Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF DECEMBER 30, 2015 FBO #5150
SOLICITATION NOTICE

61 -- Low-Voltage Cabling - SF-18

Notice Date

12/28/2015
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

238210 — Electrical Contractors and Other Wiring Installation Contractors
 

Contracting Office

Department of Commerce, National Oceanic and Atmospheric Administration (NOAA), Western Acquisition Division-Boulder, 325 Broadway - MC3, Boulder, Colorado, 80305-3328, United States
 

ZIP Code

80305-3328
 

Solicitation Number

NMAN72001600456DLZ
 

Archive Date

1/22/2016
 

Point of Contact

Donald L. Schartz, Phone: 3034977363
 

E-Mail Address

donald.l.schartz@noaa.gov
(donald.l.schartz@noaa.gov)
 

Small Business Set-Aside

Total Small Business
 

Description

SF-18 to Bid On. Work to Be Done in San Diego For Installation, Termination, Testing and Certification of Low-Voltage Cable. (I) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice and in accordance with the simplified acquisition procedures authorized in FAR Part 13. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (II) This solicitation is issued as a request for quotation (RFQ). Submit written quotes on RFQ Number NMAN72001600456DLZ. (III) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-85. (IV) This solicitation is being issued as a Total Small Business Set-aside. The associated NAICS code is 238210, The size standard is $15.0 million. (V) This combined solicitation/synopsis is for purchase of the following commercial supply of the installation, termination, testing and certification of low-voltage cabling from the AT&T MPOE demark services pedestal to the pier. (VI) Description of requirements is as follows: This is for the installation, termination, testing and certification of low-voltage cabling. See attached Specifications starting on page 16 of this posting which applies to the type of installation needed (VII) Period of performance shall be date of award for the following dates. Performance Period: Date of award through January 31, 2016. (VIII) FAR 52.212-1, Instructions to Offerors -- Commercial Items (Oct 2015), applies to this acquisition. NOTICE TO OFFERORS: Instructions for submitting quotations under this request for quote must be followed. Failure to provide all information to aid in the evaluation may be considered non-responsive. Offers that are non-responsive may be excluded from further evaluation and rejected without further notification to the offeror. 1. Quotes shall be fully executed and returned on the Standard Form (SF) 18 and any acknowledgements of solicitation amendments on the SF 30. 2. Submit quotations to the office specified in this solicitation at or before the time specified in the solicitation. Email quotes are acceptable and can be sent to Donald.L.Schartz@noaa.gov or Faxed to 303-497-3163. 3. At a minimum the contractor shall provide the following information: a) Point of contact name, telephone and E-mail address. b) DUNS Number 4. Provide all evaluation criteria in accordance with 52.212-2 in this package. 1352.215-72 Inquiries (Apr 2010) Offerors must submit all questions concerning this solicitation in writing to Donald.L.Schartz@noaa.gov. Questions should be received no later than 1:00 P.M. MST, December 31, 2015. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract. (End of clause) (IX) FAR 52.212-2, Evaluation -Commercial Items (Oct 2014), applies to this acquisition. Offers will be evaluated based on price and the factors set forth in paragraph (a), and award will be made to the firm offering the best value to the Government. Paragraph (a) is hereby completed as follows: Evaluation will be based on 1) Technically Acceptable Per Specifications and statement of work. 2) Price. The Government intends to award a firm-fixed price purchase order on an all or none basis with payment terms of Net 30. A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. This will be and All or None award. 1) Capability to meet the requirements of the Statement of Work and Specifications. • Vendor must be able to support this type of installation, termination, testing and certification. • Capability to provide the installation, termination, testing and certification.. • Equipment Certifications - if applicable • Licenses to Operate - if applicable 2) Price. (X) FAR 52.212-3 Offeror Representations and Certifications - Commercial Items (Mar 2015) The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) website accessed through http://www.acquisition.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (p) of this provision. (a) Definitions. As used in this provision- "Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. "Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner. "Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees. "Inverted domestic corporation", means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). "Manufactured end product" means any end product in Federal Supply Classes (FSC) 1000-9999, except- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. "Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. "Sensitive technology"- (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically- (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). "Service-disabled veteran-owned small business concern"- (1) Means a small business concern- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. "Small disadvantaged business concern", consistent with 13 CFR 124.1002, means a small business concern under the size standard applicable to the acquisition, that- (1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by- (i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and (ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and (2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition. "Subsidiary" means an entity in which more than 50 percent of the entity is owned- (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. "Veteran-owned small business concern" means a small business concern- (1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern- (1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. "Women-owned small business (WOSB) concern eligible under the WOSB Program" (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAM website. (2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through http://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________. [Offeror to identify the applicable paragraphs at (c) through (p) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.] (c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it o is, o is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it o is, o is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it o is, o is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, that it o is, o is not a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it o is, o is not a women-owned small business concern. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that- (i) It o is,o is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It o is, o is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: __________.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that- (i) It o is, o is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It o is, o is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: __________.] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it o is a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________________________________ (10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that- (i) It o is, o is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR Part 126; and (ii) It o is, o is not a HUBZone joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: __________.] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation. (d) Representations required to implement provisions of Executive Order 11246- (1) Previous contracts and compliance. The offeror represents that- (i) It o has, o has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and (ii) It o has, o has not filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that- (i) It o has developed and has on file, o has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 cfr parts 60-1 and 60-2), or (ii) It o has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American-Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." The terms "commercially available off-the-shelf (COTS) item" "component," "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies." (2) Foreign End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g)(1) Buy American-Free Trade Agreements-Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product," "commercially available off-the-shelf (COTS) item," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of "domestic end product." Other Foreign End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No. _______________________________________ _______________________________________ _______________________________________ [List as necessary] (3) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Canadian or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (4) Buy American-Free Trade Agreements-Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled "Buy American-Free Trade Agreements-Israeli Trade Act": Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements." (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American statute. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals- (1) o Are, o are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) o Have, o have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; (3) o Are, o are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and (4) o Have, o have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied. (i) Taxes are considered delinquent if both of the following criteria apply: (A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code). (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).] (1) Listed end products. Listed End Product Listed Countries of Origin ___________________ ___________________ ___________________ ___________________ (2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.] [ ] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. [ ] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) o In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) o Outside the United States. (k) Certificates regarding exemptions from the application of the Service Contract Labor Standards(Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.] [ ] (1) Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror o does o does not certify that- (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations; (ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. [ ] (2) Certain services as described in FAR 22.1003-4(d)(1). The offeror o does o does not certify that- (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations; (ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies- (i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Labor Standards wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause. (l) Taxpayer Identification Number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to the SAM database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN. (3) Taxpayer Identification Number (TIN). o TIN: ________________________________. o TIN has been applied for. o TIN is not required because: o Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States; o Offeror is an agency or instrumentality of a foreign government; o Offeror is an agency or instrumentality of the Federal Government. (4) Type of organization. o Sole proprietorship; o Partnership; o Corporate entity (not tax-exempt); o Corporate entity (tax-exempt); o Government entity (Federal, State, or local); o Foreign government; o International organization per 26 CFR 1.6049-4; o Other ________________________________. (5) Common parent. o Offeror is not owned or controlled by a common parent; o Name and TIN of common parent: Name ________________________________. TIN _________________________________. (m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan. (n) Prohibition on Contracting with Inverted Domestic Corporations. (1) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4. (2) Representation. By submission of its offer, the offeror represents that- (i) It is not an inverted domestic corporation; and (ii) It is not a subsidiary of an inverted domestic corporation. (o) Prohibition on contracting with entities engaging in certain activities or transactions relating to Iran. (1) The offeror shall e-mail questions concerning sensitive technology to the Department of State at CISADA106@state.gov. (2) Representation and Certifications. Unless a waiver is granted or an exception applies as provided in paragraph (o)(3) of this provision, by submission of its offer, the offeror- (i) Represents, to the best of its knowledge and belief, that the offeror does not export any sensitive technology to the government of Iran or any entities or individuals owned or controlled by, or acting on behalf or at the direction of, the government of Iran; (ii) Certifies that the offeror, or any person owned or controlled by the offeror, does not engage in any activities for which sanctions may be imposed under section 5 of the Iran Sanctions Act; and (iii) Certifies that the offeror, and any person owned or controlled by the offeror, does not knowingly engage in any transaction that exceeds $3,000 with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked pursuant to the International Emergency Economic Powers Act (50 U.S.C. 1701 et seq.) (see OFAC's Specially Designated Nationals and Blocked Persons List at http://www.treasury.gov/ofac/downloads/t11sdn.pdf). (3) The representation and certification requirements of paragraph (o)(2) of this provision do not apply if- (i) This solicitation includes a trade agreements certification (e.g., 52.212-3(g) or a comparable agency provision); and (ii) The offeror has certified that all the offered products to be supplied are designated country end products. (p) Ownership or Control of Offeror. (Applies in all solicitations when there is a requirement to be registered in SAM or a requirement to have a DUNS Number in the solicitation. (1) The Offeror represents that it o has or o does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (2) and if applicable, paragraph (3) of this provision for each participant in the joint venture. (2) If the Offeror indicates "has" in paragraph (p)(1) of this provision, enter the following information: Immediate owner CAGE code: ____________________. Immediate owner legal name: _____________________. (Do not use a "doing business as" name) Is the immediate owner owned or controlled by another entity: o Yes or o No. (3) If the Offeror indicates "yes" in paragraph (p)(2) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information: Highest-level owner CAGE code: __________________. Highest-level owner legal name: ___________________. (Do not use a "doing business as" name) (End of provision) Alternate I (Oct 2014). As prescribed in 12.301(b)(2), add the following paragraph (c)(11) to the basic provision: (11) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) of this provision.) ____ Black American. ____ Hispanic American. ____ Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians). ____ Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, Republic of Palau, Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru). ____ Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal). ____ Individual/concern, other than one of the preceding. The offeror shall complete the annual representations and certifications electronically in System for Award Management at https://www.sam.gov/portal/public/SAM/. (XI) The clause at FAR 52.212-4, Contract Terms and Conditions - Commercial Items (May 2015) applies to this acquisition. (XII) The clause at FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (Dec 2015) applies to this acquisition. The following clauses under subparagraph (b) apply: (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note). (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note). (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2011) (15 U.S.C. 644). (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011)(15 U.S.C. 644(r)). (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)). (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755). (26) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Jan 2014) (E.O. 13126). (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015) (28) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246). (31) 52.222-37, Employment Reports on Veterans (OCT 2015) (38 U.S.C. 4212). (44) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). (50) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Jul 2013) (31 U.S.C. 3332). 52.203-98 - Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements -Representations (DEVIATION 2015-02) (FEB 2015) 52.203-99 - Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements (DEVIATION 2015-02) (FEB 2015). (XIII) The following clauses are also applicable to this acquisition: 52.252-1 Solicitation Provisions Incorporated by Reference (Feb 1998) 52.252.2 Clauses Incorporated By Reference (Feb 1998), This contract incorporates on or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this address: https://www.acquisition.gov/far/index.html (End of Clause) 52.203-98 - Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements -Representations (DEVIATION 2015-02) (FEB 2015) 52.203-99 - Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements (DEVIATION 2015-02) (FEB 2015). The following additional FAR terms and conditions apply: 52.204-7, System for Award Management (Jul 2013) 52.204-13, System for Award Management Maintenance (Jul 2013) 52.214-34, Submission of Offers in the English Language (Apr 1991) 52.214-35, Submission of Offer in U.S. Currency (Apr 1991) 52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS (APR 1984) (a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the provision. (b) The use in this solicitation of any Commerce Acquisition Regulation provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of provision) 52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of Commerce Acquisition Regulation clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of clause) Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction Under Any Federal Law (Class Deviation) (March 2014) (1) In accordance with Sections 536 and 537 of Division B of Public Law 113-76 Consolidated Appropriations Act, 2014, none of the funds made available by Consolidated Appropriations Act, 2014 funding may be used to enter into a contract with any corporation that- (a) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless the agency has considered suspension or debarment of the corporation and has made a determination that this further action is not necessary to protect the interests of the Government, or (b) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless the agency has considered suspension or debarment of the corporation and made a determination that this further action is not necessary to protect the interests of the Government. (2) The Offerer represents that, as of the date of this offer - (a) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months. (b) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability. (End of provision) 52.232-40 PROVIDING ACCELERATED PAYMENT TO SMALL BUSINESS SUBCONTRACTORS (Dec 2013) (a) Upon receipt of accelerated payments from the Government, the contractor is required to make accelerated payments to small business subcontractors to the maximum extent practicable after receipt of a proper invoice and all proper documentation from the small business subcontractor. (b) Include the substance of this clause, including paragraph (b), in all subcontracts with small business concerns. (c) The acceleration of payments under this clause does not provide any new rights under the Prompt Payment Act. (End of clause) DEPARTMENT OF COMMERCE CLAUSES: FOR FULL TEXT OF A COMMERCE ACQUISITION CLAUSE OR PROVISION YOU MAY GO TO THE FOLLOWING WEBSITE, http://www.osec.doc.gov/oam/acquistion_management/policy/default.htm 1352.201-70, CONTRACTING OFFICER'S AUTHORITY (APRIL 2010) The Contracting Officer is the only person authorized to make or approve any changes in any of the requirements of this contract, and, notwithstanding any provisions contained elsewhere in this contract, the said authority remains solely in the Contracting Officer. In the event the contractor makes any changes at the direction of any person other than the Contracting Officer, the change will be considered to have been made without authority and no adjustment will be made in the contract terms and conditions, including price. (End of clause) 1352.209-73, COMPLIANCE WITH THE LAWS (APRIL 2010) The contractor shall comply with all applicable laws, rules and regulations which deal with or relate to performance in accord with the terms of the contract. (End of clause) 1352.209-74, ORGANIZATIONAL CONFLICT OF INTEREST (APRIL 2010) (a) Purpose. The purpose of this clause is to ensure that the contractor and its subcontractors: (1) Are not biased because of their financial, contractual, organizational, or other interests which relate to the work under this contract, and (2) Do not obtain any unfair competitive advantage over other parties by virtue of their performance of this contract. (b) Scope. The restrictions described herein shall apply to performance or participation by the contractor, its parents, affiliates, divisions and subsidiaries, and successors in interest (hereinafter collectively referred to as "contractor") in the activities covered by this clause as a prime contractor, subcontractor, co-sponsor, joint venturer, consultant, or in any similar capacity. For the purpose of this clause, affiliation occurs when a business concern is controlled by or has the power to control another or when a third party has the power to control both. (c) Warrant and Disclosure. The warrant and disclosure requirements of this paragraph apply with full force to both the contractor and all subcontractors. The contractor warrants that, to the best of the contractor's knowledge and belief, there are no relevant facts or circumstances which would give rise to an organizational conflict of interest, as defined in FAR Subpart 9.5, and that the contractor has disclosed all relevant information regarding any actual or potential conflict. The contractor agrees it shall make an immediate and full disclosure, in writing, to the Contracting Officer of any potential or actual organizational conflict of interest or the existence of any facts that may cause a reasonably prudent person to question the contractor's impartiality because of the appearance or existence of bias or an unfair competitive advantage. Such disclosure shall include a description of the actions the contractor has taken or proposes to take in order to avoid, neutralize, or mitigate any resulting conflict of interest. (d) Remedies. The Contracting Officer may terminate this contract for convenience, in whole or in part, if the Contracting Officer deems such termination necessary to avoid, neutralize or mitigate an actual or apparent organizational conflict of interest. If the contractor fails to disclose facts pertaining to the existence of a potential or actual organizational conflict of interest or misrepresents relevant information to the Contracting Officer, the Government may terminate the contract for default, suspend or debar the contractor from Government contracting, or pursue such other remedies as may be permitted by law or this contract. (e) Subcontracts. The contractor shall include a clause substantially similar to this clause, including paragraphs (f) and (g), in any subcontract or consultant agreement at any tier expected to exceed the simplified acquisition threshold. The terms "contract," "contractor," and "Contracting Officer" shall be appropriately modified to preserve the Government's rights. (f) Prime Contractor Responsibilities. The contractor shall obtain from its subcontractors or consultants the disclosure required in FAR Part 9.507-1, and shall determine in writing whether the interests disclosed present an actual, or significant potential for, an organizational conflict of interest. The contractor shall identify and avoid, neutralize, or mitigate any subcontractor organizational conflict prior to award of the contract to the satisfaction of the Contracting Officer. If the subcontractor's organizational conflict cannot be avoided, neutralized, or mitigated, the contractor must obtain the written approval of the Contracting Officer prior to entering into the subcontract. If the contractor becomes aware of a subcontractor's potential or actual organizational conflict of interest after contract award, the contractor agrees that the Contractor may be required to eliminate the subcontractor from its team, at the contractor's own risk. (g) Waiver. The parties recognize that this clause has potential effects which will survive the performance of this contract and that it is impossible to foresee each circumstance to which it might be applied in the future. Accordingly, the contractor may at any time seek a waiver from the Head of the Contracting Activity by submitting such waiver request to the Contracting Officer, including a full written description of the requested waiver and the reasons in support thereof. (End of clause) 1352.233-70, AGENCY PROTESTS (APRIL 2010) (a) An agency protest may be filed with either: (1) the contracting officer, or (2) at a level above the contracting officer, with the appropriate agency Protest Decision Authority. See 64 Fed. Reg. 16,651 (April 6, 1999) (b) Agency protests filed with the Contracting Officer shall be sent to the following address: Clifford C. Edwards Contracting Officer NOAA/AGO Western Acquisition Division-Boulder 325 Broadway SOU6 Boulder, CO 80305 FAX: 303-497-3163 (d) Agency protests filed with the agency Protest Decision Authority shall be sent to the following address: Barry Berkowitz Senior Procurement Executive and Director, Office of Acquisition Management U.S. Department of Commerce Room 6422 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington DC 20230 FAX: 202-482-1711 (d) A complete copy of all agency protests, including all attachments, shall be served upon the Contract Law Division of the Office of the General Counsel within one day of filing a protest with either the Contracting Officer or the Protest Decision Authority. (e) Service upon the Contract Law Division shall be made as follows: U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington, D.C. 20230. FAX: (202) 482-5858 (End of clause) 1352.233-71, GAO AND COURT OF FEDERAL CLAIMS PROTESTS (APRIL 2010) (a) A protest may be filed with either the Government Accountability Office (GAO) or the Court of Federal Claims unless an agency protest has been filed. (b) A complete copy of all GAO or Court of Federal Claims protests, including all attachments, shall be served upon (i) the Contracting Officer, and (ii) the Contract Law Division of the Office of the General Counsel, within one day of filing a protest with either GAO or the Court of Federal Claims. (c) Service upon the Contract Law Division shall be made as follows: U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, N.W. Washington, D.C. 20230. FAX: (202) 482-5858 (End of clause) (XIV) Defense Priorities and Allocations System (DPAS) and assigned rating does not apply. (XV) Quotes are required to be received in the contracting office no later than 11:00 A.M. Mountain Standard Time on January 7, 2016. All quotes must be faxed or emailed to the attention of Donald Schartz. The fax number is (303) 497-3163 and the email address is Donald.L.Schartz @noaa.gov. (XVI) Any questions regarding this solicitation should be directed to Donald Schartz through the email address: Donald.L.Schartz@noaa.gov or fax (303) 497-3163. THE GOVERNMENT DOES NOT ACCEPT RESPONSIBILITY FOR NON-RECEIPT OF QUOTES. IT IS THE CONTRACTOR'S RESPONSIBILITY TO REQUEST AND RECEIVE A CONFIRMATION OF THE QUOTE RECEIPT. PIER INTERCONNECT LOW-VOLTAGE CABLING PLANT INSTALLATION, TERMINATION, TESTING AND CERTIFICATION MARINE OPERATIONS - San Diego 1839 Water Street, San Diego, CA 92101 Tenth Ave Marine Terminal, Crosby Rd Gate I. SCOPE. A. Background. The National Oceanic and Atmospheric Administration (NOAA) is seeking an experienced Low-Voltage Cabling Systems Installation Expert for the installation, termination, testing and certification of all Low-Voltage Cabling from the AT&T MPOE demarc services pedestal to the pier-accessible NOAA ship berth utility station and the NOAA Port Office trailer. The site is located at the Tenth Avenue Marine Terminal in San Diego, California. The Low-Voltage Cabling would include, but is not limited to CAT5e/CAT6 copper LAN cable and shielded twisted-pair cable; Single-Mode Fiber Optic cabling with all necessary consolidation/termination equipment. B. Purpose. The purpose of this Statement of Work (SOW) is to define the installation, termination, testing and certification related services necessary to completely install and certify the low-voltage cabling from the AT&T MPOE demarc services pedestal to the NOAA Port Office trailer and from the NOAA Port Office trailer to the pier-accessible NOAA ship berth utility station. The site is located at the Tenth Avenue Marine Terminal in San Diego, California. C. Objective. Except as otherwise specified herein, the Contractor shall furnish all necessary personnel, materials, services, facilities, and otherwise do all activities necessary for and incidental to the completion of this SOW. These services include but are not limited to the following: reviewing the design/layout and the architectural drawings of the facility and conferring with NOAA representatives to ensure full understanding and scope of the low-voltage cabling; procuring all necessary types of cabling to support the facility low-voltage cabling; procuring all termination materials to support all types of terminations on each of the low-voltage cable runs; installing all low-voltage cabling in approved cableways/wireways/conduits; installing all termination boxes in Pier Risers and weather-proof enclosures on the piers and other locations as designated by NOAA representatives; terminating all low-voltage cabling as designated below; testing all low-voltage cable runs and documenting the condition/status of all tests on all low-voltage cable runs; and submission of all certification documentation and installation reports. D. Warranty. The contractor shall be Corning certified installer as applicable to all fiber optic cabling terminations and shall warrant the Low-Voltage cabling plant with a warranty for a period of not less than 20 years from date of acceptance. The contractor shall provide copies of all certification documentation to the owner. E. IT Security and IT Assessment and Authorization (A&A). Security Requirements for Information Technology Resources (Commerce Acquisition Regulations (CAR) 1352.239-73) (clause 73). The A&A Requirements of clause 73 do not apply, and a Security Accreditation Package is not required. II. CONTRACTOR TASKS A. Task #1. (Design Review) The Contractor will review the design/layout and architectural drawings with NOAA representatives and confirm all low-voltage cable runs from the AT&T MPOE demarc services pedestal to the pier-accessible NOAA ship berth utility station and the NOAA Port Office trailer. The contractor will be responsible for installing the Low-Voltage cabling and terminating/testing/certifying the individual cable runs per the architectural drawings. B. Task #2. (Procurement & Installation) The Contractor will procure all low-voltage cabling and termination accessories necessary to support the cabling as listed above and amended by review discussions concluded during Task #1. The Contractor will install all low-voltage cabling into approved cable runs, wireways and conduits per the design/layout and architectural drawings and as amended by review discussions concluded during Task #1. All Low-Voltage cabling shall be installed in the proper conduits/cable runs and shall be a single unbroken run from end to end and shall conform to the maximum bend/radius requirements stated by the manufacturer and applicable to the Corning certifications. The interconnect cabling from the NOAA Port Office trailer to the pier-accessible NOAA ship berth utility station will be comprised of Single-Mode Fiber Optic cabling with a minimum four (4) paired connections or eight (8) individual fiber strands. The approximate length of distance between these points is approximately 700 feet. The interconnect cabling from the AT&T MPOE demarc services pedestal to the NOAA Port Office trailer with three (3) CAT5e/CAT6 copper LAN shielded twisted-pair cable. The approximate length of distance between these points is approximately 60 feet. The Contractor is responsible for compliance with all Federal, State and Local codes that are applicable to electrical and telecommunications wiring and fire codes. If there is any conflict between these specifications and codes, the most stringent requirement shall apply. C. Task #3. (Termination & Testing) Note 1: All cabling shall be terminated according to TIA/EIA 568C Standards. Note 2: LC connectors shall be used for all Single Mode Fiber Optic cables and shall terminate into a mounted patch panel. Structured Cabling Standards: The following lists the primary Structured Cabling Standards used in the USA: 1) TIA-526-7 Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant - OFSTP-7 - (February 2002) 2) TIA-526-14-A Optical Power Loss Measurements of Installed Multimode Fiber Cable Plant - OFSTP-14 - (August 1998) 3) ANSI/TIA/EIA-568-C Commercial Building Telecommunications Cabling Standard, General Requirements, June 2009 4) ANSI/TIA/EIA-568-B.1 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements: General Requirements, May 2001. Adenda 1) ANSI/TIA/EIA-568-B.1-1-2001, Addendum 1, Minimum Curve Radius for 4 pair UTP and ScTP cable, July, 2001. 2) TIA/EIA-568-B.1-2 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 2 - Grounding and Bonding Requirements for Screened Balanced Twisted-Pair Horizontal Cabling - (February 2003) 3) TIA/EIA-568-B.1-3 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type - (February 2003) 4) TIA/EIA-568-B.1-4 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 4 - Recognition of Category 6 and 850 nm Laser Optimized 50/125 μm Multimode Optical Fiber Cabling - (February 2003) 5) TIA/EIA-568-B.1-5 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 5 - Telecommunications Cabling for Telecommunications Enclosures - (March 2004) 6) TIA/EIA-568-B.1-7 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 7 - Guidelines for Maintaining Polarity Using Array Connectors - (January 2006) 5) TIA/EIA-568-B.2 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components - (December 2003) Adenda 1) TIA/EIA-568-B.2-1 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components - Addendum 1 - Transmission Performance Specifications for 4-Pair 100 ohm Category 6 Cabling - (June 2002) 2) TIA/EIA-568-B.2-2 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components - Addendum 2 - Revision of Sub-clauses - (December 2001) 3) TIA/EIA-568-B.2-3 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components - Addendum 3 - Additional Considerations for Insertion Loss & Return Loss Pass/Fail Determination - (March 2002) 4) TIA/EIA-568-B.2-4 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components - Addendum 4 - Solderless Connection Reliability Requirements for Copper Connecting Hardware - (June 2002) 5) TIA/EIA-568-B.2-5 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components - Addendum 5 - Corrections to TIA/EIA-568-B.2 - (January 2003) 6) TIA/EIA-568-B.2-6 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components - Addendum 6 - Category 6 Related Component Test Procedures - (December 2003) 7) TIA/EIA-568-B.2-10 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components - Addendum 10 - Specification for Augmented Category 6 (CAT6A) Cabling - (February 2008) 8) TIA/EIA-568-B.2-11 Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components - Addendum 11 - Specification of 4-Pair UTP and SCTP Cabling - (December 2005) 6) TIA/EIA-568-3 Optical Fiber Cabling Components Standard - (April 2002) Adenda 1) TIA/EIA-568-3.1 Optical Fiber Cabling Components Standard - Addendum 1 - Additional Transmission Performance Specifications for 50/125 μm Optical Fiber Cables - (April 2002) 7) TIA-569-B Commercial Building Standard for Telecommunications Pathways and Spaces - (October 2004) 8) TIA-598-C Optical Fiber Cable Color Coding - (January 2005) 9) TIA/EIA-606-A Administration Standard for Commercial Telecommunications Infrastructure - (May 2002) 10) J-STD-607-A Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications - (October 2002) 11) TIA-758-A Customer-owned Outside Plant Telecommunications Infrastructure Standard - (August 2004) The Contractor will terminate all Fiber Optic cabling within the trailer in a rack-mounted fiber patch panel. The Contractor will terminate all Fiber Optic cabling at the ship's pier utility station with a Corning Single-Panel Housing (SPH) with a CCH Panel (LC Adapters, Duplex, 8F, Single-mode). Each Fiber Optic termination shall be labeled according to the following scheme: SOURCE "TO" DESTINATION The patch panel terminations shall be labeled using machine-printed labels. Lettering shall be block letters and numerals, applied by the same label maker for consistency. The Contractor will test the performance of the cabling configurations as defined in, and to the requirements of, TIA/EIA 568-B.2-1 for Telecommunications Cabling Systems. The Contractor shall test all Fiber Optic cabling with a light source and meter at both 1300 nm and 1550 nm per the specifications outlined in references 1) through 6) and applicable addenda listed above.. All fibers must test within the combined loss budget attributable to the cable length (1 dB/km at 1300 nm and 1dB/km at 1550 nm) plus the connectors (.25 dB per connector) and any splices (.25 dB per splice). In no case shall the loss budget for any single fiber optic run (connector to connector) be greater than 5 dB at 850 nm. A report of the cable plant test results shall be delivered to NOAA as described in SECTION III.F below. D. Task #4. (Certification) The contractor shall carry a Corning OWC certification and perform all fiber optic terminations and testing in accordance with Corning processes. The certification test equipment shall be a certified fiber optic tester with a laser-optimized light source and meter at both 1300nm and 1550nm per the specifications outlined in references 1) through 6). The contractor shall provide copies of all fiber optic run test results in the testing devices' native software indicating passing status on CD to the owner. The contractor shall provide copies of all certification documentation to the owner. III. REQUIRED DELIVERABLES AND OWNERSHIP OF MATERIALS A. Government Contact. The COR will serve as the Government's point of contact to review all submissions to verify adherence to this contract. B. Reviews. Unless otherwise specified in SECTION F Schedule of Deliverables, the Government will have a maximum of seven (7) calendar days to review all submittals. The schedule for all milestones is listed in SECTION F Schedule of Deliverables. Additionally, the Contractor shall participate in a review meeting with the Government reviewers at various times throughout the project. The intent of these review meetings is to ensure that issues are clearly understood by the project team and are subsequently resolved efficiently and effectively. Reviews by the Government are not to be interpreted as an approval of the Contractor's apparent progress toward meeting the contract requirements but are intended to discover any information which can be brought to the Contractor's attention which might prevent costly errors and omissions. The Contractor shall remain completely responsible for all deliverables in full compliance with the requirements of this contract. C. Units of Measure. The Contractor may take project site measurements in either English or Metric (IS) units, but all deliverable documents shall utilize English units. D. Deliverables. The Contractor shall submit the number of deliverables as specified in SECTION F, Schedule of Deliverables. In addition, the Contractor shall also submit one electronic copy of all written documentation in accordance with Section V Computer Compatibility Requirements, of this Statement of Work. All written documentation shall use standard white bond or formatted sheets 8½ x 11 inch, bound, and organized in a logical sequence, tabbed to each section heading. Calculations shall be titled with each analysis clearly indicating the subject/problem being studied, applied references, assumptions, and analysis of answer. E. Drawings. If any of the required reports contain drawings, then the Contractor shall submit one electronic copy of all the drawings in accordance with Section V Computer Compatibility Requirements, of this SOW. F. Deliverable Titles/Labels. The deliverables shall be labeled using one of the following titles: Low-Voltage Structured Cabling System Schematic Layout Marine Operations - San Diego Low-Voltage Structured Cabling System Category 6/6A LAN Cabling Report of Test Results Marine Operations - San Diego Low-Voltage Structured Cabling System Fiber Optic Cabling Report of Test Results Marine Operations - San Diego IV. GOVERNMENT PROVIDED MATERIALS AND/OR SERVICES A. PROVISIONS. As a means to reduce costs to the project, the Government is providing the following items: None B. EXCLUSIONS. Except as indicated elsewhere in this SOW, the Government will provide no data, materials, equipment and/or services to the Contractor. Any and all research required to fulfill the SOW described herein, shall be the responsibility of the Contractor. The Government retains the right to request the Contractor to acquire additional information on behalf of the Government. C. WARRANTY. The Government does not warrant that any documents provided as attachments to be free from discrepancies, ambiguities, errors, omissions, or changing conditions. It is the responsibility of the Contractor to confirm existing conditions and resolve discrepancies between documents. V. COMPUTER COMPATIBILITY REQUIREMENTS A. COMPUTER SYSTEMS. The Contractor shall develop all documents on a PC computer system, and submitted on a CD-ROM. In addition, the Contractor shall ensure that all inserted "objects" within computer files are "embedded" rather than "linked" to ensure transportability of the files. B. REPORTS. Unless otherwise specified, the Contractor shall ensure that all electronic report submittals listed in SECTION F - Schedule of Deliverables are submitted as one, self-contained file in Adobe Acrobat version 9.0 format. In addition, the Contractor shall ensure that the transmitted files do not have any of the security options set when submitted to the Government. C. CAD DRAWINGS. The Contractor shall develop all electronic drawings in a format which can be used directly (without conversion) by AutoCAD 2010 for Windows. In addition, the Contractor shall ensure that the drawing files include all custom fonts or menus used to modify the drawings, and more importantly, all external references (i.e., XREFs) are BOUND as opposed to ATTACHED. Drawing representations need only be in two dimensions although three dimensional imaging is acceptable. In addition, the Contractor shall ensure that the layering is in accordance with the CAD Layer Guidelines, Second Edition (1997) by the American Institute of Architects (AIA). D. WORD PROCESSING. The Contractor shall develop all collaborative documents (e.g., reports, memoranda, letters, etc.) and all construction specifications in a format which can be used directly (without conversion) by Microsoft Word 2007. In addition, the Contractor shall ensure that the submitted electronic files shall include all custom graphics, fonts, templates, and macros used to develop the documents. E. SPREADSHEETS. The Contractor shall develop all spreadsheets in a format which can be used directly (without conversion) by Microsoft Excel 2007. In addition, the Contractor shall ensure that the submitted electronic files shall include all custom graphics, fonts, templates, and macros used to develop the spreadsheets. F. STANDARD OF CARE. It is the responsibility of the Contractor to ensure that all electronic copies of deliverables are in the proper format as identified above. In addition, the Contractor shall exercise an appropriate "standard of care" to ensure that all electronic copies of all deliverables are free from defect and shall utilize the latest antivirus software applications. The Contractor shall be responsible for any and all damages as a result of noncompliance with this requirement. - END OF STATEMENT OF WORK -
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NOAA/MASC/NMAN72001600456DLZ/listing.html)
 

Place of Performance

Address: Marine Operations - San Diego, 1839 Water Street, Tenth Ave. Marine Terminal< Crosby Road Gate, San Diego, California, 92101, United States

Zip Code: 92101
 

Record

SN03978590-W 20151230/151228233945-38ebb693aa26c0c897c824ae3155dafd (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |