MODIFICATION
J -- Dredge McFarland Overhaul - Amendment 5 - Amendment 0004 Drawings
- Notice Date
- 6/3/2016
- Notice Type
- Modification/Amendment
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Philadelphia, 100 Penn Square East, Wanamaker Bldg (RM 643), Philadelphia, Pennsylvania, 19107-3390, United States
- ZIP Code
- 19107-3390
- Solicitation Number
- W912BU-16-B-0007
- Archive Date
- 6/29/2016
- Point of Contact
- Justin Chung, Phone: 2156566773
- E-Mail Address
-
justin.chung@usace.army.mil
(justin.chung@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Drawings for Amendment 0004. Amendment 0004. The U.S. Army Corps of Engineers, Philadelphia District intends to award a firm-fixed price Job Order under a Master Agreement for Repair and Alteration of Vessels for the drydocking and repairs to the Dredge McFarland. The acquisition will be procured using the procedures listed in FAR part 14. The Invitation for Bid W912BU-16-B-0007 will be issued on 13 May 2016 with a bid opening date of 17 June 2016 at 1400 EST hours. Hard copies will not be available and written or fax requests will not be accepted. The official media of distribution for this IFB is the web. Contractors may download the IFB (including any drawings) and any amendments via the Federal Business Opportunities (FedBizOpps) web site at www.fbo.gov, on or after the issue date. It is the offeror's responsibility to monitor the FedBizOpps web site for any amendments. Interested firms must register at FedBizOpps in order to access the solicitation. Offerors are responsible for printing copies of the IFB and any amendments. All bids are to be delivered hard copy shall be delivered to the U.S. Army Corps of Engineers, Philadelphia District, Wanamaker Building, Room 643, 100 Penn Square East, Philadelphia, PA 19107-3390, Attn: Justin Chung. The general elements of work include, but are not limited to: drydocking, utilities and services, hopper door repairs, hull painting, dredge pump repairs, controllable pitch propulsion (CPP) system repairs, including If-Directed replacement of the P & S tailshafts and cutlass bearings; steel replacement, sea valve repairs and other miscellaneous maintenance as required. All required inspections for renewal of the ABS International Load Line Certificate will be performed during this availability. The Drydock Examination and Internal Structural Review and the Annual Inspection for renewal of the USCG Certificate of Inspection will also be performed during this availability. Vessel Information: The dredge McFARLAND is an all-steel, sea-going hopper dredge. Her hull dimensions are: 1) Length without Boom Overhang: 300', 0" 2) Length with Boom Overhang: 319'8" 3) Length Between Perpendiculars: 284'0" 4) Beam Molded: 72'0" 5) Depth Amidships [molded]: 33'0" 6) Normal Draft Aft: 16'6" 7) Normal Draft Forward: 15'3" 8) Registered Gross Tonnage: 6,036 long tons 9) Lightship Displacement: 4,007 long tons 10) Ballast, Fuel and Water: 400 long tons (apprx). [Normal being light on fuel and ballast. Actual draft must be taken prior to drydocking, and weight calculated.] The Government will deliver the vessel to the contractor facility. Upon completion of the work, the vessel will conduct dock and sea trials prior to delivery back to the Government. The period of performance is expected to start on or about 20 June 2016 and last 90 calendar days. Liquidated damages will be a part of any award and may be applied for failure to complete the work within the designated performance period. Important requirements contractors should be made aware of in advance: Prospective contractors must have, or be capable of, entering into a Master Agreement with the U.S. Army Corps of Engineers. Prospective contractors must also have a NAVSEA-approved drydock/graving dock, or be in possession of a signed and dated certificate from a Professional Engineer stating that the drydock facilities currently meet all of the requirements applicable to that type of drydocking facility listed in Military Standard No. MIL-STD-1625C(SH), dated 25 August 1987, and Notice 1, dated 30 December 1992. The area of consideration will be the East and Gulf Coasts of the U.S. Submissions from contractors outside of this area will not be considered. Contractors will be given the opportunity to visit the ship after issuance of the solicitation. The NAICS code is 336611 with a size standards of 1250 employees. This requirement is set-aside for small businesses. All offerors who provide goods or services to the Federal Government must be registered in the System for Award Management (SAM) located on the website https://www.sam.gov. Additionally, all Services Disabled/Veterans Owned Business or Veterans Owned Small Business must be registered with the Department of Veterans Affairs Center of Veterans Enterprise Vet Biz Registry located at https://www.vip.vetbiz.gov/. Questions can be directed to justin.chung@usace.army.mil. Please carbon copy megan.m.mcmullen@usace.army.mil and adriana.a.dunaway@usace.army.mil. Failure to carbon copy the above emails may result in your questions not being answered.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA61/W912BU-16-B-0007/listing.html)
- Record
- SN04137644-W 20160605/160603234213-af68d3b95535c0b5028800a67c8a68b3 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |