DOCUMENT
J -- Medivator Endoscope Service Maintenance - Attachment
- Notice Date
- 9/24/2015
- Notice Type
- Attachment
- NAICS
- 811219
— Other Electronic and Precision Equipment Repair and Maintenance
- Contracting Office
- Department of Veterans Affairs;Network Contracting Office 8 (248);Room 315, Bldg. 2;10,000 Bay Pines Blvd;Bay Pines FL 33744
- ZIP Code
- 33744
- Solicitation Number
- VA24815Q2160
- Response Due
- 9/29/2015
- Archive Date
- 10/29/2015
- Point of Contact
- Reginald Nettles
- E-Mail Address
-
ld.Nettles2@va.gov<br
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation number is VA248-15-Q-2160 and is issued as a Request for Quote (RFQ). This solicitation documents and incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-84, effective 03 Sep 2015. This solicitation starts 09/24/2015 and will end 09/29/2015 at 16:00 pm EST and is unrestricted. Network Contracting Activity 8 - Service Area Office -East intends to award a Firm Fixed Price contract for a service contract for Annual Service Maintenance of Medivator Endoscope Processor(s) located at the C.W. Bill Young VAMC, Bay Pine, FL and the Lee County Healthcare Center, Cape Coral, FL. This procurement is being conducted under the FAR part 13 and simplified acquisition procedures apply. The intent is to award a Firm-Fixed Price service contract with a base year Period Of performance of 1 Oct 2015 - 30 Sep 2016. Options are identified below, as required, but shall not exceed two one (1) year options. The North American Industrial Classification System (NAICS) code for this procurement is 811219 with a small business size standard of $20.5 million. This procurement is unrestricted and all eligible offerors may submit quotes. All offerors shall be registered in the System for Award Management (SAM) at https://www.sam.gov; and www.vetbiz.gov, if applicable, to be considered for an award of a federal contract. The record shall be complete and not missing elements such as representations and certifications. Contractors interested in providing these services should submit their quotes via email to Reginald.Nettles2@va.gov. Quotes shall be received 29 Sep 2015 at 16:00 p.m. Eastern Time Zone and reference the solicitation number. Please direct all questions regarding this procurement to Reginald L. Nettles, Contracting Specialist by phone at 727-399-3302 or fax 727-399-3346. The deadline for Request for Information (RFI) is 28 Sep 2015. The following Contract Line Items (CLINS) are applicable to this requirement. For detailed service description review the attached SOW. Primary FOB location is C.W. Bill Young VAMC, Bay Pines, FL and Lee county Healthcare Center, Cape Coral, FL. SCHEDULE OF SERVICES The contractor shall be responsible for providing all repair parts, software, transportation and service for maintenance of Medivator Endoscope Reprocessors, located at the C.W. Bill Young VAMC, Bay Pines, FL and Lee county Healthcare Center, Cape Coral, FL, in accordance with the terms and conditions herein. Contractors shall quote prices for all of the following Contract Line Item Number(s): CLINDESCRIPTIONQUANTITYUNITUNIT PRICETOTAL 1001Base Year ANNUAL MAINTENANCE ON ENDOSCOPE REPROCESSOR, MFG MEDIVATORS, SN# 71099003, EE# 88243, MODEL ADVANTAGE PLUS ADV-1008, LOCATION: BAY PINES 4C132-100-BP Period of Performance: 1 Oct 2015 -30 Sep 2016 12MO 1002Base Year ANNUAL MAINTENANCE ON ENDOSCOPE REPROCESSOR, MFG MEDIVATORS, SN# 65306504, EE# 74864, MODEL ADVANTAGE PLUS ADV-1008, LOCATION: BAY PINES 4C132-100-BP Period of Performance: 1 Oct 2015 -30 Sep 201612MO 1003Base Year ANNUAL MAINTENANCE ON ENDOSCOPE REPROCESSOR, MFG MEDIVATORS, SN# 71099009, EE# 88242, MODEL ADVANTAGE PLUS ADV-1008, LOCATION: BAY PINES 4C132-100-BP Period of Performance: 1 Oct 2015 -30 Sep 201612MO 1004Base Year ANNUAL MAINTENANCE ON ENDOSCOPE REPROCESSOR, MFG MEDIVATORS, SN# 63852502, EE# 72342, MODEL ADVANTAGE PLUS ADV-1008, LOCATION: LEE COUNTY 2B179-CC-OPC Limited to 2 years' service per manufacturer for this model. Period of Performance: 1 Oct 2015 -30 Sep 201612MO 1005Base Year ANNUAL MAINTENANCE ON ENDOSCOPE REPROCESSOR, MFG MEDIVATORS, SN# 66326337, EE# 75643, MODEL ADVANTAGE PLUS ADV-1008, LOCATION: LEE COUNTY 2B179-CC-OPC Period of Performance: 1 Oct 2015 -30 Sep 201612MO Base Year Total: 2001Option 1 ANNUAL MAINTENANCE ON ENDOSCOPE REPROCESSOR, MFG MEDIVATORS, SN# 71099003, EE# 88243, MODEL ADVANTAGE PLUS ADV-1008, LOCATION: BAY PINES 4C132-100-BP Period of Performance: 1 Oct 2016 -30 Sep 201712MO 2002Option 1 ANNUAL MAINTENANCE ON ENDOSCOPE REPROCESSOR, MFG MEDIVATORS, SN# 65306504, EE# 74864, MODEL ADVANTAGE PLUS ADV-1008, LOCATION: BAY PINES 4C132-100-BP Period of Performance: 1 Oct 2016 -30 Sep 201712MO 2003Option 1 ANNUAL MAINTENANCE ON ENDOSCOPE REPROCESSOR, MFG MEDIVATORS, SN# 71099009, EE# 88242, MODEL ADVANTAGE PLUS ADV-1008, LOCATION: BAY PINES 4C132-100-BP Period of Performance: 1 Oct 2016 -30 Sep 201712MO 2004Option 1 ANNUAL MAINTENANCE ON ENDOSCOPE REPROCESSOR, MFG MEDIVATORS, SN# 63852502, EE# 72342, MODEL ADVANTAGE PLUS ADV-1008, LOCATION: LEE COUNTY 2B179-CC-OPC Limited to 2 years' service per manufacturer for this model. Period of Performance: 1 Oct 2016 -30 Sep 201712MO 2005Option 1 ANNUAL MAINTENANCE ON ENDOSCOPE REPROCESSOR, MFG MEDIVATORS, SN# 66326337, EE# 75643, MODEL ADVANTAGE PLUS ADV-1008, LOCATION: LEE COUNTY 2B179-CC-OPC Period of Performance: 1 Oct 2016 -30 Sep 201712MO Option Year 1 Total: 3001Option 2 ANNUAL MAINTENANCE ON ENDOSCOPE REPROCESSOR, MFG MEDIVATORS, SN# 71099003, EE# 88243, MODEL ADVANTAGE PLUS ADV-1008, LOCATION: BAY PINES 4C132-100-BP Period of Performance: 1 Oct 2017 -30 Sep 201812MO 3002Option 2 ANNUAL MAINTENANCE ON ENDOSCOPE REPROCESSOR, MFG MEDIVATORS, SN# 65306504, EE# 74864, MODEL ADVANTAGE PLUS ADV-1008, LOCATION: BAY PINES 4C132-100-BP Period of Performance: 1 Oct 2017 -30 Sep 201812MO 3003Option 2 ANNUAL MAINTENANCE ON ENDOSCOPE REPROCESSOR, MFG MEDIVATORS, SN# 71099009, EE# 88242, MODEL ADVANTAGE PLUS ADV-1008, LOCATION: BAY PINES 4C132-100-BP Period of Performance: 1 Oct 2017 -30 Sep 2018 12MO 3004N/AN/AN/AN/AN/A 3005Option 2 ANNUAL MAINTENANCE ON ENDOSCOPE REPROCESSOR, MFG MEDIVATORS, SN# 66326337, EE# 75643, MODEL ADVANTAGE PLUS ADV-1008, LOCATION: LEE COUNTY 2B179-CC-OPC Period of Performance: 1 Oct 2017 -30 Sep 201812MO Option Year 2 Total: Grand Total: The following Federal Acquisition Regulation (FAR) and Veterans Affairs Acquisition Regulation (VAAR) provisions and clauses are applicable to this acquisition and are available for view at: http://www.acquisition.gov/far/index.html http://www.va.gov/oamm/oa/ars/policyreg/vaar/index.cfm FAR Provisions: 52.202-1Definitions (Nov 2013) 52.204-5 Women-Owned Business (Other Than Small Business) (Oct 2014) 52.204-7System for Award Management (JUL 2013) 52.204-8Annual Representations and Certifications (Nov 2014) 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Aug 2013) 52.209-7Information Regarding Responsibility Matters (JUL 2013) 52.212-1 Instructions to Offerors- Commercial Items (JUL 2013) QUOTATION SUBMISSION Offerors shall submit quotes electronically by the date and time in accordance with the Request for Quote instructions. The Offerors quote shall consist of three (3) volumes: Volume I -Technical; Volume II - Past Performance; and Volume III - Price. Offerors responses shall be submitted in accordance with the following instructions: a)Format. The proposal submission shall be clearly indexed and logically assembled. All pages of each index shall be appropriately numbered and identified by the complete company name, date and solicitation number in the header and/or footer. Quote page limitations are applicable to this procurement. The maximum page count is 25. Page size shall be no greater than 8 1/2" x 11" with printing on one side, only. The top, bottom, left and right margins shall be a minimum of one inch (1") each. Font size shall be no smaller than 12-point using Arial, Calibri, or Times New Roman fonts. Characters shall be set at no less than normal spacing and 100% scale. Tables and illustrations may use a reduced font size not less than 8-point and may be landscape. Line spacing shall be set at no less than single space. Each paragraph shall be separated by at least one blank line. Page numbers, company logos, and headers and footers may be within the page margins ONLY, and are not bound by the 12-point font requirement. Footnotes to text shall not be used. All proprietary information shall be clearly and properly marked. If the Offeror submits annexes, documentation, attachments or the like, not specifically required by this solicitation, such will count against the Offeror's page limitations unless otherwise indicated. Pages in violation of these instructions, either by exceeding the margin, font or spacing restrictions or by exceeding the total page limit for a particular volume, will not be evaluated. Pages not evaluated due to violation of the margin, font or spacing restrictions will not count against the page limitations. The page count will be determined by counting the pages in the order they come up in the print layout view. b)File Packaging. Files may be compressed (zipped) into one file entitled "quote.zip" using a file compression program (i.e. WinZip) or quote files may be submitted individually. c)Content Requirements. The Offeror shall confine submissions to essential matters, sufficient to define the quote and provide an adequate basis for evaluation. Offerors are responsible for including sufficient details, in a concise manner, to permit a complete and accurate evaluation of each quote. 52.212-2 Evaluation-Commercial Items (JAN 1999) The Government will award a Firm-Fixed Price contract to the responsible offeror meeting or exceeding the technical criteria. Offeror shall demonstrate their ability to meet these factors with their offer in accordance with Paragraphs I-III below, and offers shall meet the minimum qualifications below in order to be evaluated. Technical and past performance when combined is significantly more important than price. Technical acceptability is rated based on the following: I. Personnel Qualifications noted in paragraph 7. Submit certification, location, and proof of inventory. II. Past performance - a. Offerors shall provide a minimum of three (3) identified references when submitting their quote. Emphasis will be on recent, relevant past performance. Recent is defined as work performed within the last three years. Relevant is defined as work similar in size and scope of the work described in the Statement of Work (SOW). Since the Government may not necessarily interview all of the sources provided by the offerors, offeror shall explain the relevance of the data provided for each reference. Offerors are reminded that the Government may elect to consider data obtained from other sources. Evaluators may validate the information on past performance surveys, by contacting the points of contact directly, via email, or by phone. POC information should be documented and be available upon request. Offerors with no relevant past performance or whom information is not available, shall not be evaluated favorably or unfavorably on past performance. III. Price FAR Provisions: 52.212-3 Certifications and & Representations (NOV 2013) 52.216-1Type of Contract (APR 1984) The Government contemplates award of a Firm-Fixed Priced contract resulting from this solicitation. 52.233-2Service of Protest (SEP 2006) VAAR Provisions: 852.215-70 Service-Disabled Veteran-Owned and Veteran-Owned Small Business Evaluation Factors (DEC 2009) 852.233-70Protest Content/Alternative Dispute Resolution (JAN 2008) 852.233-71Alternative Protest Procedure (JAN 1998) 852.252-70Solicitation Provisions or Clauses Incorporated by Reference (JAN 2008) 852.270-1Representatives of Contracting Officers (JAN 2008) 852.273-74Award Without Exchanges (JAN 2003) FAR Clauses: 52.203-5Covenant Against Contingent Fees (May 2014) 52.203-6Restrictions on Subcontractor Sales to the Government. (Sep 2006) 52.203-7Anti-Kickback Procedures (May 2014) 52.203-17 Contractor Employee Whistleblower Rights and Requirements to Inform Employees of Whistleblower Rights (Apr 2014) 52.204-4Printed or Copied Double-Sided on Postconsumer Fiber Content Paper (MAY 2011) 52.204-9 Personal Identity Verification of Contractor Personnel 52.212-4 Contract Terms and Conditions- Commercial Items (SEP 2013) 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (SEP 2013) o52.204-10Reporting Executive Compensation and First-Tier Subcontract Awards (JUL 2013) o52.209-6Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (AUG 2013) o52.222-3Convict Labor (JUN 2003) o52.222-19 Child Labor - Cooperation with Authorities and Remedies (MAR 2012) o52.222-21 Prohibition of Segregated Facilities (FEB 1999) o52.222-26 Equal Opportunity (MAR 2007) o52.222-35 Equal Opportunity for Veterans (SEP 2010) o52.222-36 Affirmative Action for Workers with Disabilities (OCT 2010) o52.223-18Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011) o52.232-33Payment by Electronic Funds Transfer- System for Award Management (JUL 2013) 52.219-13Notice of Set-Aside of Orders (Nov 2011) 52.232-40Providing Accelerated Payment to Small Business Subcontractors (DEC 2013) 52.237-3Indemnification and Medical Liability Insurance (JAN 2008) 52.252-2 Clauses Incorporated by Reference (FEB 1998) VAAR Clauses: 852.203-70Commercial Advertising (JAN 2008) 852.203-71 Display of Department of Veterans Affairs hotline poster 852.215-71 Evaluation Factor Commitments (DEC 2009) 852.228-71 Indemnification and Insurance (JAN 2008) 852.232-72Electronic Submission of Payment Requests (NOV 2012) 852.237-70Contractor Responsibilities (APR 1984)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/VA/BPVAMC/VAMCCO80220/VA24815Q2160/listing.html)
- Document(s)
- Attachment
- File Name: VA248-15-Q-2160 VA248-15-Q-2160.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2338514&FileName=VA248-15-Q-2160-000.docx)
- Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2338514&FileName=VA248-15-Q-2160-000.docx
- File Name: VA248-15-Q-2160 P09- SOW (Final)1.pdf (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2338515&FileName=VA248-15-Q-2160-001.pdf)
- Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2338515&FileName=VA248-15-Q-2160-001.pdf
- Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
- File Name: VA248-15-Q-2160 VA248-15-Q-2160.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2338514&FileName=VA248-15-Q-2160-000.docx)
- Record
- SN03901839-W 20150926/150924235443-f35d516a5aef28047082a8ec30a4bee9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |