SOLICITATION NOTICE
J -- DRYDOCK REPAIRS FOR THE USCGC KATHERINE WALKER
- Notice Date
- 2/9/2016
- Notice Type
- Presolicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 1, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102, United States
- ZIP Code
- 23510-9102
- Solicitation Number
- HSCG85-Q-16-P45885
- Point of Contact
- Sandra A Martinez, Phone: (757) 628-4591
- E-Mail Address
-
Sandra.A.Martinez@uscg.mil
(Sandra.A.Martinez@uscg.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The United States Coast Guard Surfaces Force Logistic Center, intends to issue a Commercial Request for Quote (RFQ) for DRYDOCK Repairs to the USCGC KATHERINE WALKER. The acquisition will be solicited as a Total Small Business Set-Aside. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation FAR Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a Best Value, Request for Quote (RFQ), on or about February 18, 2016. The solicitation will be issued electronically on the FEDBIZOPPS web page at http://www.fedbizopps.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for RFQ release and all subsequent amendments. Please sign up for the Auto Notification service to receive e-mail from FEDBIZOPPS when an action is taken under this solicitation. If you have questions regarding FEDBIZOPPS, contact Sandra Martinez at (757) 628-4591 or email sandra.a.martinez@uscg.mil. Hard copies of the specification and solicitation will not be issued. A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests via e-mail sandra.a.martinez@uscg.mil REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Force Logistics Center, Norfolk, VA to identify sources capable of providing the following: Contractor shall provide all necessary facilities, materials, equipment, and personnel to DRYDOCK repairs to the USCGC KATHERINE WALKER. The USCGC KATERINE WALKER'S is home ported in BAYONNE, NJ. SCOPE OF WORK: The scope of the acquisition is for the DRYDOCK repairs of the USCGC KATHERINE WALKER. This work will include, but is not limited to the following work items: WORK ITEM 1: Hull Plating (U/W Body), Inspect WORK ITEM 2: Hull Plating (U/W Body), Ultrasonic Testing WORK ITEM 3: Hull and Structural Plating (General) -10.2-Pound Steel, Repair WORK ITEM 4: Hull and Structural Plating (General) - 12.75-Pound Steel Plate, Repair WORK ITEM 5: Hull and Structural Plating (General) - 15.3-Pound Steel Plate, Repair WORK ITEM 6: Hull and Structural Plating (General) - 20.5-Pound Steel Plate, Repair WORK ITEM 7: Hull and Structural Plating (General) - 7.5-Pound (3/16") Steel Plate, Repair WORK ITEM 8: Hull and Structural Plating (General) - 7.65-Pound Steel Plate, Repair WORK ITEM 9: Appendages (U/W), Leak Test WORK ITEM 10: Appendages (U/W) - Internal, Preserve WORK ITEM 11: Chain Locker(s), Clean and Inspect WORK ITEM 12: Tanks (MP Fuel Stowage and Overflow), Clean and Inspect WORK ITEM 13: Voids (Non-Accessible), Leak Test WORK ITEM 14: Voids (Non-Accessible), Internal Surfaces, Preserve WORK ITEM 15: Tanks (MP Fuel Service), Clean and Inspect WORK ITEM 16: Tanks (Hydraulic Oil Stowage and Service), Clean and Inspect WORK ITEM 17: Tanks (Potable Water), Clean and Inspect WORK ITEM 18: Tanks (Lube Oil), Clean and Inspect WORK ITEM 19: Tanks (Ballast), Clean and Inspect WORK ITEM 20: Tanks (Dirty Oil and Waste), Clean and Inspect WORK ITEM 21: Z-Drive Propulsion Units, Overhaul WORK ITEM 22: SW Heat Exchangers, Clean, Inspect and Hydro WORK ITEM 23: Circuit Breakers (60 Hz), Inspect and Test WORK ITEM 24: Fathometer Transducer, Renew WORK ITEM 25: Underwater (Speed) Log Transducer(s), Renew WORK ITEM 26: Sea Strainers - Duplex (All Sizes), Overhaul WORK ITEM 27: Sea Bay, Clean and Inspect WORK ITEM 28: Sea Bay, Preserve 100% WORK ITEM 29: Compressed Air Receivers and System Valves (All), Clean, Inspect, Hydro and Lift WORK ITEM 30: Thruster Unit (General), Overhaul WORK ITEM 31: Hydraulic Chain Stoppers, Inspect And Service WORK ITEM 32: Hydraulic Cross deck Winches, Inspect and Service WORK ITEM 33: Hydraulic Inhaul Winch, Inspect and Service WORK ITEM 34: Mechanical Chain Stoppers, Inspect and Service WORK ITEM 35: Anchor Windlass, Inspect And Service WORK ITEM 36: Anchor Chain(s) and Ground Tackle, Inspect and Repair WORK ITEM 37: Warping Capstan (Aft), Inspect and Service WORK ITEM 38: Single Point Davit, Inspect and Service WORK ITEM 39: Buoy Crane, Inspect And Service WORK ITEM 40: Tanks (Ballast), Preserve "100%" WORK ITEM 41: Tanks (Ballast), Preserve "Partial" WORK ITEM 42: Chain Locker, Preserve 100% WORK ITEM 43: Chain Locker, Preserve - Partial WORK ITEM 44: Tanks (Dirty Oil and Waste), Preserve "100%" WORK ITEM 45: Tanks (Dirty Oil and Waste), Preserve "Partial" WORK ITEM 46: Tanks (Grey Water Holding), Preserve "100%" WORK ITEM 47: Tanks (Potable Water), Preserve "100%" WORK ITEM 48: Tanks (Potable Water), Preserve "Partial" WORK ITEM 49: Decks - Exterior (Buoy or Construction Deck), Preserve 100% WORK ITEM 50: U/W Body, Preserve (100%) WORK ITEM 51: Hull Plating Freeboard, Preserve "100%" WORK ITEM 52: Superstructure, Preserve "100%" WORK ITEM 53: Cathodic Protection / Zinc Anodes, Renew WORK ITEM 54: Drydock WORK ITEM 55: Temporary Services, Provide - Cutter WORK ITEM 56: Sea Trial Performance, Support, Provide WORK ITEM 57: Watertight Hatches 1-50-1 and 01-89-2, Upgrade WORK ITEM 58: Bilges, Preserve WORK ITEM 59: Buoy Deck Cleats, Modify WORK ITEM 60: Power Assisted Griping System, Remove WORK ITEM 61: Buoy Crane Main Winch, CT Function, Remove WORK ITEM 62: Hydraulically Operated Cargo Hatch, Inspect and Service WORK ITEM 63: Potable Water Pneumatic Tank(s), Clean and Inspect WORK ITEM 64: Potable Water System Relief Valve, Overhaul or Renew WORK ITEM 65: Grey Water Piping, Clean and Flush WORK ITEM 66: Cargo Hatch Gasket, Renew WORK ITEM 68: Bridge and Crane Control Room Window Renew WORK ITEM 69: Weathertight Doors, Renew WORK ITEM 70: CPO Berthing Bulkhead Paneling, Renew WORK ITEM 71: Stanchion Inserts and/or Covers, Renew WORK ITEM 72: Buoy Deck Gunwales, Preserve WORK ITEM 73: Towing Bitts, Chocks, and Fairleads, Preserve Anticipated Period of Performance: The period of performance is anticipated to be for One Hundred Seventeen (117) calendar days with a start date of 29 June 2016 -24 October 2016 (Subject to change) NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,000 employees. All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. This solicitation is Subject to Availability of Funds. All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition contact the Contracting Official listed above
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/HSCG85-Q-16-P45885/listing.html)
- Place of Performance
- Address: CONTRACTOR'S FACILITY, United States
- Record
- SN04015455-W 20160211/160210042919-07560a0ad30a17fa2421445e792a4d7c (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |