SOLICITATION NOTICE
66 -- convertible manual wirebonder - Combined Synopsis Solicitation
- Notice Date
- 4/12/2016
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333999
— All Other Miscellaneous General Purpose Machinery Manufacturing
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B130, Gaithersburg, Maryland, 20899-1410, United States
- ZIP Code
- 20899-1410
- Solicitation Number
- NB687000-16-01342R
- Point of Contact
- Marc R. Zurasky, Phone: 3034973246
- E-Mail Address
-
marc.zurasky@nist.gov
(marc.zurasky@nist.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- Specifications Combined Synopsis Solicitation • Support 45o wedge bonding • Support 90o deep access wedge bonding • Support ribbon bonding • Support ball-wedge bonding • Wirebonder instrument shall support the above tooling using a single bonding head requiring minimal time (5-10 minutes) to change between tooling, and include clamps and wedges to these toolings • Wirebonder instrument shall support the following materials and material dimensions: o Gold wire: 0.0007 to 0.0030 inches (0.018 to 0.075 mm) o Gold ribbon: up to 0.001 x 0.01 inches (0.025 to 0.250 mm) o Gold ball: 0.0007 to 0.002 inches (0.018 to 0.050 mm) o Al wire: 0.0007 to 0.003 inches (0.018 to 0.075 mm) • Wirebonder instrument shall have adjustable tool heat • Wirebonder instrument shall have manual control over X, Y, Z bond position • Wirebonder instrument shall have greater than 0.670 inches (17 mm) of z-axis travel • Wirebonder instrument shall have greater than 10 inch (254 mm) throat • Wirebonder instrument shall have greater than 10 x 10 inch (254 x 254 mm) stage • Wirebonder instrument shall support adjustable bonding force from 10-250 grams • Wirebonder instrument shall support programmable bonding time from 0-999 ms • Wirebonder instrument shall support programmable number of bonds up to 21 stitches • Wirebonder instrument shall support at least 2 programmable ultrasonic power setpoints • Wirebonder instrument shall have at least 30 storable recipes • Wirebonder instrument will be powered using 110 VAC, 60 Hz Microscope and illumination kit • Instrument shall include a stereomicroscope with 15x eyepiece • Instrument shall include LED illuminator with power supply and mounting hardware • LED illuminator shall include up to two brightness setpoints Temperature Controller • Instrument shall include 400 W temperature controller Heated workholder • Heated workholder shall accommodate substrates up to 3.0 x 2.75 inches (75 x 70 mm) • Heated workholder shall have a mechanical clamp • Heated workholder shall be fixed height • Heated workholder shall be floating on stage • Heated workholder shall be vacuum attachable Adjustable height stage • Instrument shall include at least 5 inch (127 mm) of work space above stage top with adjustable height stage in place • Adjustable height stage must be removable to accommodate larger work pieces under the bonding area of the tool
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/NB687000-16-01342R/listing.html)
- Place of Performance
- Address: 325 Broadway, Boulder, Colorado, 80305, United States
- Zip Code: 80305
- Zip Code: 80305
- Record
- SN04081309-W 20160414/160413000200-e0effc341e43e9048ca441c50b8f5f74 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |