SOURCES SOUGHT
38 -- RETENTION SYSTEM FOR BUILDING DEEP EXCAVATION
- Notice Date
- 10/30/2015
- Notice Type
- Sources Sought
- NAICS
- 238910
— Site Preparation Contractors
- Contracting Office
- Department of Energy, Bechtel National, Inc. (DOE Contractor), Bechtel National Inc., 2435 Stevens Center Place, Richland, Washington, 99352
- ZIP Code
- 99352
- Solicitation Number
- 24590-CM-SRA-CE01-00001
- Archive Date
- 11/25/2015
- Point of Contact
- Lisa Carlin, Phone: 509-373-8068, Tess Klatt, Phone: 5093712306
- E-Mail Address
-
lmcarlin@bechtel.com, taklatt@bechtel.com
(lmcarlin@bechtel.com, taklatt@bechtel.com)
- Small Business Set-Aside
- N/A
- Description
- SCHEDULE Issue Request for Proposal: November 16, 2015 Award and Notice to Proceed: January 16, 2016 Start Work: January 16, 2016 All Work Complete: July 16, 2016 PROJECT DESCRIPTION AND LOCATION The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is a complex of radioactive waste treatment processing facilities designed and constructed by Bechtel National, Inc. for the Department of Energy (DOE). The facility will process the Hanford Site tank waste and convert the waste into a stable glass form. The Project site is located in the 200 East Area of the Hanford Reservation near Richland, Washington, along the Columbia River. The site elevation varies from 662 to 684 feet above mean sea level. Ambient temperature range is -23 degrees F minimum to 113 degrees F maximum, with relative humidity of 5% minimum to 100% maximum. The project design life is 40 years. SCOPE OF WORK The WTP Effluent Management Facility (EMF) incorporates a subgrade low point drain tank (LPDT), housed in the below grade section of the Law Effluent Drain Tank (LEDT) Building. LEDT Building is connected to the Law Effluent Process Building via a pipe chase. To avoid sloping when excavating down to about -45' elevation, an Earth Retention System will be installed to holdback soil as the drain tank building area is excavated and to provide a stay-in-place concrete formwork for the drain tank building base mat and walls. The Subcontractor's responsibilities will consist of the following items: 1. Design, furnish, and install the Earth Retention System (Soldier Pile System or other appropriate system that is approved by Bechtel) for deep excavation. All design work shall be stamped by a Registered Professional Engineer current in the State of Washington. 2. Excavate internal area of the earth retention system (Approx. 45' x 45' x 45' deep). 3. Compact and install leveling mudmat at bottom of excavation. Install lagging (rebar and shotcrete facing or other appropriate system) to create the stay-in-place formwork for the permanent concrete base mat and walls of the LEDT Building. QUALITY ASSURANCE (QA) REQUIREMENTS Quality Assurance requirements for this scope will be commercial (CM) based the requirements in DOE Order 414.1C). Bechtel may require, as an element of bidder pre-qualification, submission of a representative sample QA Program or Table of Contents copy. CODES • International Code Council (ICC), Uniform Building Code (UBC) • International Code Council (ICC), International Building Code (IBC) • National Fire Protection Association (NFPA) 101, Life Safety Code • NFPA 30, Flammable and Combustible Liquids Code • NFPA 70, National Electrical Code • US Department of Energy (DOE) Orders STANDARDS • American National Standards Institute (ANSI) • American Society for Testing and Materials (ASTM) BIDDER REGISTRATION AND PRE-QUALIFICATION The BNI Acquisition Services Subcontracts group, is responsible for collection, evaluation, and internal publication of potential bidders' information for the purpose of pre-qualifying them to bid on any particular subcontract. As part of this process, BNI requires all potential offerors to register at the Supplier and Contractor Portal at: https://supplier.bechtel.com. All bidders must register with Bechtel National, Inc. for Work on the WTP Project. If your company has registered previously, then only supplemental information should be sent to the Bechtel National, Inc. representative noted below. Information to be provided by potential bidders must include: • Dun and Bradstreet Number • Company Name • Company Address • Contact Phone Number • Contact Person • E-mail Address • Safety Data and Information • Applicable work experience and Projects WTP BACKGROUND Information about the WTP Project can be found on http://www.hanfordvitplant.com. CONTACT Bechtel National, Inc. 2435 Stevens Center Place Richland, WA 99354 Attn: Lisa Carlin Tel. No. 509-373-8068 <img style="position: static !important; margin: 0px; width: 16px; bottom: 0px; display: inline; white-space: nowrap; float: none; height: 16px; vertical-align: middle; overflow: hidden; cursor: hand; right: 0px; top: 0px; left: 0px;" title="Call: 509-373-8068" src="data:image/png;base64,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" alt="" /> Email address: lmcarlin@bechtel.com Mailstop: MS10-A
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/BNI/BNI/24590-CM-SRA-CE01-00001/listing.html)
- Place of Performance
- Address: Richland, Washington, 99354, United States
- Zip Code: 99354
- Zip Code: 99354
- Record
- SN03934500-W 20151101/151030234152-dc033abf9ea2b426baf81eef005cc51f (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |