MODIFICATION
71 -- Alternate Command Post and Link Operating System Console Furniture - UPDATED Combined Synopsis/Solicitation FA4661-16-Q-0064
- Notice Date
- 6/16/2016
- Notice Type
- Modification/Amendment
- NAICS
- 337214
— Office Furniture (except Wood) Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Global Strike Command, 7 CONS, 381 Third Street, Dyess AFB, Texas, 79607-1581, United States
- ZIP Code
- 79607-1581
- Solicitation Number
- FA4661-16-Q-0064
- Archive Date
- 7/13/2016
- Point of Contact
- Brittany Barlow, Phone: 325-696-1457, Erika L. Thornton, Phone: 325-696-4188
- E-Mail Address
-
brittany.barlow@us.af.mil, erika.thornton.1.@us.af.mil
(brittany.barlow@us.af.mil, erika.thornton.1.@us.af.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The Solicitation has been updated to reflect the change to the site visit time. The site visit will be held on 21 June 2016 at 10:00 A.M., not P.M. DEADLINE FOR RECEIPT OF OFFERS: 28 June 2016, 2:00 p.m. (CST). All quotes can be faxed to 325-696-4078 Attn: SSgt Brittany Barlow at brittany.barlow@us.af.mil or Capt Erika Thornton at emailed to erika.thornton.1@us.af.mil, or. For any questions call 325-696-2289. SITE VISIT: This solicitation cannot guarantee accuracy measurement. Bids that solely use the measurement information provided in this solicitation may not be correct. Therefore, it is HIGHLY encouraged to attend the site visit to take specific measurements needed to submit the most accurate quote possible. A site visit will be held on the following date/time: 21 June 2016/ 10:00 A.M. (CST). The meeting location will be at the main front gate of Dyess AFB, TX, at the intersection of Arnold Blvd and Dub Wright Blvd, Abilene, TX, at the Dyess Visitor's Center on 21 June 2016 at 9:40 A.M. (CST). REQUIREMENTS: Alternate Command Post (ACP): The contractor shall purchase and install three (3) ergonomically designed furniture consoles that have two (2) positions each for the alternate Command Post at Dyes AFB, Texas capable of supporting 24 hour operations. The consoles must have the ability to move from a seated to a standing position and include built-in storage between each position for binders and printing equipment. Each position (6 positions total) on each console, must have enough space for personnel to work with multiple checklist binders open and laid out. The console positions must have the ability to mount as many as 6 monitors to a vertical surface with swing arms to free up counter space. The consoles must be spacious enough to have multiple keyboards and peripheral items. The computer systems need to be hideaway and be able to be separated by 3 feet due to EMSEC (Emissions Security) requirements. The wiring and cabling must be able to be feed into the console via a raised floor and must not be visible. The furniture will not be located against the walls so the consoles must have built-in power sources, capable of handling the surge placed by the electronic systems they will house. There will also be multiple UPS that will need to be stored in the consoles themselves. The design should be somewhat triangular in shape. Bldg. 8032 Link Operations Center (LOC): 2. The contractor shall purchase and install ergonomically designed furniture consoles that have positions each for the link operators and a manager at building 8032, Dyess AFB, Texas capable of supporting 24 hour operations. The consoles must have the ability to move from a seated to a standing position and include built-in storage between each position for binders and printing equipment. Each position (7 positions total) on each console, must have enough space for personnel to work with multiple checklist binders open and laid out. The console positions must have the ability to mount as many as 6 monitors to a vertical surface with swing arms to free up counter space. The consoles must be spacious enough to have multiple keyboards and peripheral items. Integrate CPU storage within the frame structure of the console. The computer systems need to be hideaway and be able to be separated by 3 feet due to EMSEC (Emissions Security) requirements. The wiring and cabling must be able to be feed into the console via a raised floor and must not be visible. The furniture will not be located against the walls so the consoles must have built-in power sources, capable of handling the surge placed by the electronic systems they will house. There will also be multiple UPS that will need to be stored in the consoles themselves
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/10cd7f651ba39c100756d9bd66b974cc)
- Place of Performance
- Address: 7 BW/CP, 2nd Ave, Bldg. 6015/Room 114, DYESS AFB, Texas, 79607, United States
- Zip Code: 79607
- Zip Code: 79607
- Record
- SN04151701-W 20160618/160616234308-10cd7f651ba39c100756d9bd66b974cc (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |