SOURCES SOUGHT
66 -- Yb:YAG Amplifier System
- Notice Date
- 10/8/2015
- Notice Type
- Sources Sought
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of Energy, SLAC National Accelerator Lab, SLAC National Accelerator Lab, 2575 Sand Hill Road, Menlo Park, California, 94303, United States
- ZIP Code
- 94303
- Solicitation Number
- SLAC_100815-YAG(LL)
- Archive Date
- 10/24/2015
- Point of Contact
- Lorenza S. Ladao, Phone: 6509263214
- E-Mail Address
-
lladao@SLAC.stanford.edu
(lladao@SLAC.stanford.edu)
- Small Business Set-Aside
- N/A
- Description
- SLAC seeks vendors that can provide 1 Each of Yb: YAG Amplifier with the following minimum Specifications: a) The parameters of the high power Yb:YAG amplifier are specified below. • Pulse repetition rate frequency 0.1-1 MHz variable (nominal 0.1 MHz) • Average optical output power (400 W pre-amplifier) and >1.5 kW • Pulse duration ≈1-2 ps • Pulse energy >15 mJ at 0.1 MHz or >1.5 mJ at 1 MHz • Pulse energy stability <1% over 24 hours • Center wavelength out of laser amplifier 1030±1 nm • Spectral bandwidth with no ripples, no pedestals • Time-bandwidth product <0.5 (1 ps correspond to about 1.8 nm at FWHM) • Collimated free space output, M2 <1.3 • Polarization extinction ratio >30 dB, fixed in direction • Ellipticity >0.85 • Pulses have no pedestals, no background, satellite pulses (third order) <20% • No ASE background • Diode lifetime >1 year at 24/7 operation. b) The high power Yb:YAG amplifier is seeded with a 6 W beam from a 1030 nm fiber amplifier system. c) A 6 W uncompressed beam from the fiber amplifier system is further stretched to match the dispersion of the high power Yb:YAG amplifier compressor. d) The high power Yb:YAG amplifier includes diagnostics (CCD cameras) for optical alignment of the amplifier stages; additional motorized mirrors to remotely align the amplifier stages; a motorized re-collimation telescope for the amplified beam; a spatial filter unit to ensure M2 <1.3 at the output (if necessary, optional). e) Customer support required with a response time of <24 h. If this is not the case: proper training of SLAC personnel is required and additional critical spare parts at SLAC. f) On-site installation of laser amplifier. THIS IS NOT A REQUEST FOR QUOTE. VENDORS INTERESTED IN BEING CONSIDERED AS A POTENTIAL SOURCE SHOULD IDENTIFY THEMSELVES AS AN "INTERESTED PARTY" VIA THE FBO PORTAL. DO NOT CONTACT THE SUBCONTRACT ADMINISTRATOR.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/SLAC/STAN/SLAC_100815-YAG(LL)/listing.html)
- Place of Performance
- Address: SLAC National Accelerator Laboratory, Menlo Park, California, 94025, United States
- Zip Code: 94025
- Zip Code: 94025
- Record
- SN03918257-W 20151010/151008234922-67976ca0108b7fde20cb4d7650cdaa13 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |