Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF MARCH 11, 2016 FBO #5222
SOLICITATION NOTICE

56 -- Master BPA - Construction Materials and Tools

Notice Date

3/9/2016
 

Notice Type

Combined Synopsis/Solicitation
 

Contracting Office

4340 Magruder AVE, Fort jackson, SC 29207
 

ZIP Code

29207
 

Solicitation Number

W9124C-16-T-0033
 

Response Due

3/18/2016
 

Archive Date

9/14/2016
 

Point of Contact

Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
 

E-Mail Address

Clientservices@fedbid.com;
 

Small Business Set-Aside

Total Small Business
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W9124C-16-T-0033 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-87. The associated North American Industrial Classification System (NAICS) code for this procurement is 332216 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-03-18 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Jackson, SC 29207 The MICC Fort Jackson requires the following items, Brand Name or Equal, to the following: Base Period of Performance: 03/25/2016 - 03/24/2019 LI 001: 20' sections of #3 Rebar (3/8" Dia) See attachment for additional information., 1, EA; LI 002: Tie Wire (Secure C-Wire rows together) See attachment for additional information., 1, EA; LI 003: 6" Wire Loop Ties, 16 Ga SS Ties x 6-1/2" long See attachment for additional information., 1, EA; LI 004: Picket Pounder See attachment for additional information., 1, EA; LI 005: Wire Loop Tie Spinner See attachment for additional information., 1, EA; LI 006: 3-LB Sledge Octagonal Sledge Hammer with 12" Hickory Handle See attachment for additional information., 1, EA; LI 007: 7-1/4" Worm Drive 15-Amp Circular Saw, Corded See attachment for additional information., 1, EA; LI 008: 12" Compound Miter Saw See attachment for additional information., 1, EA; LI 009: 14" Steel Chop Saw, 15-Amp See attachment for additional information., 1, EA; LI 010: Rebar Cutter and Bender See attachment for additional information., 1, EA; LI 011: Cordless Drill 1/2" 18V drill/driver kit See attachment for additional information., 1, EA; LI 012: 50' Extension Cord, 12AWG (15-Amp) 3 prong. See attachment for additional information., 1, EA; LI 013: Heavy Duty Fiberglass Folding Saw Horses See attachment for additional information., 1, EA; LI 014: 50-in Clamp Edge Saw Guide See attachment for additional information., 1, EA; LI 015: Hammer, 20 ounce, ripping See attachment for additional information., 1, EA; LI 016: 50' Tape Measure, 3/8 IN See attachment for additional information., 1, EA; LI 017: Swanson Speed Square, Rafter Square Blade Length 8", Graduation (Inch), 1/8 Graduation Degrees See attachment for additional information., 1, EA; LI 018: Chalk Line Reel 125-100', Case Aluminum Alloy, Handle Metal See attachment for additional information., 1, EA; LI 019: Chain Saw W/ Cary Case, 70 CC w/ 24" Bar, 4.8 horsepower See attachment for additional information., 1, EA; LI 020: 16" Weedeater, Gas Powered, 31cc/1.4HP See attachment for additional information., 1, EA; LI 021: 7-1/4" Circular Saw Wood Saw Blades See attachment for additional information., 1, EA; LI 022: 7-1/4 in. 140-Teeth Steel Plywood Saw Blade See attachment for additional information., 1, EA; LI 023: 12" Compound Miter Saw Blade See attachment for additional information., 1, EA; LI 024: Steel Chop Saw Blade See attachment for additional information., 1, EA; LI 025: Extra Chalk, bottle See attachment for additional information., 1, EA; LI 026: 16D NAILS, Hand-Set, Common, 5-lb box - Length 3.5" x 0.162" Nominal Shank Diameter, about 250 nails per box See attachment for additional information., 1, EA; LI 027: 8 D NAILS, Hand-Set, Common, 5-lb. box - Length 2.5" x 0.131" Nominal Shank Diameter, about 500 nails per box See attachment for additional information., 1, EA; LI 028: 3'' Wood Screw, #18 (0.2947" Diameter), LB. Box, Typically ## screws per box, Course thread, Phillips flat head See attachment for additional information., 1, EA; LI 029: 2X4X8 SPF BOARD LUMBER See attachment for additional information., 1, EA; LI 030: 2X4X8, Pressure Treated Lumbar See attachment for additional information., 1, EA; LI 031: 2X4X16 Lumbar See attachment for additional information., 1, EA; LI 032: 2X6X8 Lumbar See attachment for additional information., 1, EA; LI 033: Uline Deluxe Steel Strapping Cart See attachment for additional information., 1, EA; LI 034: Steel Strapping (Standard Grade 1/2" Banding) See attachment for additional information., 1, EA; LI 035: Deluxe steel Strapping Tool See attachment for additional information., 1, EA; LI 036: X-Treme heavy-duty Ratchet strap w/ wire hooks See attachment for additional information., 1, EA; LI 037: Removable handle Ratchet Binders See attachment for additional information., 1, EA; LI 038: Hand Cable Puller (4-ton Cap.) See attachment for additional information., 1, EA; LI 039: 5Chain ( Grade 70) 5/16" X 90' Chromat Pail Transport Chain Laclede See attachment for additional information., 1, EA; LI 040: Weldless Silver Steel Cable 3/16 See attachment for additional information., 1, EA; LI 041: Black Collapsible Bulk Containers 47L" X 44W" With 2 Access Doors, Steel Corner Hit Plates See attachment for additional information., 1, EA; Option 1 Period of Performance: 03/25/2017 - 03/24/2018 LI 001: 20' sections of #3 Rebar (3/8" Dia), 1, EA; LI 002: Tie Wire (Secure C-Wire rows together), 1, EA; LI 003: 6" Wire Loop Ties, 16 Ga SS Ties x 6-1/2" long, 1, EA; LI 004: Picket Pounder, 1, EA; LI 005: Wire Loop Tie Spinner, 1, EA; LI 006: 3-LB Sledge Octagonal Sledge Hammer with 12" Hickory Handle, 1, EA; LI 007: 7-1/4" Worm Drive 15-Amp Circular Saw, Corded, 1, EA; LI 008: 12" Compound Miter Saw, 1, EA; LI 009: 14" Steel Chop Saw, 15-Amp, 1, EA; LI 010: Rebar Cutter and Bender, 1, EA; LI 011: Cordless Drill 1/2" 18V drill/driver kit, 1, EA; LI 012: 50' Extension Cord, 12AWG (15-Amp) 3 prong., 1, EA; LI 013: Heavy Duty Fiberglass Folding Saw Horses, 1, EA; LI 014: 50-in Clamp Edge Saw Guide, 1, EA; LI 015: Hammer, 20 ounce, ripping, 1, EA; LI 016: 50' Tape Measure, 3/8 IN, 1, EA; LI 017: Swanson Speed Square, Rafter Square Blade Length 8", Graduation (Inch), 1/8 Graduation Degrees, 1, EA; LI 018: Chalk Line Reel 125-100', Case Aluminum Alloy, Handle Metal, 1, EA; LI 019: Chain Saw W/ Cary Case, 70 CC w/ 24" Bar, 4.8 horsepower, 1, EA; LI 020: 16" Weedeater, Gas Powered, 31cc/1.4HP, 1, EA; LI 021: 7-1/4" Circular Saw Wood Saw Blades, 1, EA; LI 022: 7-1/4 in. 140-Teeth Steel Plywood Saw Blade, 1, EA; LI 023: 12" Compound Miter Saw Blade, 1, EA; LI 024: Steel Chop Saw Blade, 1, EA; LI 025: Extra Chalk, bottle, 1, EA; LI 026: 16D NAILS, Hand-Set, Common, 5-lb box - Length 3.5" x 0.162" Nominal Shank Diameter, about 250 nails per box, 1, EA; LI 027: 8 D NAILS, Hand-Set, Common, 5-lb. box - Length 2.5" x 0.131" Nominal Shank Diameter, about 500 nails per box, 1, EA; LI 028: 3'' Wood Screw, #18 (0.2947" Diameter), LB. Box, Typically ## screws per box, Course thread, Phillips flat head, 1, EA; LI 029: 2X4X8 SPF BOARD LUMBER, 1, EA; LI 030: 2X4X8, Pressure Treated Lumber, 1, EA; LI 031: 2X4X16 Lumber, 1, EA; LI 032: 2X6X8 Lumber, 1, EA; LI 033: Uline Deluxe Steel Strapping Cart, 1, EA; LI 034: Steel Strapping (Standard Grade 1/2" Banding), 1, EA; LI 035: Deluxe steel Strapping Tool, 1, EA; LI 036: X-Treme heavy-duty Ratchet strap w/ wire hooks, 1, EA; LI 037: Removable handle Ratchet Binders, 1, EA; LI 038: Hand Cable Puller (4-ton Cap.), 1, EA; LI 039: 5Chain ( Grade 70) 5/16" X 90' Chromat Pail Transport Chain Laclede, 1, EA; LI 040: Weldless Silver Steel Cable 3/16, 1, EA; LI 041: Black Collapsible Bulk Containers 47L" X 44W" With 2 Access Doors, Steel Corner Hit Plates, 1, EA; Option 2 Period of Performance: 03/25/2018 - 03/24/2019 LI 001: 20' sections of #3 Rebar (3/8" Dia), 1, EA; LI 002: Tie Wire (Secure C-Wire rows together), 1, EA; LI 003: 6" Wire Loop Ties, 16 Ga SS Ties x 6-1/2" long, 1, EA; LI 004: Picket Pounder, 1, EA; LI 005: Wire Loop Tie Spinner, 1, EA; LI 006: 3-LB Sledge Octagonal Sledge Hammer with 12" Hickory Handle, 1, EA; LI 007: 7-1/4" Worm Drive 15-Amp Circular Saw, Corded, 1, EA; LI 008: 12" Compound Miter Saw, 1, EA; LI 009: 14" Steel Chop Saw, 15-Amp, 1, EA; LI 010: Rebar Cutter and Bender, 1, EA; LI 011: Cordless Drill 1/2" 18V drill/driver kit, 1, EA; LI 012: 50' Extension Cord, 12AWG (15-Amp) 3 prong., 1, EA; LI 013: Heavy Duty Fiberglass Folding Saw Horses, 1, EA; LI 014: 50-in Clamp Edge Saw Guide, 1, EA; LI 015: Hammer, 20 ounce, ripping, 1, EA; LI 016: 50' Tape Measure, 3/8 IN, 1, EA; LI 017: Swanson Speed Square, Rafter Square Blade Length 8", Graduation (Inch), 1/8 Graduation Degrees, 1, EA; LI 018: Chalk Line Reel 125-100', Case Aluminum Alloy, Handle Metal, 1, EA; LI 019: Chain Saw W/ Cary Case, 70 CC w/ 24" Bar, 4.8 horsepower, 1, EA; LI 020: 16" Weedeater, Gas Powered, 31cc/1.4HP, 1, EA; LI 021: 7-1/4" Circular Saw Wood Saw Blades, 1, EA; LI 022: 7-1/4 in. 140-Teeth Steel Plywood Saw Blade, 1, EA; LI 023: 12" Compound Miter Saw Blade, 1, EA; LI 024: Steel Chop Saw Blade, 1, EA; LI 025: Extra Chalk, bottle, 1, EA; LI 026: 16D NAILS, Hand-Set, Common, 5-lb box - Length 3.5" x 0.162" Nominal Shank Diameter, about 250 nails per box, 1, EA; LI 027: 8 D NAILS, Hand-Set, Common, 5-lb. box - Length 2.5" x 0.131" Nominal Shank Diameter, about 500 nails per box, 1, EA; LI 028: 3'' Wood Screw, #18 (0.2947" Diameter), LB. Box, Typically ## screws per box, Course thread, Phillips flat head, 1, EA; LI 029: 2X4X8 SPF BOARD LUMBER, 1, EA; LI 030: 2X4X8, Pressure Treated Lumber, 1, EA; LI 031: 2X4X16 Lumber, 1, EA; LI 032: 2X6X8 Lumber, 1, EA; LI 033: Uline Deluxe Steel Strapping Cart, 1, EA; LI 034: Steel Strapping (Standard Grade 1/2" Banding), 1, EA; LI 035: Deluxe steel Strapping Tool, 1, EA; LI 036: X-Treme heavy-duty Ratchet strap w/ wire hooks, 1, EA; LI 037: Removable handle Ratchet Binders, 1, EA; LI 038: Hand Cable Puller (4-ton Cap.), 1, EA; LI 039: 5Chain ( Grade 70) 5/16" X 90' Chromat Pail Transport Chain Laclede, 1, EA; LI 040: Weldless Silver Steel Cable 3/16, 1, EA; LI 041: Black Collapsible Bulk Containers 47L" X 44W" With 2 Access Doors, Steel Corner Hit Plates, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Jackson intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Jackson is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2005); 252.246-70000 Material Inspection and receiving Report and Army Electronic Invoicing Instructions This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Sellers must present their representations and certifications, upon request, through the Online Representations and Certifications Application (ORCA) at http:orca.bpn.gov. New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be good for 30 calendar days after submission FOB Destination CONUS (CONtinental U.S.) No partial shipments unless otherwise specified at time of order In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under ?about WAWF?. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL Prior to submitting an agency protest, it is preferable that you first attempt to resolve your concerns with the responsible contracting officer. However, you may also file a protest to the Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 35 calendar days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. Headquarters U.S. Army Materiel Command Office of Command Counsel-Deputy Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 or email usarmy.redstone.usamc.mbx.protests@mail.mil The AMC-Level Protest procedures are found at: http://www.amc.army.mil/amc/commandcounsel.html. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. (End of Clause) Use NAICS Code: 332216
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/notices/15f48399721209913c5d381a441b772b)
 

Place of Performance

Address: Fort Jackson, SC 29207

Zip Code: 29207
 

Record

SN04044639-W 20160311/160309235622-15f48399721209913c5d381a441b772b (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |