SOLICITATION NOTICE
28 -- CYLINDER HEAD ASSY
- Notice Date
- 4/12/2016
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 2, 1301 Clay St., Suite 807N, Oakland, California, 94612-5249, United States
- ZIP Code
- 94612-5249
- Solicitation Number
- HSCG40-16-Q-40280
- Archive Date
- 5/11/2016
- Point of Contact
- Victor D. Young, Phone: 4107626104
- E-Mail Address
-
victor.d.youngII@uscg.mil
(victor.d.youngII@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- THE USCG SURFACE FORCES LOGISTICS CENTER, IBCT PRODUCT LINE HAS A REQUIREMENT TO PROCURE THE ITEM NOTED BELOW. QUOTES MAY SUBMITTED BY EMAIL TO VICTOR.D.YOUNGII@ USCG.MIL OR FAXED TO 410-762-6570. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2005-87(APR6,16) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 811310 and the Small Business Size Standard is 500. This synopsis/solicitation is issued pursuant to FAR 6.203-1 and HSAM 3006.302-1. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.5. All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with System for Award Management (SAM) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is APR 26TH, 2016. Eastern Standard Time. Item 1: NSN: 2815-01-633-3965 PART NUMBER: 242-5328 MFG: CATERPILLAR INC DESCRIPTION DATA: P/N 335-6220 CYLINDER HEAD GROUP UPDATED PART NUMBER ABOVE SHOULD BE USED MFR CATERPILLAR DIESEL MFR DWG 3512B MFR ID 3512B MODEL 3512B SERIAL NUMBER TYPE 60 DEGREE V-12 POWER RATING NO OF CYLINDERS 12 CYCLES 4 STROKE DIESEL BORE 170MM (6.7 INCH) STROKE 190MM (7.5 INCH) SPEED DISPLACEMENT 51.8 L (3158 C.U.) CAGE 11083 CCF DATE 06-JUN-2007 REV DATE 01-AUG-2007 B54B LAPL 66-03 PCCN NOTE: THIS APL WAS CREATED FROM APL D66A00106CYLINDER HEAD USED ON THE CATERPILLAR 3512B DIESEL CYLINDER HEADS SHOULD BE OVERHUALED AND REPAIRED TO OEM STANDARDS AND SPECIFICATIONS TO LIKE NEW CONDITION AND PROVIDE LIKE NEW PERFORMANCE. IN ADDITION TO THE ATTACHED REFERENCED SPECIFICATIONS EACH PRESERVED HEAD SHALL BE INDIVIDUALLY PACKAGED IN ITS OWN WOODEN CRATE. EACH CYLINDER HEAD WILL BE WRAPPED IN A CLEAR PLASTIC BAG AND WILL CONTAIN DESSICANT PACKS. EACH CYLINDER HEAD SHALL BE SECURED TO THE BOTTOM INSIDE OF THE CRATE. THE CRATE SHALL BE CONSTRUCTED IN SUCH A MANNER AS TO PREVENT THECYLINDER HEAD FROM SHIFTING WITHIN. THE CRATE SHALL BE CAPABLE OF PROTECTING THE CYLINDER HEAD FROM DAMAGE DURING MULTIPLE SHIPMENTS BY COMMERCIAL CARRIER. Quantity: 12 EACH Delivery on or before: 07/08/2016 The items are used on various US Coast Guard vessels. Substitute part numbers are NOT acceptable. All items will be individually packaged and bar-code in accordance with Coast Guard specification SP-PP&M-001 REV'D. Inspection and acceptance shall take place at Destination after verification of preservation, Individual packaging and marking requirements and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment. Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, Baltimore MD. NOTE: DRAWINGS, SPECIFICATIONS OR SCHEMATICS ARE AVAILABLE FROM THIS AGENCY. It is anticipated that a purchase order shall be awarded as a result of this synopsis/solicitation. OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal. (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (MAY, 2014); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (MAY 2014) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.arnet.gov.; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (MAY 2014); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (MAY 2014). The following clauses listed within FAR 52.212-5 are applicable: FAR 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644). (ii) Alternate I (Oct 1995) of 52.219-6. (iii) Alternate II (Mar 2004) of 52.219-6; FAR 52.219-28, Post Award Small Business Program representation (Apr 2009)(15 U.S.C. 632(a)(2); FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (JUL 2010)(E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (Feb 1999); FAR 52.222-26, Equal Opportunity (Mar 2007)(E.O. 11246); FAR 52.222-36, Affirmative Action for Workers with Disabilities (Oct 2010)(29 U.S.C. 793); 52.223-18; Contractor Policy to Ban Text Messaging While Driving (Sep 2010) (E.O. 13513); FAR 225-13, Restrictions on Certain Foreign Purchase (Jun 2008) (E.o.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct 2003)(31 U.S.C. 3332). The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Contractors may obtain information on registration and annual confirmation requirements via the SAM accessed through https://www.acquisition.gov or by calling 866-606-8220, or 334-206-7828 for international calls.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/VPLMLCP/HSCG40-16-Q-40280/listing.html)
- Record
- SN04081321-W 20160414/160413000206-f76c93726c2b4067b3e54feecc9317f0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |