 3" X 16 GAGE X 8FT LONG. COMPLETE WITH DECK SOCKETS AND OVERHEAD CLIPS. ENAMEL PAINT, COLOR #23617 IAW FL-3306-25. FL-3306-31. NOTE: 2 HIGH BERTH IS 2090-01-LG0-5775 & 2090-01-LG0-5775. 2/SE ___________ _____________ Unit Price Total 38 2115405Y152192488 6 2090-01-LG0-5804 STANCHION SET, FOR A 3- HIGH CREW'S BERTH, ALUMINUM, COLOR #23617 IAW FL-3306-25. FL-3306-31 NOTE: CREW'S BERTH 2090-01-LG0-5777. 4/SE ___________ _____________ Unit Price Total 39 2115405Y152192488 7 2090-01-LG0-5807 SUB-BASE, LOCKER, 4" HIGH, 300 SERIES STAINLESS STEEL, CONSTRUCTED IAW NAVSEA DWG. NO. S3306-192770, DIMENSIONS TO ACCOMMODATE 22" W X 24" DEEP CREW'S LOCKER 2090-01-LG0-5779 4/EA ___________ _____________ Unit Price Total 40 2115405Y152192488 8 2090-01-LG0-5809 SUB-BASE, LOCKER, 4"HIGH, 300 SERIES STAINLESS STEEL, CONSTRUCTED IAW NAVSEA DWG. NO. S3306-921770, DIMENSIONS TO ACCOMMODATE 16" WIDE X 22 DEEP CREW'S LOCKER ARE 2090-01-LG0-5800 AND 2090-01-LG0-5780. 6/EA ___________ _____________ Unit Price Total 41 2115405Y152192488 9 2090-01-LG0-5826 SUB-BASE, LOCKER, 4" HIGH, 300 SERIES STAINLESS STEEL, CONSTRUCTED IAW NAVSEA DRAWING NO. S3306-921770, DIMENSIONS TO ACCOMMODATE 16" W X 22" DEEP LOCKER 2090-01-LG0-5800. 6/EA ___________ _____________ Unit Price Total 42 2115405Y152192489 1 2090-01-LG0-5780 LOCKER, CREW, 16" WIDE X 22" DEEP X 75" HIGH, LEFT HAND, W/SUB-BASE, COLOR #23617, I.A.W. DWG. FL-3306-29, ALUMINUM 6/EA ___________ _____________ Unit Price Total 43 2115405Y152192641 1 2090-01-LG0-8348 TABLE, WRITING, 40" LONG, BULKHEAD MOUNTED 1/EA ___________ _____________ Unit Price Total 44 2115405Y152192642 1 2090-01-LG0-8551 STRAP ASSEMBLY, LIFTING. FOR LIFTING HINGED BOTTOM BERTH. A.K.A. TRICING STRAP 35/AY ___________ _____________ Unit Price Total Delivery shall be no later than 15 November 2015. Delivery shall be made to: U.S. Coast Guard, Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore, MD 21226-5000. If additional costs apply to meet the 15 November 2015 delivery date the offeror shall identify said cost(s) in their quotation. PRESERVATION, PACKAGING, AND MARKING REQUIREMENTS: Preservation - For finished furniture only, the only preservation that should be required would be as needed to protect any finished surface from scratches or damage resulting from contact with internal blocking or bracing or anything inside the shipping container. Packaging - Each item, as defined by its unit of issue, shall be individually packaged in its own fiberboard shipping container which shall be in accordance with Federal Spec ASTM-D5118 and ASTM-D-1974. The complete line item shall fit the container or be fitted with sufficient blocking to prevent shifting during shipping and handling. All components that make up a line item, including mounting hardware, shall be placed in the container and secured in such a manner that pieces do not become separated. In the event an item, as defined by its unit of issue, will not physically fit into one container additional containers meeting the Fed Spec requirements shall be used. Marking - each container shall be marked with the item name, stock number, part number, cage code, purchase order number, quantity, unit of issue. Marking shall be in black block letters a minimum of 1 inch high. Bar coding is NOT required. Contractor shall include a packing slip for each container shipped. The packing list shall identify all items contained within each container, including item names, stock numbers, part numbers, quantities, etc. Smaller items such as bolts/screws must also be identified on the packing slip. INSPECTION AND ACCEPTANCE Inspection will take place at destination. Acceptance will be made at destination by a Government Representative. Acceptance will be contingent upon the Representative's verification of no damage in transit, correctness and completeness of the order, and conformance to all requirements. FAR clause 52.212-4, Contract Terms and Conditions - Commercial Items (May 2015) is incorporated by reference. FAR clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (May 2015) The following clauses within FAR 52.212-5 apply: 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Dec 2014) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. Laws 108-77, 108-78 (19 U.S.C. 3805 note)). 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2013) (Pub. L. 109-282) (31 U.S.C. 6101 note). 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Aug 2013) (31 U.S.C. 6101 note). 52.219-6, Notice of Total Small Business Aside (Nov 2011) (15 U.S.C. 644). 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2)). 52.222-3, Convict Labor (June 2003) (E.O. 11755). 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2014) (E.O. 13126). 52.222-21, Prohibition of Segregated Facilities (Apr 2015). 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246). 52.222-35, Equal Opportunity for Veteran (Jul 2014) (38 U.S.C. 4212). 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793). 52.222-37, Employment Reports on Veterans (Jul 2014) (38 U.S.C. 4212). 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627). 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011). 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83). 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Jul 2013) (31 U.S.C. 3332). The following Federal Acquisition Regulation clauses are incorporated by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address: http://farsite.hill.af.mil/vffara.htm. FAR 52.247-34 FOB Destination (Nov 1991) FAR 52.212-1 - Instructions to Offerors - Commercial Items (APR 2014) Offerors responding to this solicitation may submit their quotation in accordance with their standard commercial practices (e.g. on company letterhead, formal quotation form, etc.) however their quotation must include the following information: (1) The solicitation number; (2) The time specified in the solicitation for receipt of offers; (3) The name, address, and telephone number of the offeror; (4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; (5) DUNS/TIN (6) Terms of any express warranty; (7) Price and any discount terms; (8) "Remit to" address, if different than mailing address; (9) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically); (10) Acknowledgment of any solicitation amendments; (11) Past performance information (12) A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration. Past Performance Offerors shall furnish three past performance references for contracts that are ongoing or completed within the last three (3) years which are relevant to this requirement (i.e., the same or similar requirement) and are held with government (federal, state, local), private or commercial entities. References must include the following information: a. Name of Offeror b. Program Title c. Contract Number d. Contract type e. Contract dollar value f. Period of performance g. Place of performance h. Contracting activity i. Customer points of contact with telephone numbers and email addresses for the Procurement Contracting Officer (PCO), the Administrative Contracting Officer (ACO), and the Program Manager (PM). j. Brief description of worked performed. Explain the nature of the work involved and the extent the work involved is similar to the requirements contained herein. The following Homeland Security Acquisition Regulation provisions are applicable: HSAR 3052.209-70 PROHIBITION ON CONTRACTS WITH CORPORATE EXPATRIATES (JUNE 2006) (a) Prohibitions. Section 835 of the Homeland Security Act, 6 U.S.C. 395, prohibits the Department of Homeland Security from entering into any contract with a foreign incorporated entity which is treated as an inverted domestic corporation as defined in this clause, or with any subsidiary of such an entity. The Secretary shall waive the prohibition with respect to any specific contract if the Secretary determines that the waiver is required in the interest of national security. (b) Definitions. As used in this clause: Expanded Affiliated Group means an affiliated group as defined in section 1504(a) of the Internal Revenue Code of 1986 (without regard to section 1504(b) of such Code), except that section 1504 of such Code shall be applied by substituting `more than 50 percent' for `at least 80 percent' each place it appears. Foreign Incorporated Entity means any entity which is, or but for subsection (b) of section 835 of the Homeland Security Act, 6 U.S.C. 395, would be, treated as a foreign corporation for purposes of the Internal Revenue Code of 1986. Inverted Domestic Corporation. A foreign incorporated entity shall be treated as an inverted domestic corporation if, pursuant to a plan (or a series of related transactions)- (1) The entity completes the direct or indirect acquisition of substantially all of the properties held directly or indirectly by a domestic corporation or substantially all of the properties constituting a trade or business of a domestic partnership; (2) After the acquisition at least 80 percent of the stock (by vote or value) of the entity is held- (i) In the case of an acquisition with respect to a domestic corporation, by former shareholders of the domestic corporation by reason of holding stock in the domestic corporation; or (ii) In the case of an acquisition with respect to a domestic partnership, by former partners of the domestic partnership by reason of holding a capital or profits interest in the domestic partnership; and (3) The expanded affiliated group which after the acquisition includes the entity does not have substantial business activities in the foreign country in which or under the law of which the entity is created or organized when compared to the total business activities of such expanded affiliated group. Person, domestic, and foreign have the meanings given such terms by paragraphs (1), (4), and (5) of section 7701(a) of the Internal Revenue Code of 1986, respectively. (c) Special rules. The following definitions and special rules shall apply when determining whether a foreign incorporated entity should be treated as an inverted domestic corporation. (1) Certain stock disregarded. For the purpose of treating a foreign incorporated entity as an inverted domestic corporation these shall not be taken into account in determining ownership: (i) Stock held by members of the expanded affiliated group which includes the foreign incorporated entity; or (ii) Stock of such entity which is sold in a public offering related to an acquisition described in section 835(b)(1) of the Homeland Security Act, 6 U.S.C. 395(b)(1). (2) Plan deemed in certain cases. If a foreign incorporated entity acquires directly or indirectly substantially all of the properties of a domestic corporation or partnership during the 4-year period beginning on the date which is 2 years before the ownership requirements of subsection (b)(2) are met, such actions shall be treated as pursuant to a plan. (3) Certain transfers disregarded. The transfer of properties or liabilities (including by contribution or distribution) shall be disregarded if such transfers are part of a plan a principal purpose of which is to avoid the purposes of this section. (d) Special rule for related partnerships. For purposes of applying section 835(b) of the Homeland Security Act, 6 U.S.C. 395(b) to the acquisition of a domestic partnership, except as provided in regulations, all domestic partnerships which are under common control (within the meaning of section 482 of the Internal Revenue Code of 1986) shall be treated as a partnership. (e) Treatment of Certain Rights. (1) Certain rights shall be treated as stocks to the extent necessary to reflect the present value of all equitable interests incident to the transaction, as follows: (i) warrants; (ii) options; (iii) contracts to acquire stock; (iv) convertible debt instruments; and (v) others similar interests. (2) Rights labeled as stocks shall not be treated as stocks whenever it is deemed appropriate to do so to reflect the present value of the transaction or to disregard transactions whose recognition would defeat the purpose of Section 835. (f) Disclosure. The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.108-7001 through 3009.108-7003; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.108-7001 through 3009.108-7003, but it has submitted a request for waiver pursuant to 3009.108-7004, which has not been denied; or __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.108-7001 through 3009.108-7003, but it plans to submit a request for waiver pursuant to 3009.108-7004. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal. HSAR 3052.247-71 F.O.B. DESTINATION ONLY (DEC 2003) (vi) Offers are invited on the basis of f.o.b. destination only. Offers submitted on any other basis will be rejected as nonresponsive. (vii) FAR 52.212-2, Evaluation - Commercial Items (Oct 2014) The Government will award a fixed price purchase order resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be more advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: (1) Price; (2) Past Performance. 1. Price - The unit price of each item shall be multiplied by the actual quantity to arrive at a total price. The total price of all items shall be added together to arrived at an aggregate total. 2. Past performance - past performance shall be evaluated to determine offeror capabilities. In particular the offeror's ability to meet quality objectives, cost schedules, and delivery schedules. The Government may use past performance information obtained from any source to evaluate past performance. QUESTIONS PERTAINING TO THIS RFQ SHOULD BE DIRECTED TO: RAMONA HATFIELD at RAMONA.E.HATFIELD@USCG.MIL (viii) PLACE OF DELIVERY: U.S. Coast Guard, Surface Forces Logistics Center, 2401 Hawkins Point Road, Bldg. 88 Receiving Rm., Baltimore, MD 21226. All deliveries are to be made Monday through Friday between the hours of 7:00 AM and 1:00 PM EST. PREPARATION FOR DELIVERY: All material shipped to the U.S. Coast Guard, Surface Forces Logistics Center, Bldg. 88, Receiving Room, 2401 Hawkins Point Road, Baltimore, MD. 21226, on this purchase order, must be accompanied by an itemized packing list securely attached to the outside of the package. All packing lists shall cite the Purchase Order Number with the package in such a manner as to provide identification. Material shall be packed for shipment in such manner as to afford adequate protection to the item against corrosion, deterioration, and physical damage during shipment to Surface Forces Logistics Center locations. Package shall all provide adequate protection for warehouse storage and multiple shipments. All packages shall have the Purchase Order Number, Stock number (if applicable) and Vendor name and Part Number clearly marked on the exterior of the package. All deliveries are to be made Monday through Friday between the hours of 7:00 A.M. and 1:00 P.M. *PLEASE NOTE - NEW RECEIVING HOURS* (ix) Quotes are due by 30 September 2015 Questions and quotes may be emailed to RAMONA.E.HATFIELD@USCG.MIL. Contractors are responsible for verifying receipt of quotes. (x) POC is Ramona Hatfield, Purchasing Agent, 410-762-6101. Questions regarding this Request For Quote need to be submitted in writing to RAMONA.E.HATFIELD@USCG.MIL by 28 September 2015.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/USCGELC/HSCG40-15-Q-60141/listing.html)
Place of Performance: Address: 2401 Hawkins Point Rd, Baltimore, Maryland, 21226, United States; Zip Code: 21226
Record: SN03900090-W 20150925/150923235630-2efd86ecb600c006816b7adbcd00ea63 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

71 -- Furniture for Cutters - Required Documents