MODIFICATION
51 -- Snap on Tools
- Notice Date
- 6/16/2016
- Notice Type
- Modification/Amendment
- Contracting Office
- 976 William H. Wilson Ave., Fort Stewart, GA 31314
- ZIP Code
- 31314
- Solicitation Number
- W9124M-16-Q-0011
- Response Due
- 6/30/2016
- Archive Date
- 12/27/2016
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W9124M-16-Q-0011 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-88. The associated North American Industrial Classification System (NAICS) code for this procurement is 333991 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-06-30 12:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be HUNTER ARMY AIRFIELD, GA 31409 The MICC Fort Stewart requires the following items, Brand Name Only (Exact Match), to the following: LI 001: 30 bolt cutter 1/2 rebar cap BAH4559-30, 5, EA; LI 002: 8 bench grinder BADDW758, 1, EA; LI 003: Telescoping gage, set LST52617, 1, EA; LI 004: 12 inch steel ruler RULER12, 2, EA; LI 005: Cap, Jaw. Copper WV4046, 3, EA; LI 006: 7/16in f/dr+lng comwr. SOEXL 14B, 2, EA; LI 007: 1/2in f/dr+lng comwr. SOEXL 16B, 2, EA; LI 008: 5/8in f/dr+lng comwr. SOEXL20B, 2, EA; LI 009: 11/16in f/dr+lng comwr. SOEXL22B, 2, EA; LI 010: 1/2in keyed air drill AT5000, 1, EA; LI 011: bulb, replacement, hazardous duty ECU50001, 3, EA; LI 012: shank/bit holder, magnetic, 9in. SGDMRC4-80, 2, EA; LI 013: torq wr, 1/2 inch dr hd 60-300ftlb. BRUTUS3R300, 4, EA; LI 014: 4pc mini pick/hook bimold hdl. JHW40201, 2, EA; LI 015: pick, straight, 9 ?? (247.7mm) PSLR4-3, 2, EA; LI 016: pick, hook, 9 ?? (247.7mm) PSLR4-1, 2, EA; LI 017: 0-100W/3 CONTACTPOINTS&ADAPTOR LST50699, 3, EA; LI 018: Set, Drill Bit, Cobalt, 60 Bits DBC260A, 2, EA; LI 019: Handle, Knurled, Locking Button, 19 1/4in L872RJ, 2, EA; LI 020: 7 inch diagonal Cutter 87ACFCT, 1, EA; LI 021: 12 inch, 5R Grad Full Flexible LST51348, 1, EA; LI 022: 3/8in Blue Nt Drvr NDD112BB, 4, EA; LI 023: Kit, Hole Saw and Arbor, 1 3/8 to 3, 9pcs LHS608B, 3, EA; LI 024: Torque Wr 1/2in 80t mech 30-150 QD3R1600A, 7, EA; LI 025: Industrial Hand Rivet Tool Kit HR-26PKC, 5, EA; LI 026: 18 Bolt Cutter 5/16 rebar cap BAH4559-18, 4, EA; LI 027: MDTR Custom Foam FOAMMDTR, 4, EA; LI 028: KRS1056BPBO Modified ALG11-121PBO, 4, EA; LI 029: KRS1056BPBO Modified ALG11-122PBO, 4, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Stewart intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Stewart is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. DFAR 252.211-7003, Item Identification and Valuation Reference: http://farsite.af.mil This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be good for 30 calendar days after submission FOB Destination CONUS (CONtinental U.S.) Shipping charges shall be included in the purchase cost of the products. Sellers shall deliver the products on the own conveyance to the location listed on the purchase order. No partial shipments unless otherwise specified at time of order. In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under ?about WAWF?. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL To request a questions and answers summary please email clientservices@fedbid.com or submit a request through the "submit a question" feature.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/ca9305963c0e9044859bc7afdfc8955c)
- Place of Performance
- Address: HUNTER ARMY AIRFIELD, GA 31409
- Zip Code: 31409
- Zip Code: 31409
- Record
- SN04152017-W 20160618/160616234547-ca9305963c0e9044859bc7afdfc8955c (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |