SOLICITATION NOTICE
67 -- in-vacuum x-ray camera - Reps and Certs
- Notice Date
- 6/10/2016
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333316
— Photographic and Photocopying Equipment Manufacturing
- Contracting Office
- Department of Energy, SLAC National Accelerator Lab, SLAC National Accelerator Lab, 2575 Sand Hill Road, Menlo Park, California, 94303, United States
- ZIP Code
- 94303
- Solicitation Number
- SLAC-266640
- Archive Date
- 7/9/2016
- Point of Contact
- Katherine A. Coh, Phone: 6509262770
- E-Mail Address
-
kcoh@slac.stanford.edu
(kcoh@slac.stanford.edu)
- Small Business Set-Aside
- N/A
- Description
- M365 Terms and Conditions Reps and certs "SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions." SLAC has a requirement for an in-vacuum x-ray camera for immediate use in the Resonant Coherent Imaging Station at LCLS. To match the desired solid angular acceptance, the camera sensor should provide about 28x28mm active area with 100% fill factor. The pixel size required for position reconstruction is about 14um given the operating distance. The maximum signal should be at least 100k electrons per pixel. The system noise should be below 20 electrons. It should be back-illuminated and uncoated with an entrance window suitable for applications at least as low as 500 eV and should have good collection efficiency up to at least 2keV. It should read out at 0.4 Hz or faster. The camera needs to run in vacuum in order to be moved within 10cm of the sample position. It should reach around 10^-5 Torr and needs built-in cooling. The body of the camera should fit within about 60x80x120mm. Provide a price and lead time quotation with signed Representation and Certifications by not later than June 24, 2016. Source selection will be based on lowest price technically acceptable method. Payment terms: N-30 Freight terms: FOB destination The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms & Conditions for Commercial Supplies and Services under $100,000 M365 (Rev 17Feb2015) will be made a part of the resulting order. Your firm is required to be registered in the System for Award Management (www.sam.gov).
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/SLAC/STAN/SLAC-266640/listing.html)
- Place of Performance
- Address: SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, California, 94025, United States
- Zip Code: 94025
- Zip Code: 94025
- Record
- SN04146005-W 20160612/160610234249-e4d702d60c6a83de93efd92f4b5fb59c (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |