Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF MARCH 05, 2016 FBO #5216
DOCUMENT

65 -- ORTHOPEDIC INSTRUMENT / IMPLANT SETS - Attachment

Notice Date

3/3/2016
 

Notice Type

Attachment
 

NAICS

339113 — Surgical Appliance and Supplies Manufacturing
 

Contracting Office

Department of Veterans Affairs;Network Contracting Office 4
 

Solicitation Number

VA24416Q0609
 

Response Due

3/2/2016
 

Archive Date

4/1/2016
 

Point of Contact

ANDREA AULTMAN-SMITH
 

E-Mail Address

ITIES
 

Small Business Set-Aside

N/A
 

Description

General The Department of Veterans Affairs Medical Center, VISN 4 Network Contracting Office (NCO), on behalf of the Wilkes-Barre VA Medical Center is conducting market research to determine interest for the procurement 3 SYNTHES Orthopedic Instrument/Implant sets that are used on a regular basis for trauma/fracture surgeries. Product Description The surgical Instrument/Implant sets are required for highly specialized orthopedic procedures, and the SYNTHES Instrument sets are the system of choice by the Orthopedic Surgeons at this facility because of their very unique characteristics which ensures patient safety and less chance of Implantation failure: The locking technology for plates and screws (set 1 and 2) is much better than other Instrumentation sets and unique to SYNTHES: when the screw is tightened into the holes of the plates, the holes are threaded and the screws are threaded, this makes the screw thread into the plate which locks it into place. This prevents screws from coming loose in the injured extremity - it lasts longer, stays tighter, less chance of bring back to the OR. The nailing set (set 3) uses a helical blade which is also unique to SYNTHES: this particular blade is used instead of a lag screw into the femoral which is safer and more effective because it is resistant to "cut out of the femoral head" - meaning other systems are more apt to fail when the implanted lag screw rubs through the femoral head. This is a Brand Name Only or Equivalent Requirement. Vendors offering an equivalent product must provide detailed product information in order to be considered. Vendors offering an equivalent product may be required, at no cost to the government, to provide samples of their products to review for product equivalency. Minimum Specification 1. Small Fragment Set #01.212.007-used to repair fractures of the ankle, clavicle, humerus, forearm, and distal tibia which includes the following Instruments/ Implants: 204.81063.5MM CORTEX SCREW SELF-TAPPING 10MM 204.81263.5MM CORTEX SCREW SELF-TAPPING 12MM 204.81463.5MM CORTEX SCREW SELF-TAPPING 14MM 204.81663.5MM CORTEX SCREW SELF-TAPPING 16MM 204.81863.5MM CORTEX SCREW SELF-TAPPING 18MM 204.82063.5MM CORTEX SCREW SELF-TAPPING 20MM 204.82263.5MM CORTEX SCREW SELF-TAPPING 22MM 204.82463.5MM CORTEX SCREW SELF-TAPPING 24MM 204.82663.5MM CORTEX SCREW SELF-TAPPING 26MM 204.82863.5MM CORTEX SCREW SELF-TAPPING 28MM 204.83063.5MM CORTEX SCREW SELF-TAPPING 30MM 204.83263.5MM CORTEX SCREW SELF-TAPPING 32MM 204.83463.5MM CORTEX SCREW SELF-TAPPING 34MM 204.83663.5MM CORTEX SCREW SELF-TAPPING 36MM 204.83863.5MM CORTEX SCREW SELF-TAPPING 38MM 204.84063.5MM CORTEX SCREW SELF-TAPPING 40MM 204.85063.5MM CORTEX SCREW SELF-TAPPING 50MM 206.02244.0MM CANCELLOUS BONE SCREW FULLY THREADED/22MM 206.02444.0MM CANCELLOUS BONE SCREW FULLY THREADED/24MM 206.02644.0MM CANCELLOUS BONE SCREW FULLY THREADED/26MM 206.02844.0MM CANCELLOUS BONE SCREW FULLY THREADED/28MM 206.03044.0MM CANCELLOUS BONE SCREW FULLY THREADED/30MM 206.04044.0MM CANCELLOUS BONE SCREW FULLY THREADED/40MM 206.04544.0MM CANCELLOUS BONE SCREW FULLY THREADED/45MM 207.01024.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/10MM 207.01224.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/12MM 207.01424.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/14MM 207.01624.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/16MM 207.01824.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/18MM 207.02024.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/20MM 207.02224.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/22MM 207.02424.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/24MM 207.02624.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/26MM 207.02824.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/28MM 207.04044.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/40MM 207.04544.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/45MM 207.61024.0MM CANNULATED SCREW SHORT THREAD/10MM 207.61224.0MM CANNULATED SCREW SHORT THREAD/12MM 207.61424.0MM CANNULATED SCREW SHORT THREAD/14MM 207.61624.0MM CANNULATED SCREW SHORT THREAD/16MM 207.61824.0MM CANNULATED SCREW SHORT THREAD/18MM 207.62024.0MM CANNULATED SCREW SHORT THREAD/20MM 207.62224.0MM CANNULATED SCREW SHORT THREAD/22MM 207.62424.0MM CANNULATED SCREW SHORT THREAD/24MM 207.62624.0MM CANNULATED SCREW SHORT THREAD/26MM 207.62824.0MM CANNULATED SCREW SHORT THREAD/28MM 207.63024.0MM CANNULATED SCREW SHORT THREAD/30MM 207.63224.0MM CANNULATED SCREW SHORT THREAD/32MM 207.63424.0MM CANNULATED SCREW SHORT THREAD/34MM 207.63624.0MM CANNULATED SCREW SHORT THREAD/36MM 207.63824.0MM CANNULATED SCREW SHORT THREAD/38MM 207.64024.0MM CANNULATED SCREW SHORT THREAD/40MM 207.64224.0MM CANNULATED SCREW SHORT THREAD/42MM 207.64424.0MM CANNULATED SCREW SHORT THREAD/44MM 207.64624.0MM CANNULATED SCREW SHORT THREAD/46MM 207.64824.0MM CANNULATED SCREW SHORT THREAD/48MM 207.65024.0MM CANNULATED SCREW SHORT THREAD/50MM 219.986WASHER 7.0MM 223.55123.5MM LCP PLATE 5 HOLES 72MM 223.56123.5MM LCP PLATE 6 HOLES 85MM 223.58123.5MM LCP PLATE 8 HOLES 111MM 223.59123.5MM LCP PLATE 9 HOLES 124MM 223.60123.5MM LCP PLATE 10 HOLES 137MM 223.62123.5MM LCP PLATE 12 HOLES 163MM 223.64123.5MM LCP PLATE 14 HOLES 189MM 241.03113.5MM LCP T-PLATE 3H HEAD/ 3H SHAFT/52MM-OBLIQUE RIGHT 241.04113.5MM LCP T-PLATE 3H HEAD/ 4H SHAFT/63MM-OBLIQUE RIGHT 241.05113.5MM LCP T-PLATE 3H HEAD/ 5H SHAFT/74MM-OBLIQUE RIGHT 241.07113.5MM LCP T-PLATE 3H HEAD/ 7H SHAFT/96MM-OBLIQUE RIGHT 241.13113.5MM LCP T-PLATE 3H HEAD/ 3H SHAFT/50MM-RIGHT ANGLE 241.14113.5MM LCP T-PLATE 4H HEAD/ 4H SHAFT/56MM-RIGHT ANGLE 241.15113.5MM LCP T-PLATE 3H HEAD/ 5H SHAFT/67MM-RIGHT ANGLE 241.16113.5MM LCP T-PLATE 4H HEAD/ 6H SHAFT/78MM-RIGHT ANGLE 241.17113.5MM LCP T-PLATE 3H HEAD/ 7H SHAFT/87MM-RIGHT ANGLE 241.3512LCP ONE-THIRD TUBULAR PLATE WITH COLLAR 5 HOLES/57MM 241.3612LCP ONE-THIRD TUBULAR PLATE WITH COLLAR 6 HOLES/69MM 241.3712LCP ONE-THIRD TUBULAR PLATE WITH COLLAR 7 HOLES/81MM 241.3812LCP ONE-THIRD TUBULAR PLATE WITH COLLAR 8 HOLES/93MM 241.4011LCP ONE-THIRD TUBULAR PLATE WITH COLLAR 10 HOLES/117MM 241.4211LCP ONE-THIRD TUBULAR PLATE WITH COLLAR 12 HOLES/141MM 241.90113.5MM LCP ® PROXIMAL HUMERUS PLATE-STANDARD 3H SHAFT/90MM 241.90313.5MM LCP ® PROXIMAL HUMERUS PLATE-STANDARD 5H SHAFT/114MM 241.93113.5MM LCP T-PLATE 3H HEAD/ 3H SHAFT/52MM-OBLIQUE LEFT 241.94113.5MM LCP T-PLATE 3H HEAD/ 4H SHAFT/63MM-OBLIQUE LEFT 241.95113.5MM LCP T-PLATE 3H HEAD/ 5H SHAFT/74MM-OBLIQUE LEFT 241.97113.5MM LCP T-PLATE 3H HEAD/ 7H SHAFT/96MM-OBLIQUE LEFT 245.05113.5MM LCP RECONSTRUCTION PLATE 5 HOLES/70MM 245.06113.5MM LCP RECONSTRUCTION PLATE 6 HOLES/84MM 245.07113.5MM LCP RECONSTRUCTION PLATE 7 HOLES/98MM 245.08113.5MM LCP RECONSTRUCTION PLATE 8 HOLES/112MM 245.10113.5MM LCP RECONSTRUCTION PLATE 10 HOLES/140MM 245.12113.5MM LCP RECONSTRUCTION PLATE 12 HOLES/168MM 292.1211.25MM KIRSCHNER WIRE W/TROCAR POINT 150MM 292.2012.0MM KIRSCHNER WIRE W/TROCAR POINT 150MM 292.7111.6MM KIRSCHNER WIRE WITH 5MM THREAD-TROCAR POINT 150MM 310.2122.0MM DRILL BIT/QC/125MM 310.2522.5MM DRILL BIT/QC/GOLD/110MM 310.28822.8MM DRILL BIT/QC/165MM 310.3523.5MM DRILL BIT/QC/110MM 310.891COUNTERSINK F/3.5MM CORTEX & 4.0MM CANCELLOUS BONE SCREWS 311.322TAP FOR 3.5MM CORTEX SCREWS GOLD/110MM 311.342TAP FOR 4.0MM CANCELLOUS BONE SCREWS/110MM 311.431HANDLE WITH QUICK COUPLING, SMALL 312.2012.0MM PARALLEL DRILL GUIDE AND DRILL SLEEVE 312.3013.5MM/2.5MM INSERT DRILL SLEEVE 312.64842.8MM THREADED DRILL GUIDE 314.021SMALL HEXAGONAL SCREWDRIVER WITH HOLDING SLEEVE 314.031SMALL HEXAGONAL SCREWDRIVER SHAFT 314.1151STARDRIVE(TM) SCREWDRIVER T15 314.1161STARDRIVE SCREWDRIVER SHAFT QC/T15 315.2822.7MM THREE-FLUTED DRILL BIT QC/125MM 319.011DEPTH GAUGE FOR 2.7MM & SMALL SCREWS 319.391SHARP HOOK 319.971SCREW FORCEPS 323.02321.6MM WIRE SLEEVE 323.0251DIRECT MEASURING DEVICE 323.0501INSERTION GUIDE 323.05323.5MM LOCKING SCREW SLEEVE 323.05422.8MM DRILL SLEEVE 323.05521.6MM WIRE SLEEVE 323.2612.7MM UNIVERSAL DRILL GUIDE 323.3613.5MM UNIVERSAL DRILL GUIDE 324.0231THREADED PLATE HOLDER 324.0241PUSH-PULL REDUCTION DEVICE 324.0311THREADED PLATE HOLDER-LONG FOR 3.5MM LOCKING HOLE 329.041BENDING IRON FOR 2.7MM & 3.5MM PLATES 329.051BENDING IRON FOR 2.7MM & 3.5MM PLATES 329.072BENDING IRON FOR 2.7MM & 3.5MM RECONSTRUCTION PLATES 329.8201BENDING TEMPLATE 12H FOR 3.5MM LC-DCP ® & DCP ® & LCP PLATES 329.871BENDING TEMPLATE 7 HOLES FOR 3.5MM LC-DCP & DCP ® PLATES 329.891BENDING TEMPLATE 9 HOLES FOR 3.5MM LC-DCP ® & DCP ® PLATES 391.821WIRE-BENDING PLIERS 160MM 392.001BENDING IRON FOR 1.25MM, 1.6MM & 2.0MM KIRSCHNER WIRES 398.401REDUCTION FORCEPS WITH POINTS NARROW-RATCHET 132MM 398.411REDUCTION FORCEPS WITH POINTS BROAD-RATCHET 398.8111PLATE HOLDING FORCEPS WITH SWIVEL FOOT/SIZE 0 399.0911BONE HOLDING FORCEPS-SOFT RATCHET F/PLATES TO 9MM WIDE 399.192SMALL HOHMANN RETRACTOR 8MM SHORT NARROW TIP 160MM 399.361PERIOSTEAL ELEVATOR 6MM CURVED BLADE-ROUND EDGE 399.492HOHMANN RETRACTOR 15MM 160MM 399.992REDUCTION FORCEPS WITH SERRATED JAW-RATCHET 144MM 511.7731TORQUE LIMITING ATTACHMENT 1.5NM/QUICK COUPLING 310.6712.7MM CANNULATED DRILL BIT/QC 160MM 310.861CANNULATED COUNTERSINK F/3.5MM & 4.0MM CANNULATED SCREWS 311.631CANNULATED TAP FOR 4.0MM CANNULATED SCREWS/147MM 312.3512.7MM/1.25MM DOUBLE DRILL SLEEVE 314.081HOLDING SLEEVE 314.291CANNULATED 2.5MM HEXAGONAL SCREWDRIVER 319.151CANNULATED SCREW MEASURING DEVICE FOR 3.5MM & 4.0MM 319.2511.35MM CLEANING BRUSH 319.3811.25MM CLEANING STYLET 900.722201.25MM THREADED GUIDE WIRE 150MM 202.81022.7MM CORTEX SCREW SELF-TAPPING 10MM 202.81222.7MM CORTEX SCREW SELF-TAPPING 12MM 202.81442.7MM CORTEX SCREW SELF-TAPPING 14MM 202.81642.7MM CORTEX SCREW SELF-TAPPING 16MM 202.81842.7MM CORTEX SCREW SELF-TAPPING 18MM 202.82042.7MM CORTEX SCREW SELF-TAPPING 20MM 202.82222.7MM CORTEX SCREW SELF-TAPPING 22MM 202.82422.7MM CORTEX SCREW SELF-TAPPING 24MM 202.82622.7MM CORTEX SCREW SELF-TAPPING 26MM 202.82822.7MM CORTEX SCREW SELF-TAPPING 28MM 202.83022.7MM CORTEX SCREW SELF-TAPPING 30MM 202.83222.7MM CORTEX SCREW SELF-TAPPING 32MM 202.83422.7MM CORTEX SCREW SELF-TAPPING 34MM 202.83622.7MM CORTEX SCREW SELF-TAPPING 36MM 202.83822.7MM CORTEX SCREW SELF-TAPPING 38MM 202.84022.7MM CORTEX SCREW SELF-TAPPING 40MM 202.84522.7MM CORTEX SCREW SELF-TAPPING 45MM 202.85022.7MM CORTEX SCREW SELF-TAPPING 50MM 202.85522.7MM CORTEX SCREW SELF-TAPPING 55MM 204.84263.5MM CORTEX SCREW SELF-TAPPING 42MM 204.84463.5MM CORTEX SCREW SELF-TAPPING 44MM 204.84663.5MM CORTEX SCREW SELF-TAPPING 46MM 204.84863.5MM CORTEX SCREW SELF-TAPPING 48MM 206.01424.0MM CANCELLOUS BONE SCREW FULLY THREADED/14MM 206.01634.0MM CANCELLOUS BONE SCREW FULLY THREADED/16MM 206.01834.0MM CANCELLOUS BONE SCREW FULLY THREADED/18MM 206.02044.0MM CANCELLOUS BONE SCREW FULLY THREADED/20MM 206.03524.0MM CANCELLOUS BONE SCREW FULLY THREADED/35MM 206.05024.0MM CANCELLOUS BONE SCREW FULLY THREADED/50MM 206.05524.0MM CANCELLOUS BONE SCREW FULLY THREADED/55MM 206.06024.0MM CANCELLOUS BONE SCREW FULLY THREADED/60MM 207.03024.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/30MM 207.03524.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/35MM 207.05024.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/50MM 212.10163.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 10MM 212.10263.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 12MM 207.05524.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/55MM 207.06024.0MM CANCELLOUS BONE SCREW PARTIALLY THREADED/60MM 207.65224.0MM CANNULATED SCREW-SHORT THREAD 52MM 207.65624.0MM CANNULATED SCREW-SHORT THREAD 56MM 207.65824.0MM CANNULATED SCREW-SHORT THREAD 58MM 207.66024.0MM CANNULATED SCREW-SHORT THREAD 60MM 207.66424.0MM CANNULATED SCREW-SHORT THREAD 64MM 207.66824.0MM CANNULATED SCREW-SHORT THREAD 68MM 207.67224.0MM CANNULATED SCREW-SHORT THREAD 72MM 212.10363.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 14MM 212.10463.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 16MM 212.10563.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 18MM 212.10663.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 20MM 212.10763.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 22MM 212.10863.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 24MM 212.10963.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 26MM 212.11063.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 28MM 212.11163.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 30MM 212.11263.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 32MM 212.11363.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 34MM 212.11563.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 36MM 212.11663.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 38MM 212.11763.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 40MM 212.12163.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 50MM 212.12463.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE(TM) RECESS 60MM 212.11863.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE RECESS 42MM 212.13463.5MM LOCKING SCREW SLF-TPNG WITH STARDRIVE RECESS 44MM 212.13663.5MM LOCKING SCREW SLF-TPNG WITH STARDRIVE RECESS 46MM 212.12063.5MM LOCKING SCREW SLF-TPNG W/STARDRIVE RECESS 48MM 212.12263.5MM LOCKING SCREW SLF-TPNG WITH STARDRIVE RECESS 52MM 02.212.05463.5MM LOCKING SCREW SLF-TPNG WITH STARDRIVE RECESS 54MM 02.212.05653.5MM LOCKING SCREW SLF-TPNG WITH STARDRIVE RECESS 56MM 02.212.05853.5MM LOCKING SCREW SLF-TPNG WITH STARDRIVE RECESS 58MM 207.65424.0MM CANNULATED SCREW-SHORT THREAD 54MM 204.85563.5MM CORTEX SCREW SELF-TAPPING 55MM 204.86063.5MM CORTEX SCREW SELF-TAPPING 60MM 206.01024.0MM CANCELLOUS BONE SCREW FULLY THREADED/10MM 206.01224.0MM CANCELLOUS BONE SCREW FULLY THREADED/12MM 61.212.0051SM FRAG LCP INSTR/IMPL SET GRAPHIC CASE W/O SCR RACK 690.3831SMALL FRAGMENT LCP ® CANNULATED SCREW RACK 690.3871SMALL FRAGMENT LCP ® CANNULATED SCREW INSTRUMENT TRAY 2. Distal Radius Set #01.119.010-used to repair wrist fractures and includes the following Instruments/Implants: 292.1211.25MM KIRSCHNER WIRE W/TROCAR POINT 150MM 292.1611.6MM KIRSCHNER WIRE W/TROCAR POINT 150MM 310.50921.8MM DRILL BIT WITH DEPTH MARK/QC/110MM 311.431HANDLE WITH QUICK COUPLING, SMALL 314.4531STARDRIVE SCREWDRIVER SHAFT T8 55MM 319.391SHARP HOOK 323.0292THREADED LCP(TM) DRILL GUIDE F/LCP(TM) DISTAL RADIUS PLATES 398.411REDUCTION FORCEPS WITH POINTS BROAD-RATCHET 399.181SMALL HOHMANN RETRACTOR 6MM SHORT NARROW TIP 160MM 399.4811PERIOSTEAL ELEVATOR 3MM CURVED BLADE - ROUND EDGE 399.491HOHMANN RETRACTOR 15MM 160MM 399.971REDUCTION FORCEPS WITH POINTS RATCHET 130MM 511.7761TORQUE LIMITING ATTACHMENT 0.8NM/QUICK COUPLING 03.110.0051HANDLE FOR TORQUE LIMITING ATTACHMENT 03.111.0051DEPTH GAUGE FOR 2.0MM/2.4MM AND 2.7MM SCREWS 03.111.6001GUIDE BLOCK FOR 2 COLUMN PLATE 6 HOLE HEAD/RIGHT 03.111.6011GUIDE BLOCK FOR 2 COLUMN PLATE 6 HOLE HEAD/LEFT 03.111.7001GUIDE BLOCK FOR 2 COLUMN PLATE 7 HOLE HEAD/RIGHT 03.111.7011GUIDE BLOCK FOR 2 COLUMN PLATE 7 HOLE HEAD/LEFT 03.119.01011.8MM UNIVERSAL VARIABLE ANGLE LOCKING DRILL GUIDE/PURPLE 03.119.01112.4MM UNIVERSAL DRILL GUIDE PURPLE 03.119.01221.8MM DRILL GUIDE W/ MEASURING FOR GUIDE BLOCK/PURPLE 03.119.01422.0MM DRILL BIT/QC/125MM ORANGE 03.119.01812.7MM UNIVERSAL DRILL GUIDE ORANGE 03.119.0191STARDRIVE SCREWDRIVER SHAFT T8/105MM/PURPLE/ORANGE 02.111.63012.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 6H HD/3H SHAFT/RIGHT 02.111.63112.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 6H HD/3H SHAFT/LEFT 02.111.73012.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 7H HD/3H SHAFT/RIGHT 02.111.73112.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 7H HD/3H SHAFT/LEFT 02.210.11052.4MM VA LOCKING SCREW STARDRIVE 10MM 02.210.11252.4MM VA LOCKING SCREW STARDRIVE 12MM 02.210.114102.4MM VA LOCKING SCREW STARDRIVE 14MM 02.210.116102.4MM VA LOCKING SCREW STARDRIVE 16MM 02.210.118102.4MM VA LOCKING SCREW STARDRIVE 18MM 02.210.120102.4MM VA LOCKING SCREW STARDRIVE 20MM 02.210.122102.4MM VA LOCKING SCREW STARDRIVE 22MM 02.210.12452.4MM VA LOCKING SCREW STARDRIVE 24MM 02.210.12652.4MM VA LOCKING SCREW STARDRIVE 26MM 02.210.12852.4MM VA LOCKING SCREW STARDRIVE 28MM 201.76032.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 10MM 201.76232.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 12MM 201.76432.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 14MM 201.76632.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 16MM 201.76832.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 18MM 201.77032.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 20MM 201.77232.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 22MM 201.77432.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 24MM 201.77632.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 26MM 201.77832.4MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 28MM 202.87032.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 10MM 202.87232.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 12MM 202.87432.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 14MM 202.87632.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 16MM 202.87832.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 18MM 202.88032.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 20MM 202.88232.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 22MM 202.88432.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 24MM 202.88632.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 26MM 202.88832.7MM CORTEX SCREW SLF-TPNG WITH T8 STARDRIVE RECESS 28MM 02.210.08031.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/10MM 02.210.08231.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/12MM 02.210.08431.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/14MM 02.210.08631.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/16MM 02.210.08831.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/18MM 02.210.09031.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/20MM 02.210.09231.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/22MM 02.210.09431.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/24MM 02.210.09631.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/26MM 02.210.09831.8MM VA LOCKING BUTTRESS PIN WITH T8 STARDRIVE RECESS/28MM 60.116.3101LENGTH MARKER PUSH PIN/10MM FOR MODULAR GRAPHIC CASE SYS 60.116.3121LENGTH MARKER PUSH PIN/12MM FOR MODULAR GRAPHIC CASE SYS 60.116.3141LENGTH MARKER PUSH PIN/14MM FOR MODULAR GRAPHIC CASE SYS 60.116.3161LENGTH MARKER PUSH PIN/16MM FOR MODULAR GRAPHIC CASE SYS 60.116.3181LENGTH MARKER PUSH PIN/18MM FOR MODULAR GRAPHIC CASE SYS 60.116.3201LENGTH MARKER PUSH PIN/20MM FOR MODULAR GRAPHIC CASE SYS 60.116.3221LENGTH MARKER PUSH PIN/22MM FOR MODULAR GRAPHIC CASE SYS 60.116.3241LENGTH MARKER PUSH PIN/24MM FOR MODULAR GRAPHIC CASE SYS 60.116.3261LENGTH MARKER PUSH PIN/26MM FOR MODULAR GRAPHIC CASE SYS 60.116.3281LENGTH MARKER PUSH PIN/28MM FOR MODULAR GRAPHIC CASE SYS 60.116.4511LENGTH MARKER PUSH PIN/BLANK FOR MODULAR GRAPHIC CASE SYS 60.116.5071SCREW TYPE PUSH PIN/CORTEX FOR MODULAR GRAPHIC CASE SYS 60.116.5211SCREW TYPE PUSH PIN/VA LOCKING FOR MODULAR GRAPHIC CASE SYS 60.116.5251SCREW TYPE PUSH PIN/VA BUTTRESS F/MODULAR GC SYSTEM 60.119.0031LABEL PACK FOR ASC COMPACT SYSTEMS 60.119.0101COMPACT DISTAL RADIUS GRAPHIC CASE - ASC 60.119.0121VA IMPLANT RACK FOR COMPACT DISTAL RADIUS SYSTEM 02.111.65012.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 6H HD/5H SHAFT/RIGHT 02.111.65112.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 6H HD/5H SHAFT/LEFT 02.111.75012.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 7H HD/5H SHAFT/RIGHT 02.111.75112.4MM VA-LCP 2-CLMN VLR DSTL RADIUS PL 7H HD/5H SHAFT/LEFT 3. Trochanteric Fixation Nail Set (TFN) #105.641-used to repair hip fractures and includes the following Instruments/Implants: 321.201RATCHET WRENCH-11MM WIDTH ACROSS FLATS 321.251SPANNER WRENCH 351.051TISSUE PROTECTOR 357.410122.0MM/17.0MM PROTECTION SLEEVE 357.221HAMMER GUIDE FOR SLIDE HAMMER 357.251SLIDE HAMMER FOR HAMMER GUIDE 357.5151BALL HEX SCREWDRIVER 8MM FOR TI FEMORAL NAILS 360.2551REAMING ROD MEASURING DEVICE 393.101UNIVERSAL CHUCK WITH T-HANDLE 399.421HAMMER 500 GRAMS 357.4111INSERTION HANDLE F/TROCHANTERIC FIXATION NAILS 357.4121CANNULATED REVERSE AWL 357.3911RADIOGRAPHIC RULER F/TROCHANTERIC FIXATION NAILS 357.392117.0MM/3.2MM WIRE GUIDE 161MM 357.39313.2MM TROCAR 172MM 357.394117.0MM CANNULATED DRILL BIT LARGE QC/300MM 357.3951DRIVING CAP FOR 357.411 357.3972CANNULATED CONNECTING SCREW F/TROCHANTERIC FIXATION NAILS 357.3981CANNULATED SHAFT WITH 8MM HEX 125MM 357.399103.2MM GUIDE WIRE 400MM 690.3391TI TROCHANTERIC FIXATION NAIL INSERTION SET GRAPHIC CASE 105.6431TI TROCHANTERIC FIXATION NAIL LOCKING SET W/LOCKING SCREWS 314.111HOLDING SLEEVE 314.751HEXAGONAL SCREWDRIVER 357.3651125 DEG AIMING ARM F/TROCHANTERIC FIXATION NAILS 357.3661130 DEG AIMING ARM F/TROCHANTERIC FIXATION NAILS 357.3671135 DEG AIMING ARM F/TROCHANTERIC FIXATION NAILS 357.41315.6MM/3.2MM DRILL GUIDE 198MM 357.3691BLADE GUIDE SLEEVE FOR TROCHANTERIC FIXATION NAILS 357.3711BUTTRESS/COMPRESSION NUT FOR 357.369 357.3721HELICAL BLADE INSERTER 357.3771HELICAL BLADE COUPLING SCREW 357.3961EXTRACTION SCREW F/TROCHANTERIC FIXATION NAILS 357.3781HELICAL BLADE EXTRACTOR 357.381111.0MM/3.2MM WIRE GUIDE 222MM 357.38313.2MM TROCAR 232MM 357.3851HELICAL BLADE MEASURING DEVICE 357.386111.0MM/8.0MM PROTECTION SLEEVE 153MM 357.38714.0MM TROCAR 176MM 357.38918.0MM/4.0MM DRILL SLEEVE 164MM 357.4021LOCKING BOLT MEASURING DEVICE F/TROCHANTERIC FIXATION NAILS 360.2531HOLDING SLEEVE LOCKING DEVICE 357.40316.0MM/10.0MM STEPPED DRILL BIT CANNULATED/LARGE QC/435MM 357.404111.0MM TAPERED DRILL BIT CANNULATED/LARGE QC/280MM 357.4051DRILL STOP 357.40615.0MM FLEXIBLE HEXAGONAL SCREWDRIVER 357.40724.0MM THREE-FLUTED DRILL BIT QC/260MM/65MM CALIBRATION 357.414111MM CANNULATED HEXAGONAL SOCKET 357.41515.0MM HEXAGONAL SHAFT 210MM 357.4081CLEANING STYLET 357.4091CLEANING BRUSH 357.921MISS-A-NAIL AIMING JIG 315.4024.0MM THREE-FLUTED DRILL BIT QC/195MM 690.3401TI TROCHANTERIC FIXATION NAIL LOCKING SET GRAPHIC CASE 458.92625.0MM TI LOCKING SCREW 26MM- FOR IM NAILS 458.92825.0MM TI LOCKING SCREW 28MM- FOR IM NAILS 458.93025.0MM TI LOCKING SCREW 30MM- FOR IM NAILS 458.93225.0MM TI LOCKING SCREW 32MM- FOR IM NAILS 458.93425.0MM TI LOCKING SCREW 34MM- FOR IM NAILS 458.93625.0MM TI LOCKING SCREW 36MM- FOR IM NAILS 458.93825.0MM TI LOCKING SCREW 38MM- FOR IM NAILS 458.94025.0MM TI LOCKING SCREW 40MM- FOR IM NAILS 458.94225.0MM TI LOCKING SCREW 42MM- FOR IM NAILS 458.94425.0MM TI LOCKING SCREW 44MM- FOR IM NAILS 458.94625.0MM TI LOCKING SCREW 46MM- FOR IM NAILS 458.94825.0MM TI LOCKING SCREW 48MM- FOR IM NAILS 458.95025.0MM TI LOCKING SCREW 50MM- FOR IM NAILS 458.95225.0MM TI LOCKING SCREW 52MM- FOR IM NAILS 458.95425.0MM TI LOCKING SCREW 54MM- FOR IM NAILS 458.95625.0MM TI LOCKING SCREW 56MM- FOR IM NAILS 458.95825.0MM TI LOCKING SCREW 58MM- FOR IM NAILS 458.96025.0MM TI LOCKING SCREW 60MM- FOR IM NAILS 458.96425.0MM TI LOCKING SCREW 64MM- FOR IM NAILS 458.96825.0MM TI LOCKING SCREW 68MM- FOR IM NAILS 458.97225.0MM TI LOCKING SCREW 72MM- FOR IM NAILS 458.97625.0MM TI LOCKING SCREW 76MM- FOR IM NAILS 458.98025.0MM TI LOCKING SCREW 80MM- FOR IM NAILS 458.98525.0MM TI LOCKING SCREW 85MM- FOR IM NAILS 458.99025.0MM TI LOCKING SCREW 90MM- FOR IM NAILS 458.99525.0MM TI LOCKING SCREW 95MM- FOR IM NAILS 458.99925.0MM TI LOCKING SCREW 100MM- FOR IM NAILS 456.301111.0MM TI HELICAL BLADE 80MM 456.302111.0MM TI HELICAL BLADE 85MM 456.303111.0MM TI HELICAL BLADE 90MM 456.304111.0MM TI HELICAL BLADE 95MM 456.305111.0MM TI HELICAL BLADE 100MM 456.306111.0MM TI HELICAL BLADE 105MM 456.307111.0MM TI HELICAL BLADE 110MM 456.308111.0MM TI HELICAL BLADE 115MM 456.309111.0MM TI HELICAL BLADE 120MM 456.3112TI END CAP FOR TROCHANTERIC FIXATION NAILS 0MM EXT 456.3122TI END CAP FOR TROCHANTERIC FIXATION NAILS 5MM EXT 456.3132TI END CAP FOR TROCHANTERIC FIXATION NAILS 10MM EXT 456.318s111MM/130 DEG TI CANN TROCH FIXATION NAIL 170MM-STERILE 456.315s110MM/130 DEG TI CANN TROCH FIXATION NAIL 170MM-STERILE Delivery terms: Delivery shall be received to the facility location specified within, no later than (NLT) 30 days after receipt of order (ARO). Installation Not required. The North American Industry Classification System (NAICS) Code for this acquisition is 339113 Size Standard: 500, and the Classification code is 6515. THIS IS A SOURCES SOUGHT NOTICE ONLY. This notice does NOT constitute a request for proposal, request for quote, or invitation for bid. No formal solicitation document exists at this time. The Government will not pay for any information solicited. Interested parties should submit with their response only the following information: 1.Company name and DUN # 2.POC information 3.Business size and socio-economic classification (for example SDVOSB, Woman-owned) 4.Is this item available on FSS Schedule? If so, provide contract #. 5. Please email this information to andrea.aultman-smith@va.gov no later than Wednesday, March 2, 2016 no later than 3:00 PM EST. Phone inquiries will not be accepted..
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/PiVAMC646/PiVAMC646/VA24416Q0609/listing.html)
 

Document(s)

Attachment
 

File Name: VA244-16-Q-0609 VA244-16-Q-0609.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2592563&FileName=VA244-16-Q-0609-001.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2592563&FileName=VA244-16-Q-0609-001.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Place of Performance

Address: DEPARTMENT OF VETERANS AFFAIRS;WILKES-BARRE VA MEDICAL CENTER;1111 EAST END BLVD;WILKES-BARRE. PA

Zip Code: 18711
 

Record

SN04039541-W 20160305/160304000514-2872ec8d41bed4559ef845263d1d5f05 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |