SOURCES SOUGHT
66 -- Seismic Sustainment Equipment
- Notice Date
- 3/22/2016
- Notice Type
- Sources Sought
- NAICS
- 334519
— Other Measuring and Controlling Device Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Space Command, 45CONS (Bldg 423), 1201 Edward H White II St MS 7200, Patrick AFB, Florida, 32925-3238, United States
- ZIP Code
- 32925-3238
- Solicitation Number
- FA2521-16-Q-B038
- Archive Date
- 4/19/2016
- Point of Contact
- James J. Honeycutt, Phone: 3214949950
- E-Mail Address
-
james.honeycutt.11@us.af.mil
(james.honeycutt.11@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- SOURCES SOUGHT: THIS IS NOT A NOTICE OF REQUEST FOR PROPOSAL BUT INFORMATION AND PLANNING PURPOSES ONLY! It does not constitute a solicitation and/or quote and is not to be construed as a commitment by the Government. The Request for Quotation (RFQ) number is FA2521-16-B038 shall be used to reference any written responses to this source sought. Patrick Air Force Base anticipates a requirement that is being considered under a small business set-aside program. The North American Industry Classification Systems (NAICS) Code proposed 334519. The size standard for NAICS is 500 employees. The requirement is to provide seismic analysis equipment. This is to include: • 3-Channel digitizer • Communication Interface Module Plus, CM3 and • Unlimited Data Rights for Digitizers, Communication Multiplexer, Station Processor, Authenticator, CIM3 Salient Characteristics: Digitizers and Firmware: 24-bit analog-to-digital converter, an 18-bit calibration channel, a temperature-compensated VCXO phase-locked to GPS time, an EIA-232 configuration port, 256 FLASH EPROM, 512 KB SRAM (up to 8 MB SRAM in the AIM24S-3 model), and a user-configurable sample rate from 4 samples per second to 2560 samples per second. High-speed EIA-232 or EIA-422 interface supporting synchronous or asynchronous ADCCP communications. Designed for very low noise performance at low frequencies, for application with broad-band seismometers and to provide up to three input channels. Enclosed in rugged containers for placement in 4-inch diameter boreholes. The CIM 3: is the communications interface between the field station and the local command and control. Building on the success of the CIM 3, the next generation CIM 3 is more capable and flexible, with greatly improved size, power demands, and reliability. The CIM 3 provides multipoint and multidrop array control over standard radio modems, a more flexible TCP/IP connection that can be routed over longer distances, and a flexible network appliance using high-integration components with the power of the Linux Operating System. Important features of the CIM 3 include verification of remote commands, one diagnostic RS-232 port, and an Intel PXA (StrongArm) processor. The compact, multipurpose CIM 3 is the only COTS product that both satisfies current treaty monitoring requirements and provides a standard software development platform that will be able to easily satisfy future requirements. NOTE: RESPONSES TO THIS SOURCES SOUGHT SHALL STATE IF THEY ARE A SUPPLIER OR MANUFACTURER! What is the purpose of the items: To provide primary seismic analysis software and hardware to collect, monitor, and analyze field seismic data. 45 CONS is interested in any size business that is capable of meeting this requirement. The government is also interested in all small businesses including (8(a), Historically Underutilized Business Zone, Service Disabled Veteran Owned Small Businesses (SDVOSB), or, if applicable based on NAICS code, Economically disadvantaged women-owned small business (EDWOSB) Women Owned Small Businesses (WOSB) that are interested in performing this requirement. The government requests interested parties submit a brief description of their company's business size (i.e. annual revenues and employee size), business status (i.e., 8(a), Historically Underutilized Business Zone, or SDVOSB, WOSB, EDWOSB, or small business) anticipated teaming arrangements, and a description of similar services offered to the Government and to commercial customers. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime and the work accomplished by the teaming partners. The Government will use this information in determining its small business set-aside decision." As stipulated in FAR 15.201, responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. No solicitation exists; therefore, do not request a copy of the solicitation. The decision to solicit for a contract shall be solely within the Government's discretion. Any information submitted by respondents to this sources sought synopsis is voluntary. This sources sought notice is not to be construed as a commitment by the Government, nor will the Government reimburse any costs associated with the submission of information in response to this notice. Respondents will not be individually notified of the results of any government assessments. The Government's evaluation of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside for small businesses, or any particular small business designation (e.g. SDVOSB, HUBZone, 8(a), WOSB, VOSB, etc.). All interested firms shall submit a capabilities package that explicitly demonstrates company capabilities-indicating examples of commercial sales-and product specifications related to this effort. Also indicate if you are the manufacturer, or provide the name and size of the manufacturer of the product(s) you will be supplying. Respondents are further requested to indicate their status as a Foreign-owned/foreign-controlled firm and any contemplated us of foreign national employees on this effort. Include in your capabilities package your DUNS, Cage Code, System for Award Management expiration date, GSA contract number and expiration (if applicable), and any related specifications/drawings. Responses may be submitted electronically to the following e-mail address: 45cons.lgcb.e-bids@us.af.mil AND james.honeycutt.11@us.af.mil RESPONSES ARE DUE NO LATER THAN 12:00 p.m. 4 Apr 2016
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFSC/45CONSb423/FA2521-16-Q-B038/listing.html)
- Place of Performance
- Address: Patrick AFB, Florida, 32925, United States
- Zip Code: 32925
- Zip Code: 32925
- Record
- SN04058947-W 20160324/160323001353-f278d7d68038043bc147890731258c1f (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |