Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF MARCH 27, 2016 FBO #5238
SOLICITATION NOTICE

34 -- Carbide End Mills - Kennametal Only

Notice Date

3/25/2016
 

Notice Type

Presolicitation
 

NAICS

333515 — Cutting Tool and Machine Tool Accessory Manufacturing
 

Contracting Office

Department of the Army, Army Contracting Command, ACC - WRN (W911PT)(WVA), 1 BUFFINGTON ST BLDG 10, Watervliet, New York, 12189-4000, United States
 

ZIP Code

12189-4000
 

Solicitation Number

W911PT16Q0069
 

Archive Date

4/12/2016
 

Point of Contact

Nicholas Ventresca, Phone: 5182665116, Nicholas Ventresca, Phone: 5182665116
 

E-Mail Address

nicholas.s.ventresca.civ@mail.mil, nicholas.s.ventresca.civ@mail.mil
(nicholas.s.ventresca.civ@mail.mil, nicholas.s.ventresca.civ@mail.mil)
 

Small Business Set-Aside

N/A
 

Description

**Important Notice to All Interested Parties: This is a presolicitation notice. Further information will not be made available until the solicitation is released to the public, on or around the estimated date listed below.** 80 EACH - MILL, END, CARBIDE, HI-PERFORMANCE, 20 MILLIMETER CUTTING DIAMETER, 20 MILLIMETER SHANK DIAMETER, 18.8 MILLIMETER NECK DIAMETER, 38 MILLIMETER LENGTH OF FLUTE, 60 MILLIMETER NECK LENGTH, 115 MILLIMETER OVERALL LENGTH, 5 FLUTE, 1.0 MILLIMETER CORNER RADIUS - KENNMETAL UDDE2000A5ARB, GRADE KC643M, ORDER # 3524531 40 EACH - MILL, END, CARBIDE, HI-PERFORMANCE, HARVI II UCDE, UNEQUAL FLUTE SPACING, 10 MILLIMETER CUTTING DIAMETER, 10 MILLIMETER SHANK DIAMETER, 22 MILLIMETER LENGTH OF CUT, 72 MILLIMETER OVERALL LENGTH, 5 FLUTE,.5 MILLIMETER CORNER RADIUS - KENNAMETAL UCDE1000A5ARA, GRADE KCPM15, ORDER # 4046383 80 EACH - MILL, END, CARBIDE, HI-PERFORMANCE,.375 INCH CUTTING DIAMETER,.375 INCH SHANK DIAMETER, 1.25 INCH LENGTH OF CUT, 3.0 INCH OVERALL LENGTH, 4 FLUTE, SHARP CORNER RADIUS - KENNAMETAL HPHV375S4125, GRADE KCPM15, ORDER # 4071888 80 EACH - MILL, END, CARBIDE, HI-PERFORMANCE,.375 INCH CUTTING DIAMETER,.375 INCH SHANK DIAMETER, 1.25 INCH LENGTH OF CUT, 3.0 INCH OVERALL LENGTH, 4 FLUTE WITH.030 INCH CORNER RADIUS - KENNAMETAL HPHV375S4125R030, GRADE KCPM15, ORDER # 4071890 120 EACH - MILL, END, CARBIDE, HI-PERFORMANCE, 1/2 INCH DIAMETER, 1.5 INCH LENGTH OF CUT, 4.0 INCH OVERALL LENGTH, 4 FLUTE,.03 INCH CORNER RADIUS - KENNAMETAL HPHV500S4150R030, GRADE KCPM15, ORDER # 4071921 80 EACH - MILL, END, CARBIDE, HI-PERFORMANCE,.125 INCH CUTTING DIAMETER,.125 INCH SHANK DIAMETER, 1/2 INCH LENGTH OF CUT, 2.0 INCH OVERALL LENGTH, 4 FLUTE, SHARP CORNER RADIUS - KENNAMETAL HPHV125S4050, GRADE KCPM15, ORDER # 4047697 80 EACH - MILL, END, CARBIDE, HI-PERFORMANCE, 3/16 INCH CUTTING DIAMETER, 3/16 INCH SHANK DIAMETER, 5/8 INCH LENGTH OF CUT, 2.25 INCH OVERALL LENGTH, 4 FLUTE,.03 INCH CORNER RADIUS - KENNAMETAL HPHV188S4063R030, GRADE KCPM15, ORDER # 4047712 120 EACH - MILL, END, CARBIDE, HI-PERFORMANCE,.25 INCH CUTTING DIAMETER,.50 INCH LENGTH OF CUT, 2.5 INCH OVERALL LENGTH, 4 FLUTE, SHARP CORNER RADIUS - KENNAMETAL HPHV250S4050, GRADE KCPM15, ORDER # 4047719 80 EACH - MILL, END, CARBIDE, HI-PERFORMANCE,.25 INCH CUTTING DIAMETER,.25 INCH SHANK DIAMETER, 1.0 INCH LENGTH OF CUT, 3.0 INCH OVERALL LENGTH, 4 FLUTE, SHARP CORNER RADIUS - KENNAMETAL HPHV250S4100, GRADE KCPM15, ORDER # 4047728 80 EACH - MILL, END, CARBIDE, HI-PERFORMANCE, HARVI II UCDE, UNEQUAL FLUTE SPACING, 1/2 INCH CUTTING DIAMETER, 1/2 INCH SHANK DIAMETER, 1.25 INCH LENGTH OF CUT, 3.0 INCH OVERALL LENGTH, 5 FLUTE, SHARP CORNER RADIUS - KENNAMETAL UCDE500J5BS, GRADE KCPM15, ORDER # 4048724 180 EACH - DRILL, CARBIDE, 8XD, 2.2 MILLIMETER CUTTING DIAMETER, 4 MILLIMETER SHANK DIAMETER, 26 MILLIMETER LENGTH OF FLUTE, 22 MILLIMETER DEPTH OF CUT, 66 MILLIMETER OVERALL LENGTH - KENNAMETAL B053A02200CPG, GRADE KC7325, ORDER # 4151744 Delivery Point: FOB Destination Delivery: 30 Days After Delivery of Contract, or Better Estimated Date of Solicitation: March 25, 2016 Brand Name Justification: This acquisition will be conducted as a brand name sole source procurement in accordance with FAR 6.302-1, 10 USC 2304(c)(1), for Kennametal brand only. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. SAM Notice: In order to be eligible for award, the successful offeror's System for Award Management (SAM) Registration must be active and include representations and certifications. Location of Posted Solicitation: This solicitation will be issued electronically, therefore hardcopies will not be provided. Upon release of the solicitation, it will be available on the Federal Business Opportunities website at https://www.fbo.gov and will be listed under Army Contracting Command ACC-Warren (ACC-WRN) (WVA). CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidder's mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments that may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of offers may render your offer nonresponsive and result in the rejection of same.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/notices/4e77bde1227bdc87efcd17eddad4da4e)
 

Place of Performance

Address: Watervliet Arsenal, Watervliet, New York, 12189, United States

Zip Code: 12189
 

Record

SN04062878-W 20160327/160325234240-4e77bde1227bdc87efcd17eddad4da4e (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |