SOURCES SOUGHT
34 -- HAAS Vertical Machining Center Model VF-12 with TR-210 Rotary
- Notice Date
- 1/11/2016
- Notice Type
- Sources Sought
- NAICS
- 333519
— Rolling Mill and Other Metalworking Machinery Manufacturing
- Contracting Office
- Department of the Navy, Naval Sea Systems Command, NSWC Corona Division, NSWC Corona Division, P.O. Box 5000, Corona, California, 92878-5000, United States
- ZIP Code
- 92878-5000
- Solicitation Number
- N64267-16-R-0033
- Archive Date
- 2/9/2016
- Point of Contact
- Brandon S. Zellers,
- E-Mail Address
-
brandon.zellers@navy.mil
(brandon.zellers@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- SOURCES SOUGHT NOTICE Closes 1/25/2016 The Naval Surface Warfare Center (NSWC), Corona Division, Measurement Science Department, Code MS22 requires the purchase of one (1) HAAS Vertical Machining Center Model VF-12 with TR-210 Rotary used for the repair and manufacturing of special interface gages, weapon systems prototypes, and support equipment. The Navy Gage & Standards Laboratory Machine Shop located in the Measurement Science & Technology Laboratory (MSTL) at NSWC Corona Division in Norco, CA has a requirement to repair and manufacture special interface gages, support equipment, and prototypes for mission critical weapon systems while reducing costs and increasing production efforts. In order to meet these requirements, the MSTL requires the acquisition of a HAAS Vertical Mill. The Haas parts and descriptions listed below are hard requirements in support of the warfighter. Required Parts: Qty Brand Part# Part Description 1 Haas VF-12/50 Vertical Machining Center; 150" x 32" x 30" (3810 x 813 x 762 mm), 50-taper geared-head, 30 hp (22.4 kW) vector drive, 7500 rpm, 30+1 side-mount tool changer, 360 ipm (9.1 m/min) X rapids, 600 ipm (15.2 m/min) Y & Z rapids, automatic chip auger, programmable coolant nozzle, color remote jog handle, 15" color LCD monitor, USB port, memory lock key switch, 1 MB program memory, rigid tapping and 95-gallon (360 liter) flood coolant system. Outriggers standard. Anchor kit highly recommended for installation. 1 Haas 4AXBL Allows the use of a fully integrated 4th-axis Haas rotary table or indexer for multi-sided machining, yielding increased productivity and reduced setups. 1 Haas 5AXBL Allows the use of a fully integrated 5th-axis Haas trunion for multi-sided machining, yielding increased productivity and reduced setups. Machine must have 4AXBL on machine to order 5AXBL 1 Haas TSC50T This through-spindle coolant system provides up to 300 psi (21 bar) of coolant to the cutting edge for heavy cuts, higher feed rates, deep hole drilling and better surface finishes. Max 12,000 rpm with TSC enabled. 1 Haas HIL Halogen lights provide bright, even illumination of the work area for part inspection, job set up and changeovers. Lights operate automatically when doors open and close, or can be activated manually. 1 Haas LS-6 Linear scales ensure absolute positioning accuracy along X, Y and Z axes by compensating for thermal variations. With 1-micron resolution, these scales deliver the extreme accuracy required for mold making and other high-precision applications. 1 Haas WIPS-R Intuitive Program System to guide operator through the steps of machine programming. 1 Haas ACF This 25-micron, #2 bag-type filter systems removes contamination and minute particles from the coolant before they can be recirculated through the coolant pump. Mandatory for machines with through-tool coolant when machining cast iron, cast aluminum, wood, phenolic and other particulate-producing materials. 1 Haas HV-ISO-XFRMR Internal High-Voltage Isolated Transformer for 380-480V operation. 1 Haas LK1 The Lifting Kit includes hardware and brackets necessary for lifting the machine. 1 Haas TPS24CT50 210 mm (8.27") Tilting 2-Axis Trunnion Rotary Table, with scale feedback on the A (tilting) axis. Requires Haas mill with 4th- and 5th-axis drives for true 4th- and 5th-axis operation. Scale feedback functional only on Haas mills with software version 1 1 Haas Misc Rigging to include: Unload and uncrate machine from truck. remove all packaging materials from site. Move and place machine in final position then rough level. Does not include utility connections. 1 Haas IUID_Tag IUID tag plate per MIL-STD-130x NOTE: Only information provided in the written Capability Statement shall be considered. BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES OR PROCURED THROUGH FULL AND OPEN COMPETITION. DISCLAIMER: THIS SOURCES SOUGHT NOTICE IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS NOTICE. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT NOTICE IS STRICTLY VOLUNTARY. Capability Statements shall be submitted via e-mail to: Brandon.zellers@navy.mil
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/d40eb5124554df225a651156fa5a7811)
- Record
- SN03987624-W 20160113/160111234119-d40eb5124554df225a651156fa5a7811 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |