SOURCES SOUGHT
93 -- Sources Sought for Hidden Machine Readable Security Features
- Notice Date
- 6/16/2016
- Notice Type
- Sources Sought
- NAICS
- 339999
— All Other Miscellaneous Manufacturing
- Contracting Office
- Department of the Treasury, Bureau of Engraving and Printing (BEP), Office of Acquisition, 14th & C Streets, S.W., Washington, District of Columbia, 20228
- ZIP Code
- 20228
- Solicitation Number
- BEP-RFI-16-0330
- Point of Contact
- Fredrick Watson, Phone: 2028740709, Andrew S. Martin, Phone: 2028741695
- E-Mail Address
-
fredrick.watson@bep.gov, andrew.martin@bep.gov
(fredrick.watson@bep.gov, andrew.martin@bep.gov)
- Small Business Set-Aside
- N/A
- Description
- This is a Request for Information (RFI) only. This RFI is for informational planning purposes only and it should not to be construed as a commitment by the Government for any actual procurement of materials, machinery, or services. This notice does not constitute a solicitation or a promise of a solicitation in the future. This RFI does not commit the Government to a contract for any supply or service. Respondents are advised that the Government will not pay for any information or administrative costs incurred in response to this RFI. All costs associated with responding to this RFI are solely at the responding parties' expense. Respondents are solely responsible for properly marking and clearly identifying any proprietary information or trade secrets contained within their response. The Government will not be liable for nor suffer any consequential damages resulting from any proprietary information not properly marked and clearly identified. Proprietary information received in response to this RFI will be safeguarded and handled in accordance with applicable Government regulations. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract or agreement. The BEP will not be obligated to pursue any particular acquisition alternative as a result of this RFI. Responses to the RFI will not be returned. Not responding to this RFI does not preclude participation in any future solicitation, if one is issued. To reiterate, this is a RequThis is a Request for Information (RFI) only. This RFI is for informational planning purposes only and it should not to be construed as a commitment by the Government for any actual procurement of materials, machinery, or services. This notice does not constitute a solicitation or a promise of a solicitation in the future. This RFI does not commit the Government to a contract for any supply or service. Respondents are advised that the Government will not pay for any information or administrative costs incurred in response to this RFI. All costs associated with responding to this RFI are solely at the responding parties' expense. Respondents are solely responsible for properly marking and clearly identifying any proprietary information or trade secrets contained within their response. The Government will not be liable for nor suffer any consequential damages resulting from any proprietary information not properly marked and clearly identified. Proprietary information received in response to this RFI will be safeguarded and handled in accordance with applicable Government regulations. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract or agreement. The BEP will not be obligated to pursue any particular acquisition alternative as a result of this RFI. Responses to the RFI will not be returned. Not responding to this RFI does not preclude participation in any future solicitation, if one is issued. To reiterate, this is a Request for Information (RFI) (hereinafter Notice). This is NOT a solicitation for proposals, proposal abstracts, request for bids or quotations, nor, a promise to issue a solicitation in the future. The purpose of this RFI is to obtain knowledge and information for project planning purposes only The U. S. Department of the Treasury, Bureau of Engraving and Printing (BEP), is interested in obtaining, testing, and evaluating technologies and/or materials with potential application in device-assisted, user-interpreted counterfeit deterrent features on future generations of U. S. currency. Proposed counterfeit deterrent features should be novel and not widely available in the marketplace. Proposed features may be incorporated into the banknote or applied to the note. An effective device-assisted user-interpreted feature should be extremely difficult to simulate or duplicate, but should be easy to authenticate by the public using a ubiquitous, readily available and low cost device. Examples of these devices include but are not limited to optical filters, magnifiers, low cost laser pointers, LED flashlights, magnets, and cell phones. Technologies and/or materials submitted for consideration will be reviewed for inherent and relative effectiveness as a security feature, and may be further assessed for compatibility with design and production factors, durability, environmental acceptability, and other processing requirements. The Bureau will only consider technologies, materials, and detection systems for which at least laboratory feasibility has already been demonstrated (i.e. concept proven, lab prototypes or samples available). For initial screening purposes, interested parties are requested to submit: 1. preliminary samples and 2. a brief technical description to: Bureau of Engraving & Printing Office of Acquisitions Attn: Fredrick Watson 14th and C Streets, SW Washington, D.C. 20228-0001 The Bureau may submit offered technologies to outside technical experts under government contracts for their evaluation subject to the approval of the submitting party. Previously submitted materials or technologies need not be resubmitted. If you have any questions please contact Fredrick Watson via e-mail at Fredrick.Watson@bep.gov. Contracting Office Address: 14th and C Streets, SW Washington, D.C. 20228 The point of contact for this Notice is: Fredrick Watson Fredrick.Watson@bep.gov Phone: 202-874-0709 Secondary Point of Contact: Andrew Martin Contracting Officer Andrew.Martin@bep.gov Email responses to this Notice shall be sent to the attention of individuals listed above. Respondents are requested to submit the aforementioned Capability Statement to the point of contact identified below by no later than 2:00 PM Eastern Standard time, July 1, 2017. This Notice does not obligate the Government to award a contract or otherwise pay for the information provided in response. All costs associated with responding to this Notice are solely at the responding party's expense. The Government reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. Further, the Government may contact the vendor for additional information regarding the information submitted as part of this market research effort. Any organization responding to this Notice should ensure that its response is complete and sufficiently detailed. Information provided will be used to assess tradeoffs and alternatives available for the potential requirement and may lead to the development of a solicitation. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract or agreement. The BEP will not be obligated to pursue any particular acquisition alternative as a result of this notice. Responses to the notice will not be returned. Not responding to this notice does not preclude participation in any future solicitation, if one is issued. No proprietary, classified, confidential, or sensitive information should be included in your response. The Government reserves the right to use any non-proprietary technical information in any resultant solicitation(s). If so, respondents are solely responsible for properly marking and identifying such information within their response. st for Information (RFI) (hereinafter Notice). This is NOT a solicitation for proposals, proposal abstracts, request for bids or quotations, nor, a promise to issue a solicitation in the future. The purpose of this RFI is to obtain knowledge and information for project planning purposes only The U. S. Department of the Treasury, Bureau of Engraving and Printing (BEP), is interested in obtaining, testing, and evaluating technologies and/or materials with potential application in device-assisted, user-interpreted counterfeit deterrent features on future generations of U. S. currency. Proposed counterfeit deterrent features should be novel and not widely available in the marketplace. Proposed features may be incorporated into the banknote or applied to the note. An effective device-assisted user-interpreted feature should be extremely difficult to simulate or duplicate, but should be easy to authenticate by the public using a ubiquitous, readily available and low cost device. Examples of these devices include but are not limited to optical filters, magnifiers, low cost laser pointers, LED flashlights, magnets, and cell phones. Technologies and/or materials submitted for consideration will be reviewed for inherent and relative effectiveness as a security feature, and may be further assessed for compatibility with design and production factors, durability, environmental acceptability, and other processing requirements. The Bureau will only consider technologies, materials, and detection systems for which at least laboratory feasibility has already been demonstrated (i.e. concept proven, lab prototypes or samples available). For initial screening purposes, interested parties are requested to submit: 1. preliminary samples and 2. a brief technical description to: Bureau of Engraving & Printing Office of Acquisitions Attn: Fredrick Watson 14th and C Streets, SW Washington, D.C. 20228-0001 The Bureau may submit offered technologies to outside technical experts under government contracts for their evaluation subject to the approval of the submitting party. Previously submitted materials or technologies need not be resubmitted. If you have any questions please contact Fredrick Watson via e-mail at Fredrick.Watson@bep.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/TREAS/BEP/OPDC20220/BEP-RFI-16-0330/listing.html)
- Place of Performance
- Address: Bureau of Engraving and Printing, 14th & C Streets, SW, Washington, District of Columbia, 20228, United States
- Zip Code: 20228
- Zip Code: 20228
- Record
- SN04153077-W 20160618/160616235424-27f743c08ee4275c1f0298f8ee234dcf (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |