MODIFICATION
41 -- HEALY Control Air Dehydrator Units Overhaul
- Notice Date
- 4/27/2016
- Notice Type
- Modification/Amendment
- NAICS
- 334512
— Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 2, 1301 Clay St., Suite 807N, Oakland, California, 94612-5249, United States
- ZIP Code
- 94612-5249
- Solicitation Number
- HSCG40-16-S-31611
- Point of Contact
- Sarah E. Thompson, Phone: 4107626171
- E-Mail Address
-
sarah.e.thompson2@uscg.mil
(sarah.e.thompson2@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- Previous Posted under HSCG40-16-I-31611. NAICS Code has been updated to 334512 The United States Coast Guard is seeking sources for the recapitalization of two (2) low pressure control air dehydrator units, using HFC-134a refrigerant, aboard CGC HEALY. The Coast Guard's overall requirement is a reliable and sustainable (15 years minimum service life, all logistics elements addressed) automatic dehydrator for use in low pressure compressed air systems. Depending on lead time and availability, the Coast Guard intends for installation in January 2017 or January 2018. The dehydrator shall remove particulate matter, aerosols and water vapor from influent low pressure air and furnish clean, dry air as specified herein for use in propulsion control air systems, remote valve shut-down control, various auxiliary equipment and services such as; distilling plants, fuel and lube oil purifiers, boilers, incinerator, oily water separator, and science laboratory spaces. The dehydrator shall be designed for both continuous and intermittent operation. General Specifications include: Modular Construction - The dehydrator unit shall be shipboard deck mounted and of modular construction so as to fit through a marine type watertight door with an opening of 28" x 68" and 6" radius corners. The maximum dehydrator size shall be 32" Width x 52" Height x 34" Depth when fully assembled on the skid. No brazing or welding shall be required to fully assemble the components into a complete dehydrator unit. The dehydrator units shall have a minimum capacity of 100 standard cuft per minute (SCFM) at 125 psi. Units shall be corrosion-resistant in a marine atmosphere, self contained, and shall deliver air with a pressure dew point not exceeding 40º F. The dehydrator shall be capable of effluent flows from zero to 100 SCFM at 125ºF without requiring manual attention. The dehydrator shall meet the electrical requirements specified in MIL-STD-461 and MIL-E-917. Alternate solutions are encouraged. Some references in the Specification are subject to Export Control limitations or have otherwise restricted distribution, and have been deemed "limited access" and "export controlled" packages. In order to access these documents, vendors must be certified as a US or Canadian contractor by the Joint Certification Program (JCP) administered by the Defense Logistic Information Service. Instructions and procedures for being certified by JCP can be found at http://www.dlis.dla.mil/jcp/. Only those vendors that have current certification by JCP will be able to be granted explicit access to these packages by the USCG. SHIP CHECK: The USCGC HEALY (WAGB-10) will be available for a ship check on Tuesday, 17 May 2016 @1000 pst in Seattle, Wa. If vendors would like to attend please provide member information for security processing through email to: Contract Specialist: Sarah Thompson Email: sarah.e.thompson2@uscg.mil Port Engineer: CWO Mike Allen Email: Micheal.L.Allen2@uscg.mil The USCG intends to make USCGC HEALY (WAGB-10) available during the solicitation phase also for a ship check. REQUESTED INFORMATION: The USCG requires input concerning the businesses ability to meet requirements. Specifically: 1. Company name and DUNS Number; 2. Years in Operation; 3. SAM registration confirmation; 4. Business Size / Socioeconomic Group (Small, Large, Veteran Owned, etc) 5. What's available in the commercial marketplace? If using an existing design, please provide documentation showing application and effectiveness. If there are units available that diverges from the specification but that the market feels can meet the requirement, please note the unit, the advantages and the differences from specification. 6. What is the minimum lead time on a suitable Dehydrator System? Is expediting possible? 7. What is the minimum period needed to install the system onboard the HEALY at the cutters homeport? 8. What is your Rough Order Of Magnitude Estimate of the range of value of this proposed procurement? 9. Small business size status. 10. Customary market practices for contract financing. 11. Any other information pertinent to this RFI as it relates to the ability to provide a solution. SUBMISSION: In order for the USCG to consider industry feedback, please provide a response with requested information above, to Sarah Thompson through email by 12 May 2016 4:00pm Eastern Standard Time (EST). There is no solicitation associated with this announcement. Submission of a response to this Request for Information (RFI)/ attendance at a ship check is entirely voluntary. The voluntary submission of a response to this RFI shall not obligate the USCG to pay or entitle the submitter of information to claim any direct or indirect costs or charges or any other remuneration whatsoever. The USCG intends to share feedback received with USCG support contractors. Proprietary or business confidential markings that prohibit distribution to USCG support contractors should be included only where warranted. Solicitation documents will only be made available on www.fbo.gov; no paper solicitation packages will be made available. Please monitor the Federal Business Opportunities website for additional developments with this requirement.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/VPLMLCP/HSCG40-16-S-31611/listing.html)
- Place of Performance
- Address: USCGC HEALY (WAGB-20), 1519 Alaskan Way South, Seattle, Washington, 98134, United States
- Zip Code: 98134
- Zip Code: 98134
- Record
- SN04097474-W 20160429/160427234751-bfb464e67defb93497103fe57b94fd18 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |