MODIFICATION
99 -- BMC Software/ Maintenance
- Notice Date
- 11/12/2015
- Notice Type
- Modification/Amendment
- Contracting Office
- 935 Pennsylvania Avenue, NW, Washington, DC 20535
- ZIP Code
- 20535
- Solicitation Number
- 11122015
- Response Due
- 11/16/2015
- Archive Date
- 5/14/2016
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- N/A
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 11122015 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-84. The associated North American Industrial Classification System (NAICS) code for this procurement is 452111 with a small business size standard of $32.50M.This requirement is unrestricted and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2015-11-16 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Washington, DC 20535 The Federal Bureau of Investigation requires the following items, Brand Name or Equal, to the following: LI 001: Please see the attached Bill of Materials 1.The Government seeks to procure software renewals that are brandname or equal to each of the BMC products listed in the attached bill of materials. 2.See attached bill of materials for product descriptions and quantities. 3.*Please Note: Prior to award, a Company Threat Assessment (CTA) will be conducted by the FBI. Therein, it is requested that all interested vendors complete the attached Acquisition Risk Questionnaire and Key Management Personnel Listing in order to submit to the contracting officer for consideration.* 4.A VPAT/GPAT is requested for submission alongside a quotation. Responses to this solicitation will only be considered for award after it has been determined that the proposal adequately addresses the requirements for Section 508. Only proposals which contain adequate information to document their responsiveness to the Section 508 requirements (e.g. a completed GPAT, VPAT or equivalent and supporting documentation) will be eligible for any additional merit consideration. 5. All quotes will be evaluated on the basis of lowest price technically acceptable. The following evaluation factors will be used: technical acceptability, past performance, and 508 compliance. *TECHNICAL ACCEPTIBILITY* All quotes will be evaluated to determine whether they comply with the attached product description/quantities spreadsheet. *PAST PERFORMANCE* The government will evaluate past performance through consideration of all available Government sources. Past performance will be evaluated on a pass/fail basis. PASS: Contractor has a record of consistently providing quality, on-time products and services that conform to contractual requirements. FAIL: Contractor does not have a record of consistently providing quality, on-time products and services that conform to contractual requirements. A lack of available past performance information will not be held against the contractor. In the event no past performance information is available, the offeror will be given a Passing score for this evaluation factor. *508 COMPLIANCE* The government will evaluate Section 508 compliance through review of the offerors responses provided in the attached GPAT. Section 508 compliance will be evaluated on a pass/fail basis. PASS: The processes or products described in the GPAT provided by the offeror are sufficient to comply with all applicable Section 508 requirements. FAIL: The processes or products described in the GPAT provided by the offeror are not sufficient to comply with all applicable Section 508 requirements., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Federal Bureau of Investigation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Federal Bureau of Investigation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. No partial shipments are permitted unless specifically authorized at the time of award. Delivery must be made within 30 days or less after receipt of order (ARO). The offer must provide within its offer the number of days - not to exceed 30 - required to make delivery after it receives a purchase order from the buyer. Sellers understand that FedBid ranks all Bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified in the Buy Terms, below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. In addition to providing pricing at www.FedBid.com for this solicitation, each Offer must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. BRAND NAME OR EQUAL FAR 52.211-6 Aug. 1999 (a) If an item in this solicitation is identified as "brand name or equal", the purchase description reflects the characteristics and level of quality that will satisfy the Government?s needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation. (b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must: (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by? (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an ?equal? product, the offeror shall provide the brand name product referenced in the solicitation. NO SUBSTITUTIONS, EXACT MATCH ONLY. The vendor may not substitute any item/service listed on this order without prior written approval from the Contracting Officer. No other individual is authorized, either verbally or in writing to change part numbers, manufacturer, quantity, delivery dates, or any other specifications of this IFB. Items/services that do not conform to descriptions and part numbers found in this IFB will be rejected at the time of delivery causing a return at the vendor's expense.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOJ/FBI/FedBid/11122015/listing.html)
- Place of Performance
- Address: Washington, DC 20535
- Zip Code: 20535
- Zip Code: 20535
- Record
- SN03944231-W 20151114/151112234147-bd06ff4143f14d113017e06bb64e8561 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |