Loren Data's SAM Daily™

Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe

J -- Repair and Maintenance of Three Champion-brand Compressors at the Environmental

Notice Date
Notice Type
811310 — Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
Contracting Office
CPOD US Environmental Protection Agency 26 West Martin Luther King Drive Mail Code: NWD Cincinnati OH 45268 USA
ZIP Code
Solicitation Number
Response Due
Archive Date
Point of Contact
Werwick, Brad
Small Business Set-Aside
Total Small Business
SYNOPSIS The U.S. Environmental Protection Agency (EPA), Testing and Advanced Technology Division (TATD), National Vehicle & Fuel Emissions Laboratory (NVFEL), Ann Arbor, Michigan, requires a contractor to rebuild three Champion-brand air compressors. The acquisition of these Commercial services will be a total small business set aside. This action will be processed in accordance with FAR Parts 12 and 13. The North American Industry Classification System (NAICS) code is 811310 ¿ Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance, with a small business size of $7.5 million. The Contractor shall inspect, provide maintenance, and rebuild the Champion air compressors utilizing customary parts, labor, supervision, and equipment necessary for each of the three air compressors. New Original Equipment Manufacturer (OEM) parts are preferred, but equal brand parts are acceptable. During the rebuild, two compressors shall remain in service at all times in order to maintain air to the building systems. Compressors are plumbed with shut off ball valves that allow service work to be performed while the system remains pressurized. At no time will the contractor stop or obstruct compressed air to NVFEL ¿s vital systems. Compressors are located on a mezzanine accessible by a ladder only. Assistance with a lift truck will be available to move heavy loads on to the mezzanine. All work shall be guaranteed for parts and labor for one year. The following is a list of work to be performed on each Champion air compressor: ¿Remove compressor pump from unit ¿Furnish and install new compressor pump ¿Furnish and install new drive belts ¿Test-run unit and check operations ¿Check for any unusual noise or vibration and correct if necessary ¿Operate the safety valves to be certain they are functioning ¿Check pulley and pulley clamp screws or set screws for tightness ¿Inspect pressure switch and contact points in motor starter ¿Evaluate motor for excessive current draw ¿Perform vibration analysis of electric motor on all three axes ¿Reinstall all covers ¿Cleanup work area The full Statement of Work, which will be included in the solicitation, describes and sets forth all requirements for the inspection, maintenance, and rebuild of the Champion air compressors. Award will be made on a Lowest-Priced, Technically Acceptable basis. The full solicitation should be issued on or about February 18, 2016 on FedConnect.net. This office does not intend to mail hard copies of the solicitation. Point of Contact for this requirement is Brad Werwick, Senior Contract Specialist, at (513) 487-2018, or by email at werwick.brad@epa.gov. Questions must be submitted in writing to Brad Werwick via email. Telephone queries will not be honored.
Web Link
FBO.gov Permalink
Place of Performance
Address: Testing and Advanced Technology Div US Environmental Protection Agency National Vehicle and Fuel Emissions 2565 Plymouth Road Ann Arbor MI 48105 USA
Zip Code: 48105
SN04018006-W 20160213/160211234553-38bcc8805653c3873af76d31e5b94524 (fbodaily.com)
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  © 1994-2020, Loren Data Corp.