SOLICITATION NOTICE
41 -- HVAC Parts for Whiskeytown National Recreation Area
- Notice Date
- 7/15/2016
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- PO Box 188, Whiskeytown, CA 96095
- ZIP Code
- 96095
- Solicitation Number
- 0040277963
- Response Due
- 7/19/2016
- Archive Date
- 1/15/2017
- Point of Contact
- Name: Client Services, Title: Sourcing Agent, Phone: 1.877.9FEDBID, Fax: 703.442.7822
- E-Mail Address
-
clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0040277963 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-89. The associated North American Industrial Classification System (NAICS) code for this procurement is 334512 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-07-19 13:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Whiskeytown, CA 96095 The DOI NPS PWR PORE MABO requires the following items, Brand Name or Equal, to the following: LI 001: Part number: GPG1648100M41, GOODMAN, PKG (LP) GAS HEAT / AC UNIT 16 SEER 4 TON, 2, EA; LI 002: Part Number: GMVM971205DN, GOODMAN, GAS FURNACE 97% EFF 120,000 BTU, 3, EA; LI 003: Part Number: GCVM970803BN, GOODMAN, GAS FURNACE 97% EFF 80,000 BTU, 1, EA; LI 004: Part Number: DSXC180601, GOODMAN, AC CONDENSING UNIT 18 SEER 5 TON, 3, EA; LI 005: Part Number: DSXC180361, GOODMAN, AC CONDENSING UNIT 18 SEER 3 TON, 1, EA; LI 006: Part Number: CAPT4961D4, GOODMAN, AC EVAP COIL W/TXV 4-5 TON, 3, EA; LI 007: Part Number: CAPF3636B6, GOODMAN,AC EVAP COIL 3 TON, 1, EA; LI 008: Part Number: TX3N4, GOODMAN, TXV VALVE, 1, EA; LI 009: Part Number: LPM-09, GOODMAN, PROPANE CONVERSION KIT, 4, EA; LI 010: Part Number: 100349, LINE SET 35? 3/8, 7/8 ? INSUL ?, 3, EA; LI 011: Part Number: 100441, LINE SET 50? 3/8, 7/8 ? INSUL ?, 1, EA; LI 012: Part Number: THX9421R5021WG, HONEYWELL, THERMOSTAT, 6, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DOI NPS PWR PORE MABO intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOI NPS PWR PORE MABO is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) in order to be considered for award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. 25.001 General. (a) 41 U.S.C. chapter 83, Buy American? (1) Restricts the purchase of supplies, that are not domestic end products, for use within the United States. A foreign end product may be purchased if the contracting officer determines that the price of the lowest domestic offer is unreasonable or if another exception applies (see Subpart 25.1); and (2) Requires, with some exceptions, the use of only domestic construction materials in contracts for construction in the United States (see Subpart 25.2). (b) The restrictions in the Buy American statute are not applicable in acquisitions subject to certain trade agreements (see Subpart 25.4). In these acquisitions, end products and construction materials from certain countries receive nondiscriminatory treatment in evaluation with domestic offers. Generally, the dollar value of the acquisition determines which of the trade agreements applies. Exceptions to the applicability of the trade agreements are described in Subpart 25.4. (c) The test to determine the country of origin for an end product under the Buy American statute (see the various country ?end product? definitions in 25.003) is different from the test to determine the country of origin for an end product under the trade agreements, or the criteria for the representation on end products manufactured outside the United States (see 52.225-18). (1) The Buy American statute uses a two-part test to define a ?domestic end product?or ?domestic construction material? (manufactured in the United States and a formula based on cost of domestic components). The component test has been waived for acquisition of commercially available off-the-shelf items. (2) Under the trade agreements, the test to determine country of origin is ?substantial transformation? (i.e., transforming an article into a new and different article of commerce, with a name, character, or use distinct from the original article). (3) For the representation at 52.225-18, the only criterion is whether the place of manufacture of an end product is in the United States or outside the United States, without regard to the origin of the components. (4) When using funds appropriated under the American Recovery and Reinvestment Act of 2009 (Pub. L. 111-5), the definition of ?domestic manufactured construction material? requires manufacture in the United States but does not include a requirement with regard to the origin of the components. If the construction material consists wholly or predominantly of iron or steel, the iron or steel must be produced in the United States.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOI/NPS/APC-IS/0040277963/listing.html)
- Place of Performance
- Address: Whiskeytown, CA 96095
- Zip Code: 96095
- Zip Code: 96095
- Record
- SN04184650-W 20160717/160715234633-279a064489a9e683e47a0bf468844da5 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |