SOLICITATION NOTICE
66 -- x-ray imager - Specs
- Notice Date
- 6/29/2016
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333999
— All Other Miscellaneous General Purpose Machinery Manufacturing
- Contracting Office
- Department of Energy, SLAC National Accelerator Lab, SLAC National Accelerator Lab, 2575 Sand Hill Road, Menlo Park, California, 94303, United States
- ZIP Code
- 94303
- Solicitation Number
- SLAC-267404
- Archive Date
- 7/29/2016
- Point of Contact
- Katherine A. Coh, Phone: 6509262770
- E-Mail Address
-
kcoh@slac.stanford.edu
(kcoh@slac.stanford.edu)
- Small Business Set-Aside
- N/A
- Description
- SLAC M365 Terms and Conditions US based company Reps and Certs International Reps and Certs Specs for x-ray imager "SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions." SLAC has a requirement for a charge-integrating x-ray detector system for imaging experiments at LCLS. The pixel size shall be between about 50 and 100 um. The pixel noise shall be around 100 electrons or below for single photon identification and sub-pixel position reconstruction into the tender x-ray range. The maximum signal shall be at least 10^4 8keV photons. The quantum efficiency of the sensor shall be high (>90%) over the range 2-20 keV and the system noise should be below the Poisson limit from photon statistics throughout that range. The camera must be linear to 1% over the range. The camera shall read out at over 1kHz. The individual sensor elements shall provide about 0.5Mpixels in a single monolithic sensor. The camera system shall be vacuum compatible to 10-6 Torr. It must use a cable harness and fibers consistent with a small flange. It must support standard cooling methods. The overall camera dimensions should be compact and not exceed 100mm in depth. Precise camera mounting support should be provided, and support for insertable filters is desirable. Provide a price and lead time quotation with signed Representations and Certifications by no later than July 14, 2016. Source selection will be based on lowest price technically acceptable method. Payment terms: Net 30 FOB: Destination The resultign purchase order will be issued on a firm fixed price basis. SLAC National Accelerator Laboratory Terms & Conditions for Commercial Supplies and Services under $100,000 M365 (Rev 17Feb2015) will be made a part of the resulting order.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/SLAC/STAN/SLAC-267404/listing.html)
- Place of Performance
- Address: SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, California, 94025, United States
- Zip Code: 94025
- Zip Code: 94025
- Record
- SN04166116-W 20160701/160629235010-3cac00c6f6648972261966f2480d7fdf (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |