SOLICITATION NOTICE
Z -- REPAIR EATONS NECK LIGHTHOUSE
- Notice Date
- 6/28/2016
- Notice Type
- Presolicitation
- NAICS
- 237990
— Other Heavy and Civil Engineering Construction
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer, USCG Civil Engineering Unit Providence, 475 Kilvert Street Suite 100, Warwick, Rhode Island, 02886-1379, United States
- ZIP Code
- 02886-1379
- Solicitation Number
- HSCGG1-16-R-PRV194
- Point of Contact
- Susan Hetrick, Phone: 4017361763, Jean M Bretz, Phone: (401)736-1765
- E-Mail Address
-
susan.hetrick@uscg.mil, JEAN.M.BRETZ@USCG.MIL
(susan.hetrick@uscg.mil, JEAN.M.BRETZ@USCG.MIL)
- Small Business Set-Aside
- Total Small Business
- Description
- HSCGG1-16-R-PRV194 ISSUE DATE: 28 June 2016 Contractor shall furnish all labor, material, equipment, transportation, disposal, supervision, and incidental related work necessary to Repair Eatons Neck Lighthouse, USCG ANT Long Island Sound, Northport, NY (Suffolk County). The project includes the following tasks: • Interior repairs at the vestibule, including plaster and gypsum board patching, painting and new vinyl composition tile. • New asphalt shingle roofing, self-adhering bituminous membrane and underlayment at vestibule. Replace existing conduits and weatherheads. • Paint wood trim and exterior door, replace wood fascias and soffits, and repoint brickwork at vestibule. • Provide a new hollow metal door and frame from vestibule to tower • Remove vegetation from tower base • Remove rust. Prime and paint interior cast iron surfaces, including decks, landings, spiral stairs, hatches, ladder, lantern framing, railings, and other exposed iron surfaces. Remove paint from copper surfaces; prime and paint. Protect Fresnel lens during the work; do not paint bronze lens mount. • Remove rust. Prime and paint exterior cast iron surfaces, including decks, landings, ladder, landing, railings, cast iron watch deck panels, cast iron cornice, and other exposed iron surfaces. Remove paint from exterior bronze and copper surfaces; prime and paint. • Clean interior exposed masonry, and coat with mineral silicate coating. • Patch existing damaged brownstone with Jahn M70 mortar where indicated on elevations. Average stone face size is 13" high x 27" long; some vary. • Patch an additional 100 square feet (surface area) of existing damaged brownstone with Jahn M70 mortar. Locations will be determined by the contracting officer's representative. • Repoint cracks in mortar joints where indicated. Repoint 400 linear feet of deteriorated mortar joints; exact locations will be determined by the contracting officer's representative. • After repointing and stone repair is complete, coat exterior stone and brick at tower with mineral silicate coating. • Repair (5) cast iron windows. Remove rust, repair hardware, replace broken components and reglaze. Windows shall be made operable and shall be capable of closing securely, with no gaps or daylight visible between framing members. Prime and paint windows. Windows date from 1858 and 1868, and are believed to be imported from France; all replacement parts shall be custom fabricated for each window. No off-the-shelf-parts are available. • At lantern, temporarily remove copper vent ball, disconnect grounding cable and protect opening from rain/weather penetration. Provide new copper lightning rod, threaded stainless steel tension rod, and nut. Repair top of vent ball and base. Reinstall vent ball and reattach grounding cable to new lightning rod. • Provide new stainless steel door at watch deck; reproduce features of existing door. Prime and paint new door. • Remove rusted iron lintel assembly above window below cornice. Provide new stainless steel lintels. Paint new lintels. Repair masonry adjacent to lintels. • Repair cast iron cornice with Belzona plastic metal. Cut/chip out damaged areas, and remove rust before applying compound. • Repair pitted/eroded cast iron with Belzona plastic metal at various locations (9 square feet of surface area). Cut/chip out damaged areas, and remove rust before applying compound. Exact locations shall be approved by the contracting officer's representative. • Provide (6) new bronze astragals where existing astragals are bent. Exact locations shall be approved by the contracting officer's representative. • Remove existing lantern glazing and reglaze (20) 1/4" thick glass panes. Existing lantern is a decagon. Glazing is held in place by bronze astragals, which serve as glazing bars. The above list is an outline of the work only and not intended to be a substitute for the detailed requirements of the drawings and specifications. This acquisition is issued pursuant to FAR Part 15 and is a best value procurement utilizing the tradeoff process. Evaluation factors will include price, past performance, and technical experience on similar projects. The anticipated construction performance period is 165 calendar days after the Notice to Proceed is issued. The estimated cost range of this project is between $250,000 and $500,000. Bid, payment, and performance bonds will be required if the contract price exceeds $150,000. The applicable North American Industry Classification System (NAICS) code is 237990, Other Heavy and Civil Engineering Construction with a small business size standard of $36.5M. Solicitation packages will be available on or about 18 July 2016. The tentative date set for receipt of proposals is 22 August 2016 at 4:00 PM EST. In accordance with FAR Part 19.5, Small Business set-aside procedures, this solicitation is 100% set-aside for Small Business concerns. Our office no longer issues solicitations or amendments in paper form. All relevant solicitation documents, including specifications and drawings may be accessed for download beginning on the date of issue at the following site http://www.fbo.gov. In order to receive immediate notification of all changes posted electronically, vendors should click on [Register to Receive Notification]. All vendors interested in teaming or subcontracting for this solicitation, should click on [Register as Interested Vendor]. In order to view a Bidders List, interested parties should click on [View List of Interested Vendors]. A bidders list is only available by registering electronically for this solicitation. Vendors MUST be registered in the System for Award Management database through www.SAM.gov in order to receive a federal government contract.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/USCGCEUP/HSCGG1-16-R-PRV194/listing.html)
- Place of Performance
- Address: Lighthouse Road, Northport, New York, 11768, United States
- Zip Code: 11768
- Zip Code: 11768
- Record
- SN04165399-W 20160630/160628235612-e55002472e1e551589a430c7a37c1f5a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |