SOURCES SOUGHT
J -- Depot level maintenance support for the Lightweight Laser Designator Rangefinder (LLDR
- Notice Date
- 3/11/2016
- Notice Type
- Sources Sought
- NAICS
- 541330
— Engineering Services
- Contracting Office
- Department of the Army, Army Contracting Command, ACC - APG (W56JSR) Division E, 6001 COMBAT DRIVE, Aberdeen Proving Ground, Maryland, 21005-1846, United States
- ZIP Code
- 21005-1846
- Solicitation Number
- W56JSR-16-R-0026
- Point of Contact
- Patricia R. Lewis, Phone: 4438614887, Clintonia Fletcher, Phone: 4438614886
- E-Mail Address
-
patricia.r.lewis22.civ@mail.mil, clintonia.m.fletcher.civ@mail.mil
(patricia.r.lewis22.civ@mail.mil, clintonia.m.fletcher.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- 1. Purpose : This Market Survey is issued to accomplish the following: (a) The Army Contracting Command-Aberdeen Proving Ground (ACC-APG) is seeking information from potential offerors with regard to Depot Level sustainment maintenance and repair services for the Lightweight Laser Designator Rangefinder (LLDR) systems: Range Finder - Target Designator, Laser (AN/PED-1, AN/PED-1A, and AN/PED-1B), Target Locator Module (AN/PSD-1(TLM), AN/PSD-1A (TLM II), AN/PSD-1B TLM IIH)), the Laser Designator Module (AN/PEQ-9 (LDM)), and the Diode Laser Designator Module (AN/PEQ-9A (DLDM)). These services are considered performance-based. (b) ACC-APG does not possess a Technical Data Package for the services. Any manufacturer, other than the approved source, interested in providing this material must also submit a complete Source Approval Request (SAR) package to be evaluated for future procurements. The SAR package will not be evaluated for the current acquisition. (c) The Approved/Intended Source is Northrop Grumman Corporation, CAGE 34860. The table below lists the nomenclature and National Stock Numbers (NSNs) of the systems and components: LLDR Repair Candidates for National Maintenance Contract NGLS Part # NSN Type Designator Nomenclature 20001000-19 1240-01-510-1022 AN/PSD-1 Target Locator Module A2002100-9 1240-01-596-5050 AN/PSD-1A Target Locator Module II A20025005-9 1240-01-606-1014 AN/PSD-1B Target Locator Module IIH 20002000-19 1260-01-510-1032 AN/PEQ-9 Laser Designator Module 20022200-9 1260-01-596-5078 AN/PEQ-9A Diode Laser Designator Module 1240-01-455-1791 AN/PED-1 Range Finder-Target Designators 1240-01-603-7760 AN/PED-1A Range Finder-Target Designators 1240-01-610-5566 AN/PED-1B Range Finder-Target Designators 2. Description : a. The applicable North American Industry Classification System (NAICS) is 541330, Engineering Services, with a Small Business Size Standard of $15 million. b. The Government anticipates that this acquisition will be a Firm Fixed Price (FFP) Indefinite Delivery Indefinite Quantity type contract with an anticipated Period of Performance of a One Year Base Period with four twelve month Option Years, and a provision for extension of services up to six months, if needed. 3. This notice is for planning purposes only and is not to be construed as a commitment by the Government. This is not a solicitation announcement. No reimbursement will be made for any costs associated with providing information in response to this announcement, or any follow-up information requests. The Government reserves the right to consider a total set-aside or a partial set-aside for small businesses or one of the small business preference groups (e.g., 8(a), HUBZone, SDVOSB, and WOSB, etc.). Any questions shall be submitted to the Contract Specialist via the email address listed below by the specified date. Any questions submitted after the specified date may not receive responses. 4. Responses to this Market Survey shall be submitted to U.S. Army Contracting Command-Aberdeen Proving Ground via e-mail to patricia.r.lewis22.civ@mail.mil. Please use reference No. W56JSR16R0026 when responding to this Market Survey. No telephone calls will be accepted. a. The closing date for this Market Survey is: 21 March 2016. b. The closing time for this RFI is: 12:00 Eastern Time c. The deadline for submission of questions is: 16 March 2016 Guidance for Small Business Respondents Small business firms having the capabilities to perform the tasking described in the DPWS for this Market Survey are encouraged to respond. Note: FAR Clause 52.219-14 (Limitations on Subcontracting). Response Format. Responses shall be prepared so that when printed, they meet the following requirements: 8.5x11 inch paper, single-spaced typed lines, 1 inch margins, 12 point Arial font. Tables may use 10-point font. Graphics or pictures are not allowed. Illustrations such as tables, flowcharts, organizational charts, process charts or other similar type informational charts may be used, and they will be counted against the page count limitations. Microsoft Word or Portable Document Format (pdf) shall be used. Instructions for Submitting Response. Responses shall include a Corporate Description Section and a Corporate Capabilities Section as described below. (1) Company name of respondent (2) State the respondent's size status and whether the respondent is registered in applicable NAICS code listed above. (3) Ownership, including whether: Small, Small Disadvantaged, 8(a), Women-Owned, HUBZone, Veteran Owned and/or Service Disabled Veteran-Owned Business; (4) Two Points of Contact, including: Name, title, phone, e-mail address, and website address (5) CAGE Code and DUNS Number (6) Affiliate information, including parent corporation, joint venture partners, potential teaming partners, prime contractor (if potential sub) or subcontractors (if potential prime) (7) A list of customers for current and relevant work performed. The purpose is to demonstrate the prime's management infrastructure, capacity to procure and manage a level of effort which may include, but is not limited to, teaming arrangements, joint ventures, etc. that correspond to the technical tasking, relevant experience, and past performance. Respondents shall submit at least 1, and no more than 3, citations of current and relevant work performed: a. Current work is defined as work performed within the 5 years before the posting date of this Market Survey. b. Common aspects of relevancy include similarity of services/support, complexity, dollar value, contract type, and degree of subcontract/teaming. This documentation must address, at a minimum, the following items: • Identification of the contractor as a Large or Small business. If a small business, please identify as 8(a), HUB Zone, Disadvantaged, Women-Owned, or non-disadvantaged. • Past performance for these items. The Contractor shall submit their part numbers, NSN, or nomenclature and the date of the last manufacturing effort of the same items for which they have manufacturing experience. Government contract numbers, if applicable, shall be provided. • The contractor shall cite the quality standard (either Government or Industry) that shall be in place for this effort. • The contractor must provide information to show that they possess, or shall possess, adequate experience, knowledge, production plant facilities (equipment, tooling, and space) to enable them, or their subcontractors, to support this item.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/b5ef3328e8c67e666999c54c9eb121bf)
- Record
- SN04047576-W 20160313/160311234347-b5ef3328e8c67e666999c54c9eb121bf (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |