Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF NOVEMBER 04, 2015 FBO #5094
SOURCES SOUGHT

66 -- Mirror Vacuum Chambers & High Precision Mover Systems (VCMS) for LCLS

Notice Date

11/2/2015
 

Notice Type

Sources Sought
 

NAICS

334516 — Analytical Laboratory Instrument Manufacturing
 

Contracting Office

Department of Energy, SLAC National Accelerator Lab, SLAC National Accelerator Lab, 2575 Sand Hill Road, Menlo Park, California, 94303, United States
 

ZIP Code

94303
 

Solicitation Number

SLAC_110115(LL)-VCMS
 

Archive Date

11/14/2015
 

Point of Contact

Lorenza S. Ladao,
 

E-Mail Address

lladao@SLAC.stanford.edu
(lladao@SLAC.stanford.edu)
 

Small Business Set-Aside

N/A
 

Description

SLAC seeks vendors that can provide the following: Five (5) Mirror vacuum chambers and high precision mover systems (VCMS) for LCLS SLAC/LCLS is seeking for a supplier of five mechanical systems as part of the Hard X-ray Mirror upgrade project. Each system is composed by two main parts: The mirror assembly (with mirror holder, bender, and interface plate) designed and realized by SLAC and not part of this requisition. The vacuum chamber and mover system (including all the motions, motors, encoders and supports) to be designed and provided by the supplier. The VCMS has to be UHV compatible, hosting a 1 m long mirror (plus his holder, cooling and bender), and provide pointing stability better than 25 nrad rms. The Vendor is responsible for providing complete, tested systems and mechanics, delivered safely to SLAC, and to participate in the installation of the systems in their final locations. The Vendor is responsible for performing all necessary tests, to guarantee that all specifications and requirements are met. The Vendor is responsible for providing all necessary documentation to the SLAC team, to enable future connection, installation, and operation of the VCMS, and to maintain them at their specified performance. The five systems will be identical, except for the deflection direction. In fact, all the mirrors deflect sideway, three in one direction and two in the other. All the motions have to be performed by moving the entire chamber. Angular motion as large as 7 mrad with 50 nrad steps and transversal motion as large as 20 mm with 0.01 mm step are required. The cooling and bending system is designed by SLAC. SLAC will provide the exact location (with respect the mirror optical pole) and dimension of the flanges needed to accommodate them. SLAC will also provide a detailed drawing of the interface plate and all the drawings the vendor will need to properly accommodate the mirror assembly into the vacuum chamber. THIS IS NOT A REQUEST FOR QUOTE. VENDORS INTERESTED IN BEING CONSIDERED AS A POTENTIAL SOURCE SHOULD IDENTIFY THEMSELVES AS AN "INTERESTED PARTY" VIA THE FBO PORTAL. DO NOT CONTACT THE SUBCONTRACT ADMINISTRATOR.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/SLAC/STAN/SLAC_110115(LL)-VCMS/listing.html)
 

Place of Performance

Address: SLAC National Accelerator Laboratory, Menlo Park, California, 94025, United States

Zip Code: 94025
 

Record

SN03935538-W 20151104/151102234133-71e70d6ff552f36ea07680ee31970135 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |