Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 27, 2015 FBO #5056
MODIFICATION

71 -- Office Furniture

Notice Date
9/25/2015
 
Notice Type
Modification/Amendment
 
Contracting Office
9410 Jackson Loop, Fort Belvoir, VA 22060
 
ZIP Code
22060
 
Solicitation Number
W91247-15-T-FSWC
 
Response Due
9/25/2015
 
Archive Date
3/23/2016
 
Point of Contact
Name: Rosalynd Clayton, Title: Contract Specialist, Phone: 9103963058, Fax: 7038063355
 
E-Mail Address
Rosalynd.d.clayton.civ@mail.mil;
 
Small Business Set-Aside
HUBZone
 
Description
AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W91247-15-T-FSWC and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-84. The associated North American Industrial Classification System (NAICS) code for this procurement is 337215 with a small business size standard of 500.00 employees.This requirement is a [ Total HUB-Zone ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-09-25 13:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Bragg, NC 28310 The MICC Fort Bragg requires the following items, Meet or Exceed, to the following: LI 001: Double Pedestal Desk requires same key lockable file drawers utilizing full extension ball bearing slides, one (1) built in pedestal with two (2) box drawers, paired with a file drawer for office supplies or personal effects. Plus two (2) file drawers that are built-in the second pedestal, which accommodate letter, legal-size or A4-size files. No preference on the type of drawer pulls, a minimum of 1" thick top, full height modesty panels. Dimensions no less than 70"W x 36"D x 28"H and no greater than 72"W x 36"D x 30"H, 11, EA; LI 002: Double Pedestal Desk requires same key lockable file drawers utilizing full extension ball bearing slides, one (1) built in pedestal with two (2) box drawers, paired with a file drawer for office supplies or personal effects. Plus two (2) file drawers that are built-in the second pedestal, which accommodate letter, legal-size or A4-size files. No preference on the type of drawer pulls, a minimum of 1" thick top, full height modesty panels Dimensions no less than 59''W x 29"D x 28"H and no greater than 60"W x 30"D x 30"H, 4, EA; LI 003: Double Pedestal Credenza requires same key lockable file drawers utilizing full extension ball bearing slides; two (2) file pedestals with two (2) file drawers each which can accommodate letter, legal-size or A4-size files. No preference on the type of drawer pulls, a minimum of 1" thick top, full height modesty panels. Dimensions no less than 70"W x 23"D x 28"H and no greater than 72"W x 24"D x 30"H., 1, EA; LI 004: Single Pedestal Credenza that can lock, with any variation of Box/File drawers utilizing full extension ball bearing slides and which can accommodate letter, legal-size or A4-size files. No preference on the type of drawer pulls, a minimum of 1" thick top, full height modesty panels. Right hand single pedestal credenza Dimensions no less than 70"W x 23"D x 28"H and no greater than 72"W x 24"D x 30"H., 3, EA; LI 005: Single Pedestal Credenza shall lock, and have any variation of Box/File drawers utilizing full extension ball bearing slides and which can accommodate letter, legal-size or A4-size files. No preference on the type of drawer pulls, a minimum of 1" thick top, full height modesty panels. Left hand single pedestal credenza with the dimensions no less than 70"W x 23"D x 28"H and no greater than 72"W x 24"D x 30"H., 3, EA; LI 006: Single Pedestal Return shall lock, and have any variation of Box/File drawers utilizing full extension ball bearing slides and which can accommodate letter, legal-size or A4-size files. No preference on the type of drawer pulls, a minimum of 1" thick top, full height modesty panels. Right hand single pedestal return Dimensions no less than 42"W x 23"D x 28"H and no greater than 48"W x 24"D x 30"H., 5, EA; LI 007: Single Pedestal Return shall lock, and have any variation of Box/File drawers utilizing full extension ball bearing slides and which can accommodate letter, legal-size or A4-size files. No preference on the type of drawer pulls, a minimum of 1" thick top, full height modesty panels. Left hand single pedestal returns Dimensions no less than 42"W x 23"D x 28"H and no greater than 48"W x 24"D x 30"H., 5, EA; LI 008: Hutch w/ Doors and Pigeonholes mounts on 72"W double pedestal desk or credenza, no preference on number of doors, type or method of opening or locking feature. Attached task light, full width tack board. Hutches Dimensions no less than 71"W x 15"D x 40"H and no greater than 72"W x 16"D x 45"H, 16, EA; LI 009: Storage/Wardrobe Unit with no preference on whether it can/cannot lock, shall have up to three (3) adjustable shelves, full width clothes hanger bar. Dimensions no less than 18"W x 24"D x 65"H and no greater than 24"W x 24"D x 73"H, 16, EA; LI 010: Task Chair shall be 360-degree swivel, pneumatic seat height chairs of soft mesh mid backrest with fabric seat upholstery, multifunction controls, cylinder / base / caster / adjustable arms / armrest preference, in black or dark fabric. Dimensions no less than 27"W x 27"D x 33"H, 18" Width between arms and no greater than 30"W x 30"D x 52"H, 22" Width between arms, 46, EA; LI 011: Installation, 1, JOB; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Bragg intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Bragg is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Bid MUST be good for 30 calendar days after submission Evaluation Criteria/Basis of Award Sellers understand that FedBid ranks all Bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified in the Buy Terms, below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price and technical acceptability. Quotes shall include brochures of proposed furniture to include item descriptions and dimensions. Failure to include required information may render quotes ineligible for further consideration.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/notices/23bfe68e4be808ad70ed45e2a888f77e)
 
Place of Performance
Address: Fort Bragg, NC 28310
Zip Code: 28310
 
Record
SN03904373-W 20150927/150925235617-23bfe68e4be808ad70ed45e2a888f77e (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.