MODIFICATION
61 -- Uninterruptible Power System (UPS) - AITL UPS Upgrade SOO 22 Mar 16
- Notice Date
- 3/22/2016
- Notice Type
- Modification/Amendment
- NAICS
- 335999
— All Other Miscellaneous Electrical Equipment and Component Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, AFTC/PZZ - Eglin, 102 W D Ave, Bldg 11, Ste 202, Eglin AFB, Florida, 32542, United States
- ZIP Code
- 32542
- Solicitation Number
- FA2486-16-R-0078
- Archive Date
- 4/9/2016
- Point of Contact
- Julie Miller, Phone: 575-572-1244, Jonathan A. Heitkam, Phone: 5755721245
- E-Mail Address
-
julie.miller.4@us.af.mil, jonathan.heitkam.2@us.af.mil
(julie.miller.4@us.af.mil, jonathan.heitkam.2@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- AITL UPS Upgrade SOO Updated 22 Mar 2016. The 96 Test Group, Holloman Air Force Base (AFB), NM intends to solicit, negotiate and award a requirement for an Uninterruptible Power System (UPS). Potential Offers should note funds are not currently available for this project and offers should be valid through 30 Apr 2016. Previous sources sought postings can be found on Federal Business Opportunities (FBO) webpage under the same solicitation number: FA2486-15-R-0324 The Contractor shall deliver the UPS meeting the specifications stated in the Statement of Objective (SOO). The acquisition will be full and open between all eligible vendors. The NAICS 335999, All Other Miscellaneous Electrical Equipment and Component Manufacturing. The set-aside will be Small Business for this acquisition. The Product Service Code is 6116, Electric Wire, and Power and Distribution Equipment. Delivery will be expected within 120 days after award. Any resulting contract will be Firm-Fixed Price. Procedures in accordance with FAR Part 12 and 15 will be used. The following is the anticipated CLIN Structure for the basic requirement: CLIN 0001: Uninterruptible Power System (UPS) Description: The contractor shall deliver and install an Uninterruptible Power System (UPS), including any required new cables, electrical conduit, and other components. If possible the contractor shall utilize existing wiring interfaces from the control system to circuit breaker panels. The specifications shall be in accordance with the SOO, reference 3.1. CLIN 0002: Motor-Generator Set Description: The contractor shall quote on a Motor-Generator Set. The system shall incorporate continuously running motor-generator where the generator is the final output stage and powers the load under the following conditions when the UPS is not bypassed. Any ancillary equipment required for the motor-generator shall be provided by the contractor. The specifications will be in accordance with the SOO, reference 5.4. CLIN 0003: Removal/Disposal Description: The contractor shall remove and stage all equipment and materials replaced, including battery racks. The specifications shall be in accordance with SOO, reference 4.0. CLIN 1001: Input Transformer (Option) Description: The contractor shall quote on an input transformer. This option CLIN will be awarded at the discretion of the Contracting Officer (if necessary) to achieve the required performance goals as stated in the SOO. The offeror must provide sufficient information as to their proposed solution to determine if exercising this option is in the best interest of the Government. The specifications will be in accordance with the SOO, reference 5.12.1. CLIN 1002: Concrete Pad (Option) Description: The contractor shall extend, modify, or replace the existing concrete pad if required to accommodate the proposed motor-generator, enclosure, and any required co-located ancillary equipment. This option CLIN will be awarded at the discretion of the Contracting Officer (if necessary) to achieve the required performance goals in the SOO. The offeror must provide sufficient information as to their proposed solution to determine if exercising the option is in the best interest of the Government. The specifications will be in accordance with the SOO, reference 5.10.2.2 CLIN 1003: Batteries 5 Minute (Option) Description: The contractor shall quote on a 5 Minute battery backup capacities. The Government reserves the right to exercise this option at any time prior to final delivery. This option CLIN will be awarded at the discretion of the Contracting Officer (if necessary) to achieve the required performance goals in the SOO. The offeror must provide sufficient information as to their proposed solution to determine if exercising this option is in the best interest of the Government. The specifications will be in accordance with SOO, reference 5.12.3.1. CLIN 1004: Batteries 15 Minute (Option) Description: The contractor shall quote on 15 Minute battery backup capacities. The Government reserves the right to exercise this option at any time prior to final delivery. This option CLIN will be awarded at the discretion of the Contracting Officer (if necessary) to achieve the required performance goals in the SOO. The offeror must provide sufficient information as to their proposed solution to determine if exercising this option is in the best interest of the Government. The specifications will be in accordance with SOO, reference 5.12.3.2. CLIN 1005: AITL to Motor Generator Conduit Replacement (Option) Description: The contractor shall replace the control and power conduits running from the AITL building to the motor-generator enclosure if the existing conduits are shown by the contractor to be unusable. The Government reserves the right to exercise this option at any time prior to final delivery. This option CLIN will be awarded at the discretion of the Contracting Officer (if necessary) to achieve the required performance goals in the SOO. The offeror must provide sufficient information as to their proposed solution so as to enable the Government to determine if exercising the option is in the best interest of the Government. The specifications will be in accordance with the SOO, reference section 5.9 and 5.12.4. Salient Characteristics - See attached Statement of Objectives. IMPORTANT NOTICES: Prospective offerors must be registered in the System for Award Management (SAM) at www.sam.gov. You are required to create a user account to register and/or update your entity records (i.e., Commercial and Government Entity (CAGE) Code, DUNs number, etc.) in SAM which were previously located in separate CCR and ORCA websites. Paper copies will not be available. The contractor is responsible for obtaining the solicitation, amendments, and any other documentation from the FBO webpage. This information is necessary in order to receive award consideration. All questions concerning this notice should be submitted electronically via facsimile or email to the Points of Contact (POC) as indicated in this announcement. All information pertaining to this announcement, including technical (or other) questions and answers will be provided to/through the Contracting Officer ONLY to ensure equal distribution of information to interested parties via Federal Business Opportunities (FebBizOpps) at https://www.fbo.gov. Notice to Offeror(s)/Supplier(s): Funds are not presently available for this contract. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs. FAR 52.212‐01, Instructions to Offeror - Commercial Items The contractor shall provide the following items with their proposal: 1. Volume I: 1.1. Provide prices for CLINs 0001 through 0003 and Options 1001 through 1005 in a contractor generated document clearly identifying each CLIN and any relevant pricing information. 1.2. The offeror shall complete pricing for all CLINs, base and option to be considered compliant. 2. Volume II: 2.1. Technical submission not to exceed 30 pages. This document shall describe the proposed items in sufficient detail allowing the Government to ascertain if all requirements are met. 3. Offers shall be submitted in two printed copies and one electronic copy that can be opened with Microsoft Office programs. FAR 52.212‐02, Evaluation - Commercial Items, The Government shall evaluate proposals to ensure they include the following items: 1. Volume I: 1.1. Prices for CLINs 0001 through 0006 in a contractor‐generated document. 1.2. Complete pricing for all CLINs, base and option, must be provided to be considered compliant. 1.3. The Government shall evaluate the total award amount to include base and options to determine the lowest priced technically acceptable offer (LPTA). 2. Volume II: 2.1. Technical submission not to exceed 30 pages. The government may only review the first 30 pages of any submitted volume. Any requirements described outside of the 30 page limit may be determined technically unacceptable. 3. The Government shall verify that the offeror submitted two printed copies and one electronic copy that can be opened with Microsoft Office products and/or a pdf reader (i.e. Adobe). 4. Technical acceptability will be evaluated as "Pass/Fail" for each objective listed in the SOO. 5. The Government will award to the offeror that is the lowest total price to include base plus options that meets all of the requirements listed in the SOO. Pre-Proposal Conference will be on 11 Feb 2016 at 0900 in Building 1256. Interested parties will be required to notify Mr. Jonathan Heitkam at jonathan.heitkam.2@us.af.mil or Ms. Julie Miller at julie.miller.4@us.af.mil no later than 10:00 am MST on 8 Feb 2016. The 746 Test Squadron will conduct a Pre-proposal Conference on 11 Feb 2016 at Building 1256, Holloman AFB, NM. This is to allow interested vendors access to the current UPS in use and to observe site conditions. This will be an opportunity for industry and the Government to exchange ideas to improve the existing requirements. Attendees will need to arrive at the Visitor Center at the Holloman AFB Main Gate no later than 0800 (8:00 am) on 11 Feb 2016 to receive visitor passes. Depending on the number of vendors in attendance, the event may last until 1700 (5:00 pm). To attend the Preproposal Conference the vendors are required to submit an electronic visitor request (e-VAR) not later than close of business on 8 Feb 2016. Copies of this e-VAR shall be e-mailed to joseph.san_filippo@us.af.mil and jonathan.heitkam.2@us.af.mil. Those with current access to Holloman AFB must still provide an e-VAR for this event in order to participate. OTHER DETAILS: Holloman AFB is located about 9 miles west of Alamogordo, New Mexico on Highway 70/82; 90 miles north of El Paso, Texas, and 60 miles east of Las Cruces, New Mexico. Holloman AFB resides in Otero County. Point of Contact Julie Miller, Contract Specialist, Phone 575-572-1244, Email julie.miller.4@us.af.mil; Jonathan Heitkam, Contracting Officer, Phone 575-572-1245, Email jonathan.heitkam@us.af.mil. Contracting Office Address: 781 Dezonia Road, Building 1088, Holloman AFB, NM 88330.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/e0efdbbfb79e2752dc4b80a51d8f64d0)
- Place of Performance
- Address: City/State Holloman AFB New Mexico, Postal Code 88330, Country USA, Holloman AFB is located about 9 miles west of Alamogordo, New Mexico on Highway 70/82; 90 miles north of El Paso, Texas, and 60 miles east of Las Cruces, New Mexico. Holloman AFB resides in Otero County., Holloman AFB, New Mexico, 88330, United States
- Zip Code: 88330
- Zip Code: 88330
- Record
- SN04058424-W 20160324/160323000627-e0efdbbfb79e2752dc4b80a51d8f64d0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |