FBODaily.com | FedBizOpps: MOD | 71 | Decor and Furniture

FBO DAILY - FEDBIZOPPS ISSUE OF JUNE 02, 2016 FBO #5305
MODIFICATION

71 -- Decor and Furniture

Notice Date: 5/31/2016
Notice Type: Modification/Amendment
Contracting Office: Bldg. 2-1105/C Macomb Street, Fort Bragg, NC 28310
ZIP Code: 28310
Solicitation Number: W91247-16-P-3BCT
Response Due: 6/9/2016
Archive Date: 12/6/2016
Point of Contact: Name: Petrina Stack, Title: Contract Specialist, Phone: 9103963058, Fax:
E-Mail Address: petrina.v.stack.civ@mail.mil;
Small Business Set-Aside: Total Small Business
Description: MODIFICATION NOTICE:Bids are being solicited under solicitation number W91247-16-P-3BCT. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 797809_01. GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. If FedBid receives notice that, due to inclusion of the FedBid Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the FedBid Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is a [ Small Business ] set-aside and only qualified sellers may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-06-09 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be in the Statement of Work. The MICC Fort Bragg requires the following items, Brand Name or Equal, to the following: LI 001: Brand name or equal to Plymold Model No. CD248S. An equal item shall meet the following characteristics: ?Camden Booth, 48?L X 46?H, single, upholstered back & seat cushion, ?Oakwood frame, standard ?Standard oak stain: natural., 16, EA; LI 002: Brand name or equal to Plymold Model No. CD248D. An equal item shall meet the following characteristics: ?Camden Booth, 48?L X 46?H, double, upholstered back & seat cushion, wood frame ?Oak frame, standard ?Standard oak stain: natural., 10, EA; LI 003: Brand name or equal to Plymold Model No. 36048WE20. An equal item shall meet the following characteristics: ?Table Top, rectangle, 36? X 48?, laminate top, oak edge (group 2) ?1 color inlay, standard; 1839-45 Designer 2 Wilson Art, Crystalline Braun ?A edge (1? X 1.25?) ? Standard Oak Stain, Wheat, 60, EA; LI 004: Brand name or equal to Plymold Model No. 7160130-H. An equal item shall meet the following characteristics: ?Metal Table Base ?H Series End Table Base, (2) 22? end bases, dining height, (2)3? diagram; columns, welded cross bar between columns, onyx texture ?734 Table Shox? Glide, ?? thread size, 0.30?-0.35? stud length, 0.245? stud diameter, automatic adjust, hydraulic design, steel ?Polyurethane and non-skid, impact resistant nylon (pack of 4), 60, EA; LI 005: Brand name or equal to Plymold Model No. 30036WE20. An equal item shall meet the following characteristics: ?Table Top, rectangle, 30? X 36?, laminate top, oak (group 2) ?2 each 1 color inlay, standard ?2 each 1839K-45 Designer 2 Wilson Art, Crystalline Braun ?2 each A edge (1? X 1.25?) ?2 each Standard Oak stain, wheat., 2, EA; LI 006: Brand name or equal to Plymold Model No. 7160330. An equal item shall meet the following characteristics: ?Metal Table Base; X Series Pedestal Table Base, 22? X 30? base spread, dining height, 3? dia. Steel column, onyx texture ?Standard finish, onyx texture ?734 Table Shox? Glide, ?? tread size, 0.30?-0.35? stud length, 0.245? stud diameter, automatic adjust, hydraulic design, steel, polyurethane and non-skid, impact resistant nylon (pack of 4)., 2, EA; LI 007: Brand name or equal to Plymold Model No. 36072WE2O. An equal item shall meet the following characteristics: ?Table top, rectangle, 36" x 72", laminate top, oak edge (group 2) ?1 color inlay, standard ?Designer 2 Wilson Art ?1839K?45 Designer 2 Wilson Art, Crystalline Braun ?A Edge (1" x 1.25") ?Standard Oak Stain, Wheat, 6, EA; LI 008: Brand name or equal to Plymold Model No. 7160130?H. An equal item shall meet the following characteristics: ?Metal table base ?H Series End Table Base, (2) 22" end bases, dining height, (2) 3" dia. columns, welded cross bar between columns, onyx texture ?734 Table Shox? Glide, 1/4" thread size, 0.30" ? 0.35" stud length, 0.245" stud diameter, automatic adjust, hydraulic design, steel, polyurethane and non?skid, impact resistant nylon (pack of 4), 6, EA; LI 009: Brand name or equal to Plymold Model No. 60000WE2O. An equal item shall meet the following characteristics: ?Table Top, round, 72" dia., laminate top, oak edge (group 2) ?33393?9 72" diameter custom size top; 1 color inlay, standard ?Designer 2 Wilson Art; 1839K?45 Designer 2 Wilson Art, Crystalline Braun ?A Edge (1" x 1.25") ?Standard Oak Stain, Wheat., 4, EA; LI 010: Brand name or equal to Plymold Model No. 7160130. An equal item shall meet the following characteristics: ?Metal table base ?X Series End Table Base, 22", dining height, 3" dia. column, onyx texture ?Standard finish, onyx texture ?6 pack 734 Table Shox? Glide, 1/4" thread size, 0.30" ? 0.35" stud length, 0.245" stud diameter, automatic adjust, hydraulic design, steel; polyurethane and non?skid, impact resistant nylon (pack of 4), 12, EA; LI 011: Brand name or equal to Plymold Model No. 48048WE2O. An equal item shall meet the following characteristics: ?Table Top, square, 48" x 48", laminate top, oak edge (group 2) ?2 each 1 color inlay, standard ?Designer 2 Wilson Art; 1839K?45 Designer 2 Wilson Art, Crystalline Braun ?A Edge (1" x 1.25") ?5RC Corner cut for 3/4 corner booth ?Standard Oak Stain, Wheat., 2, EA; LI 012: Brand name or equal to Plymold Model No. 7160530. An equal item shall meet the following characteristics: ?Metal table base ?X Series Pedestal Table Base, 36" x 36" base spread, dining height, 4" dia. steel column, onyx texture ?Standard finish, onyx texture ?2 pack 734 Table Shox? Glide, 1/4" thread size, 0.30" ? 0.35" stud length, 0.245" stud diameter, automatic adjust, hydraulic design, steel, polyurethane and non?skid, impact resistant nylon (pack of 4), 2, EA; LI 013: Brand name or equal to Plymold Model No. 30000WE2O. An equal item shall meet the following characteristics: ?Table Top, round, 30" dia., laminate top, oak edge ?1 color inlay, standard ?Designer 2 Wilson Art; 1839K?45 Designer 2 Wilson Art, Crystalline Braun ?A Edge (1" x 1.25") ?Standard Oak Stain, Wheat, 2, EA; LI 014: Brand name or equal to Plymold Model No. 7160230. An equal item shall meet the following characteristics: ?Metal table base ?X Series Pedestal Table Base, 22" x 22" base spread, dining height, 3" dia. steel column, onyx texture ?1 year warranty ?Standard finish, onyx texture ?2 pack 734 Table Shox? Glide, 1/4" thread size, 0.30" ? 0.35" stud length, 0.245" stud diameter, automatic adjust, hydraulic design, steel, polyurethane and non?skid, impact resistant nylon (pack of 4), 2, EA; LI 015: Brand name or equal to Plymold Model No. 36096WE2O. An equal item shall meet the following characteristics: ?Table Top, rectangle, 36" x 144", laminate top, oak edge ?33393?15 36" x 144" custom size top ?1 color inlay, standard ?Designer 2 Wilson Art; 1839K?45 Designer 2 Wilson Art, Crystalline Braun ?A Edge (1" x 1.25") ?Standard Oak Stain, Wheat, 1, EA; LI 016: Brand name or equal to Plymold Model No. 7160342. An equal item shall meet the following characteristics: ?Metal table base ?X Series Pedestal Table Base, 22" x 30" base spread, bar height, 3" dia. steel column, onyx texture ? Standard finish, onyx texture ? 3 pack 734 Table Shox? Glide, 1/4" thread size, 0.30" ? 0.35" stud length, 0.245" stud diameter, automatic adjust, hydraulic design, steel, polyurethane and non?skid, impact resistant nylon (pack of 4), 3, EA; LI 017: Brand name or equal to Plymold Model No. 24102WE?33393?17. An equal item shall meet the following characteristics: ?Counter Top, 24" x 180", laminate top, oak edge, 4" wood back splash ? 1 color inlay, standard; Designer 2 Wilson Art ? 1839K?45 Designer 2 Wilson Art, Crystalline Braun ? A Edge (1" x 1.25") ?Standard Oak Stain, Wheat, 2, EA; LI 018: Brand name or equal to Plymold Model No. 7160142. An equal item shall meet the following characteristics: ?Metal Table Base ?X Series End Table Base, 22", bar height, 3" dia. column, onyx texture ?Standard finish, onyx texture ?5 pack 734 Table Shox? Glide, 1/4" thread size, 0.30" ? 0.35" stud length, 0.245" stud diameter, automatic adjust, hydraulic design, steel, polyurethane and non?skid, impact resistant nylon (pack of 4), 10, EA; LI 019: Brand name or equal to Plymold Model No. 24102WE?33393?19. An equal item shall meet the following characteristics: ?Counter Top, 24" x 288", laminate top, oak edge, 4" wood back splash ?1 color inlay, standard ?Designer 2 Wilson Art; 1839K?45 Designer 2 Wilson Art, Crystalline Braun ?A Edge (1" x 1.25") ?Standard Oak Stain, Wheat, 2, EA; LI 020: Brand name or equal to Plymold Model No. 7160142. An equal item shall meet the following characteristics: ?Metal Table Base ?X Series End Table Base, 22", bar height, 3" dia. column, onyx texture ?Standard finish, onyx texture ?8 pack 734 Table Shox? Glide, 1/4" thread size, 0.30" ? 0.35" stud length, 0.245" stud diameter, automatic adjust, hydraulic design, steel, polyurethane and non?skid, impact resistant nylon (pack of 4), 16, EA; LI 021: Brand name or equal to Plymold Model No. 734 Packed 1st. An equal item shall meet the following characteristics: ?Table Shox? Glide, 1/4" thread size, 0.30" ? 0.35" stud length, 0.245" stud diameter, automatic adjust, hydraulic design, steel, polyurethane and non?skid, impact resistant nylon (pack of 4), 25, EA; LI 022: Brand name or equal to Plymold Model No. 24102SE?33393?22. An equal item shall meet the following characteristics: ?Millwork, Custom ?Laminated Divider Wall, 42" H x 144" L x 18" W. ABS 4" toe kick base. ?1839K?45 Designer 2 Wilson Art, Crystallne Braun, 2, EA; LI 023: Brand name or equal to Plymold Model No. 48048SE?33393?23. An equal item shall meet the following characteristics: ?Millwork, Custom ?Laminated Divider Wall, 42" H x 48" L x 18" W. ABS 4" toe kick base. ?1839K?45 Designer 2 Wilson Art, Crystallne Braun, 4, EA; LI 024: Brand name or equal to Plymold Model No. 481184?1?33384?26. An equal item shall meet the following characteristics: ?Apex Booth, 84" diameter round booth, 48"H, plain back, upholstered seat, black vinyl lower base with custom 132" counter wrapped around exterior of booth, 42" bar height ?2 each Designer 6 vinyl: Momentum Innuendo 09119394 Zefferus ?2 each (F2E) Oak finished both ends ?2 each Standard Oak Stain, Natural ?2 each Finished outside back ?2 each Designer 6 vinyl: Momentum Innuendo 09119394 Zefferus ?2 each Oak top cap ?2 each Standard Oak Stain, Natural ?2 each 24066WE?33393?24 Counter Top, 24" x 132" dia wrap?around laminate ?Top, oak edge (group 2), Wrapped around exterior of booth, bar height. ?2 each 1 color inlay, standard: ?2 each 1839K?45 Designer 2 Wilson Art, Crystallne Braun ?2 each A Edge (1" x 1.25") ?2 each Standard Oak Stain, Wheat ?6 each 7160142 X Series End Table Base, 22", bar height, 3" dia. column, onyx texture ?6 each Standard finish, onyx texture ?3 st 734 Table Shox? Glide, 1/4" thread size, 0.30" ? 0.35" stud length, 0.245" stud diameter, automatic adjust, hydraulic design, steel, polyurethane and non?skid, impact resistant nylon (pack of 4), 2, EA; LI 025: Brand name or equal to Plymold Model No. CD272S?33393?27. An equal item shall meet the following characteristics: ?Camden Booth, 3/4 Corner Booth, 46"H, 48" x 90" x 90" x 48", upholstered back & seat cushion, wood frame ?Designer 6 vinyl: Momentum Innuendo 09119394 Zefferus ?Oak frame, standard ?Standard Oak Stain, Natural, 2, EA; LI 026: Brand name or equal to MTS Seating Model No. PC 27/8CRUB GR18 Packed 4 each. An equal item shall meet the following characteristics: ?Como? Premium Comfort Banquet Stacking Chair, square upholstered back w/outside crossroads design, with handhold, silhouette style, COMFORTweb? seat with 2?1/4" COMFORTmode? foam, reeded legs, clear butyrate glides, grade 18 uph. ?12 year structural frame warranty, std. (no charge) ?Frame finish ? Standard powdercoat: ?M?7 Metaltone ? Espresso ?Grade 18 vinyl: Momentum Innuendo 09119394 Zefferus, 196, EA; LI 027: Brand name or equal to Florida Seating Model No. HC?980 GR7. An equal item shall meet the following characteristics: ?Arm Chair, upholstered square back, upholstered seat, European beechwood frame, Italian design, & manufacturing, grade 7 uph. ?Solar Oak finish ?Grade 7 Upholstery: Momentum Innuendo 09119394 Zefferus, 40, EA; LI 028: Brand name or equal to MTS Seating Model No. 984?30 GR18. An equal item shall meet the following characteristics: ?DinePlus 20? Bar Stool, rounded top upholstered back, COMFORTweb? seat with 2" COMFORTmode? foam, upholstered seat, footrest, non?marring clear butyrate glides, grade 18 uph. ?5 year structural frame warranty, standard. ?Frame finish ? Standard powdercoat ?M?7 Metaltone ? Espresso ?Grade 18 vinyl: Momentum Innuendo 09119394 Zefferus ?BAF? Black footrest cover, 65, EA; LI 029: Brand name or equal to Plymold Model No. 33393?28. An equal item shall meet the following characteristics: ?Booth Riser, 8" H x 246" L x 53" W, black hard rubber sides, surface indoor/outdoor carpet, aluminum corner guards, 3, EA; LI 030: Brand name or equal to Custom Model No. SHADES. An equal item shall meet the following characteristics: ?Solar shades, 5% openness, inside mount, 59" W x 64" H ?VALANCE 6" H Board wrapped with Momentum Innuendo 09119394 Zefferus, 70" W, 13, EA; LI 031: Brand name or equal to Custom Model No. SHADES. An equal item shall meet the following characteristics: ?Solar shades, 5% openness, inside mount, 48" W x 42" H ?VALANCE 6" H Board wrapped with Momentum Innuendo 09119394 Zefferus, 54" W, 2, EA; LI 032: Brand name or equal to Custom Model No. SHADES. An equal item shall meet the following characteristics: ?Lot consisting of antique bronze partition post assemblies. From 2" OD tubing, 4" flanges, dome tops, full channel frames and tempered glass panels with custom etched design (Logo artwork to be provided by end user). Posts and frames are to accept 1/4" x 16"H panels., 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Bragg intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Bragg is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The applicable NAICS code for this procurement is 337127 with the related size standard of 500 employees. The NAICS code identified herein must appear in FAR 52.212-3 "Offeror Representations and Certifications" in SAM and the vendor must be actively registered in that NAICS Prior to Award to be considered for any resulting contract. Failure to be properly registered at the time and date of award may render the quote nonresponsive. The award of this solicitation will be evaluated by the lowest price that is technically acceptable. The sum of all priced items and the quantity stated in this solicitation will be considered as a total price. a.The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items (DEC 2012). FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The Contractor shall comply with the FAR clauses that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: 52.202-1, 52.212-3, 52.204-7, 52.204-9, 52.212-4, 52.223-11, 52.225-13, 52.232-23, 52.233-1, 52.223-18, 52.237-2, 252.201-7000, 252.203-7002, 252.204.7008, 252.223-7006, 252.232-7010, 252.232-7003 and 252.243-7001. Upon request, the Contracting Officer will make their full text available. Also, the full text of a solicitation provision may be accessed electronically at this address: http://farsite.hill.af.mil and/or http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 52.203-3, Gratuities (APR 1984), 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2011); 252.246-70000 Material Inspection and receiving Report, Alternate I (OCT 2011) of 252.225-7001, 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (MAR 2008). Upon request, the Contracting Officer will make their full text available. Also, the full text of a solicitation provision may be accessed electronically at this address: http://farsite.hill.af.mil and/or http://www.acqnet.gov/far. Systems for Award Management (SAM). Offerors shall ensure their company is registered in the System for Award Management (SAM) database and has completed their annual representations and certifications through the SAM website. The Government transitioned from the Central Contractor Registration System (CCR) www.ccr.gov, and Online Representations and Certifications Application (ORCA) https://www.acquisition.gov, to the System for Award Management (SAM) https://www.sam.gov. Any reference to CCR or ORCA in this document is to be understood as SAM. New equipment ONLY. NO remanufactured or used products. NO "GREY" market items. Bid MUST be good for 60 calendar days after submission Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. No partial shipments unless otherwise specified. In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under ?about WAWF?. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://farsite.hil.af.mil and/or http://www.acqnet.gov/far. The Government will award a contract resulting from this solicitation to the responsible quoter whose quote conforming to the solicitation will be most advantageous to the Government, price and other factors considered; and are determined to be fair and reasonable. The following factors shall be used to evaluate offers: Price, Technical Capability, and Responsibility: Proposed quote will be evaluated for reasonableness using the price analysis techniques provided under FAR Part 13. The Government will review the contractor?s technical certifications to ensure that it reflects a sound approach and understanding of this requirement and that the contractor has the technical ability to successfully perform the requirement. The Contractor shall comply with the FAR clauses that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: The following FAR clauses in 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders--Commercial Items (MAY 2012), will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.222-50, 52.225-13, 52.232-34, 52.233-3, 52.233-4, 52.219-6, 52.219-8, 52.219-28, 52.222-3, 52.222-19, 52.225-1, 52.232-33, 52.203-13, 52.222-40, 52.222-41, 52.222-51, 52.222-53, 52.222-54, 52.226-6. Upon request, the Contracting Officer will make their full text available. Also, the full text of a solicitation provision may be accessed electronically at this address: http://farsite.hill.af.mil and/or http://www.acqnet.gov/far. As prescribed in 11.107(a), insert the following provision: Brand Name or Equal (Aug 1999) (a) If an item in this solicitation is identified as ?brand name or equal,? the purchase description reflects the characteristics and level of quality that will satisfy the Government?s needs. The salient physical, functional, or performance characteristics that ?equal? products must meet are specified in the solicitation. (b) To be considered for award, offers of ?equal? products, including ?equal? products of the brand name manufacturer, must? (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by? (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate ?equal? products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an ?equal? product, the offeror shall provide the brand name product referenced in the solicitation. (End of provision) The following kinds and minimum amounts of insurance are required in accordance with FAR clause 52.228-5 entitled, ?Insurance--Work on a Government Installation.? Workmen?s Compensation and Amount required by the State in which this Occupational Disease Insurance contract is performed KIND:AMOUNT: Employer?s Liability Insurance$100,000 Comprehensive General Liability$50,000 per occurrence Insurance for Bodily Injury Comprehensive Automobile Liability$200,000 per person $500,000 per occurrence for Bodily Injury and for Property Damage$20,000 per occurrence By Reference By Reference By Reference a.SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a solicitation provision may be accessed electronically at this address: http://farsite.hill.af.mil and/or http://www.acqnet.gov/far. a.If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures. (End of Clause) EVALUATION CRITERIA/BASIS OF AWARD Sellers understand that FedBid ranks all Bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified in the Buy Terms, below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price and technical capability. PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS?REPRESENTATION (DEVIATION 2016-O0003)(OCT 2015) (a) In accordance with section 101(a) of the Continuing Appropriations Act, 2016 (Pub. L. 114-53) and any subsequent FY 2016 appropriations act that extends to FY 2016 funds the same restrictions as are contained in section 743 of division E, title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235), none of the funds appropriated (or otherwise made available) by this or any other Act may be used for a contract with an entity that requires employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The prohibition in paragraph (a) of this provision does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (c) Representation. By submission of its offer, the Offeror represents that it does not require employees or subcontractors of such entity seeking to report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS (DEVIATION 2016-O0003)(OCT 2015) (a) The Contractor shall not require employees or subcontractors seekingto report fraud, waste, or abuse to sign or comply with internal confidentiality agreements or statements prohibiting or otherwise restricting such employees or contactors from lawfully reporting such waste, fraud, or abuse to a designated investigative or law enforcement representative of a Federal department or agency authorized to receive such information. (b) The Contractor shall notify employees that the prohibitions and restrictions of any internal confidentiality agreements covered by this clause are no longer in effect. (c) The prohibition in paragraph (a) of this clause does not contravene requirements applicable to Standard Form 312, Form 4414, or any other form issued by a Federal department or agency governing the nondisclosure of classified information. (d)(1) Use of funds appropriated (or otherwise made available) by the Continuing Appropriations Act, 2016 (Pub. L. 114-53) or any other FY 2016 appropriations act that extends to FY 2016 funds the same prohibitions as contained in sections 743 of division E, title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) may be prohibited, if the Government determines that the Contractor is not in compliance with the provisions of this clause. (2) The Government may seek any available remedies in the event the Contractor fails to perform in accordance with the terms and conditions of the contract as a result of Government action under this clause.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/notices/6ae412c142cc88812ab49e6a725df9e6)
Place of Performance: Address: See Statement of Work.; Zip Code: -
Record: SN04133656-W 20160602/160531234817-6ae412c142cc88812ab49e6a725df9e6 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

71 -- Decor and Furniture