FBODaily.com | FedBizOpps: MOD | R | INTRUSION DETECTION

FBO DAILY - FEDBIZOPPS ISSUE OF OCTOBER 02, 2015 FBO #5061
MODIFICATION

R -- INTRUSION DETECTION

Notice Date: 9/30/2015
Notice Type: Modification/Amendment
Contracting Office: 2021 Club Road, Fort Bliss, TX 79916
ZIP Code: 79916
Solicitation Number: BUY_754623
Response Due: 9/23/2015
Archive Date: 3/21/2016
Point of Contact: Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
E-Mail Address: Clientservices@fedbid.com;
Small Business Set-Aside: HUBZone
Description: CANCELLATION NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is BUY_754623 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-84. The associated North American Industrial Classification System (NAICS) code for this procurement is 561621 with a small business size standard of $20.50M.This requirement is a [ Total HUB-Zone ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-09-23 13:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be, null null The MICC Fort Bliss requires the following items, Meet or Exceed, to the following: LI 001: INTRUSION DETECTION As stated on the attached Performance Work Statement. Period of Performance: 29 September 2015 to 28 September 2016., 1, JOB; LI 002: EQUIPMENT AND SUPPLY As stated on the attached Performance Work Statement. Period of Performance: 29 September 2015 to 28 September 2016., 1, EACH; LI 003: MATERIAL FREIGHT, 1, EACH; LI 004: ENGINNEERING AND DESIGN, 1, EACH; LI 005: PLAN DEVELOPMENT, 1, EACH; LI 006: CLOSE OUT DOCUMENTATION., 1, EACH; LI 007: Contracting Manpower Report Contractor is required to enter all contractor data into Contract Manpower Reporting system IAW the PWS. Data must be accurate, complete and entered into the CMR prior to 31 October 2015. The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract via a secure data collection site. The contractor is required to completely fill in all required data fields using the following web address: http://www.ecmra.mil/ Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year, beginning with 2015. Contractors may direct questions to the help desk at help desk at: http://www.ecmra.mill, 1, EACH; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Bliss intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Bliss is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This clause implements the temporary policy provided by OMB Policy Memorandum M-12-16, Providing Prompt Payment to Small Business Subcontractors, dated July 11, 2012 (a) Upon receipt of accelerated payments from the Government, the contractor is required to make accelerated payments to small business subcontractors to the maximum extent practicable after receipt of a proper invoice and all proper documentation from the small business subcontractor. (b) Inclue the substance of this clause, including this paragraph (b), in all subcontracts with small business concerns. (c) The acceleration of payments under this clause does not provide any new rights under the Prompt Payment Act. (a) Definitions. As used in this clause? ?Central Contractor Registration (CCR) database? means the retired primary Government repository for Contractor information required for the conduct of business with the Government. ?Commercial and Government Entity (CAGE) code? means? (1) A code assigned by the Defense Logistics Agency (DLA) Logistics Information Service to identify a commercial or Government entity; or (2) A code assigned by a member of the North Atlantic Treaty Organization that DLA records and maintains in the CAGE master file. This type of code is known as an ?NCAGE code.? ?Data Universal Numbering System (DUNS) number? means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities. ?Data Universal Numbering System+4 (DUNS+4) number? means the DUNS number means the number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at Subpart 32.11) for the same concern. ?Registered in the SAM database? means that? (1) The Contractor has entered all mandatory information, including the DUNS number or the DUNS+4 number, into the SAM database; (2) The Contractor?s CAGE code is in the SAM database; and (3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS), and has marked the record ?Active?. The Contractor will be required to provide consent for TIN validation to the Government as a part of the SAM registration process. ?System for Award Management (SAM)? means the primary Government repository for prospective federal awardee information and the centralized Government system for certain contracting, grants, and other assistance related processes. It includes? (1) Data collected from prospective federal awardees required for the conduct of business with the Government; (2) Prospective contractor submitted annual representations and certifications in accordance with FAR Subpart 4.12; and (3) The list of all parties suspended, proposed for debarment, debarred, declared ineligible, or excluded or disqualified under the nonprocurement common rule by agencies, Government corporations, or by the Government Accountability Office. (b)(1) The Contractor shall be registered in the SAM database prior to submitting an invoice and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation. (2) The SAM registration shall be for the same name and address identified on the contract, with its associated CAGE code and DUNS or DUNS+4. (3) If indicated by the Government during performance, registration in an alternate system may be required in lieu of SAM. (c) If the Contractor does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. (1) A contractor may obtain a DUNS number? (i) Via the internet at http://fedgov.dnb.com/webform or if the contractor does not have internet access, it may call Dun and Bradstreet at 1-866-705-5711 if located within the United States; or (ii) If located outside the United States, by contacting the local Dun and Bradstreet office. The contractor should indicate that it is a contractor for a U.S. Government contract when contacting the local Dun and Bradstreet office. (2) The Contractor should be prepared to provide the following information: (i) Company legal business name. (ii) Tradestyle, doing business, or other name by which your entity is commonly recognized. (iii) Company physical street address, city, state and Zip Code. (iv) Company mailing address, city, state and Zip Code (if separate from physical). (v) Company telephone number. (vi) Date the company was started. (vii) Number of employees at your location. (viii) Chief executive officer/key manager. (ix) Line of business (industry). (x) Company Headquarters name and address (reporting relationship within your entity). (d) Reserved. (e) Processing time for registration in SAM, which normally takes five business days, should be taken into consideration when registering. Contractors who are not already registered should consider applying for registration at least two weeks prior to invoicing. (f) The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government?s reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Updating information in the SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document. (g)(1)(i) If a Contractor has legally changed its business name, ?doing business as? name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in Subpart 42.12, the Contractor shall provide the responsible Contracting Officer sufficient documentation to support the legally changed name with a minimum of one business day?s written notification of its intention to? (A) Change the name in the SAM database; (B) Comply with the requirements of subpart 42.12 of the FAR; and (C) Agree in writing to the timeline and procedures specified by the responsible Contracting Officer. (ii) If the Contractor fails to comply with the requirements of paragraph (g)(1)(i) of this clause, or fails to perform the agreement at paragraph (g)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the ?Suspension of Payment? paragraph of the electronic funds transfer (EFT) clause of this contract. (2) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims (see FAR Subpart 32.8, Assignment of Claims). Assignees shall be separately registered in the SAM database. Information provided to the Contractor?s SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the ?Suspension of payment? paragraph of the EFT clause of this contract. (h) Contractors may obtain information on registration and annual confirmation requirements via the SAM accessed through https://www.acquisition.gov or by calling 866-606-8220, or 334-206-7828 for international calls. (End of Clause) The following DFAR clauses in paragraph (b) of DFAR clause 252.212-7001, Contract Terms and Conditions Required To Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items, will apply: DFAR 252.232-7003, Electronic Submission of Payment Requests; and Alternate III of DFAR 252.247-7023. Delivery shall be made within 30 days or less after receipt of order (ARO). FOB Destination CONUS (CONtinental U.S.) Bid must be good for 30 calendar days after close of Buy and shipping must be free on board (FOB) destination CONUS (Continental U.S.) 561621 Security Systems Services (except Locksmiths). Company must have NAICS, 561621 on the System for Award Management (SAM) before an award could be made to them. If not, the company must updated their Vendor Entity Information do so by going to SAM web site at https://www.sam.gov/portal/public/SAM. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) directly to michael.e.rias.civ@mail.mil (NOT THROUGH FEDBID.COM) so that they are received at that email address no later than the closing date and time for this solicitation. The following provisions are applicable to this solicitation and can be viewed through Internet access at the FAR Site, http://farsite.hill.af.mil; 52.204-7 System for Award Management, 52.204-8 Annual Representations and Certifications, 52.204-9 Personal Identity Verification of Contractor Personnel, 52.212-1 Instructions to the Offerors ? Commercial Items; 52.212-3 Offeror Representations and Certifications ? Commercial Items; 52.212-4 Contract Terms and Conditions - Commercial Items; 52.223-6 Drug Free Workplace, 52.232-1 Payments, 52.233-3, Protest After Award, 52.233-4 Applicable Law for Breach of Contract Claim, 52.237-3 Continuity Of Services, 52.222-50, Combating Trafficking in Persons, 52.252-1 Solicitation Provisions Incorporated by Reference http://farsite.hill.af.mil; 252.203-7002 Requirement to Inform Employees of Whistleblower Rights, 252.204-7003 Control Of Government Personnel Work Product, 252.204-7004 Alt A Central Contractor Registration Alternate A, 252.211-7003 Item Identification and Valuation, 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items, 252.212-7001 (Dev) Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items (Deviation) 252.232-7003 - Electronic Submission of Payment Requests and Receiving Reports, 252.232-7010 - Levies on Contract Payments, 252.225- 7001 - Buy American Act and Balance of Payments Program, 252.203-7000 - Requirements Relating to Compensation of Former DoD Officials DFARS: DFARS 252.203- 7998 (Dev), Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements-Representation (Deviation 2015-O0010)DFARS 252.203-7999 (Dev), Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements (Deviation 2015-O0010 and Alternate III of DFAR 252.247-7023. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items (Deviation 2013-O0019) (May 2015), will apply: 52.204-8, 52.204-13, 52.208-9, 52.209-6, 52.209-10, 52.219-6, 52.219-28, 52.222-3, 552.222-19, 52.222-21, 52.222- 26,52.223-18, 52.225-13, 52.232-33, 52.237-2, 52.246-1, 252.204-7012, 252.209-7993 (DEV). The full text of FAR and DFAR clauses may be accessed electronically at http://www.acqnet.gov/far and http://farsite.hill.af.mil/. (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: 1. Price 2. Technical capability of the items to meet the Government requirement. 3. Past performance (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hill.af.mil https://www.acquisition.gov/far/index.html (End of clause) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any DoD FAR Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of clause) 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) (a) Definitions. As used in this clause-- Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization. Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall-- (1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the ?Web Based Training? link on the WAWF home page at https://wawf.eb.mil/. (e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: (1) Document type. The Contractor shall use the following document type(s). Invoice and Receiving Report (COMBO) (Contracting Officer: Insert applicable document type(s). Note: If a ?Combo? document type is identified but not supportable by the Contractor's business systems, an ?Invoice? (stand-alone) and ?Receiving Report? (stand-alone) document type may be used instead.) (2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer. DoDAAC: W5876J (Contracting Officer: Insert inspection and acceptance locations or ?Not applicable?.) (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Routing Data Table* -------------------------------------------------------------------------------------------- Field Name in WAWF Data to be entered in WAWF -------------------------------------------------------------------------------------------- Pay Official DoDAAC 0490 Issue By DoDAAC W911SG Admin DoDAAC W911SG Inspect By DoDAAC W5876J Ship To Code W5876J Ship From Code ____ Mark For Code ____ Service Approver (DoDAAC) ____ Service Acceptor (DoDAAC) ____ Accept at Other DoDAAC ____ LPO DoDAAC ____ DCAA Auditor DoDAAC ____ Other DoDAAC(s) ____ -------------------------------------------------------------------------------------------- (*Contracting Officer: Insert applicable DoDAAC information or ?See schedule? if multiple ship to/acceptance locations apply, or ?Not applicable.?) (4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request. (5) WAWF email notifications. The Contractor shall enter the email address identified below in the ?Send Additional Email Notifications? field of WAWF once a document is submitted in the system. INSPECTOR: Ms. Janet R. Long. janet.r.long.civ@mail.mil ACCEPTOR: Ms. Janet R. Long. janet.r.long.civ@mail.mil RECEIVING OFFICE POC: Ms. Janet R. Long. janet.r.long.civ@mail.mil CONTRACT SPECIALIST: Michael Rias michael.e.rias.civ@mail.mil CONTRACTING OFFICER: Hester Stone hester.q.stone.civ@mail.mil (g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact. WAWF POC: Ms. Janet R. Long. janet.r.long.civ@mail.mil (2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988. (End of clause) If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. (End of Clause) ALL Questions MUST be submitted by Friday, 18 September 2015 at 4:00 PM E.S.T. Questions received after Friday, 18 September 2015 at 4:00 PM E.S.T will NOT be answered. See attachment for response to vendor's question.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/d8b72d222583e21e116718c2d1ce0522)
Place of Performance: Address: , null null; Zip Code: null
Record: SN03909471-W 20151002/150930235434-d8b72d222583e21e116718c2d1ce0522 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

R -- INTRUSION DETECTION