SOLICITATION NOTICE
36 -- Aluminum Chip Briquetting Machine
- Notice Date
- 7/28/2016
- Notice Type
- Presolicitation
- NAICS
- 333519
— Rolling Mill and Other Metalworking Machinery Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, ACC - APG (W25G1V) Tobyhanna, 11 HAP ARNOLD BLVD, TOBYHANNA ARMY DEPOT, Pennsylvania, 18466-5107, United States
- ZIP Code
- 18466-5107
- Solicitation Number
- W25G1V16R0036
- Point of Contact
- David K. Kern, Phone: 5706158733
- E-Mail Address
-
david.k.kern2.civ@mail.mil
(david.k.kern2.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- This requirement is for the turnkey design, supply, delivery, assembly installation and training for a brand name or equivalent, Prab Dualpak Briquetter machine for aluminum, Model MX20-15M, Prab, Inc, 5944 East N Avenue, Kalamazoo, MI 49048; phone (800) 968-7722, at Tobyhanna Army Depot (TYAD), Tobyhanna, PA 18466. The Contractor shall supply all materials, supplies, freight, delivery, tools, equipment, consumables, labor and supervision for the turn-key design, supply, site preparation, delivery, installation, cleaning, assembly, setup and training for the briquetter. The machine shall meet or exceed all applicable industrial, federal, state and local standards and codes. The Contractor shall supply only a new briquetting machine and new associated equipment. A used and refurbished machine and used and refurbished equipment are unacceptable and will not be considered. All repair and replacement parts for the briquetter and associated equipment shall be new. The Contractor shall be responsible to connect all utilities to the machine and to all ancillary pieces of equipment. The Contractor shall connect the machine to all ancillary pieces of equipment. Utilities will be provided by TYAD to within 20 feet of the machine. The briquetting machine shall utilize 480V/3 Phase/60 Hz. For a briquetting machine that is not designed and constructed to use 480V/3 Phase/60 Hz, the Contractor shall supply, install and connect the necessary transformer that permits the machine to fully utilize 480V/3 Phase/60 Hz. The Contractor shall ensure a minimum of three feet of clearance around the installed equipment, electrical assemblies, subassemblies, and wiring. The Contractor shall provide a maximum of 8 hours of machine operation training for Machining Branch personnel at TYAD. Training shall be conducted by the Contractor's qualified training representative. This training shall focus on basic machine operation and features familiarization. Instruction shall also include maintenance that needs to be performed by machine operators on a daily basis. Training shall be conducted on-site at the machine at TYAD. Machine operator instruction shall be for up to 8 ea. machine operator personnel. All materials used during training shall become the property of TYAD. The Contractor shall provide a maximum of 8 hours of maintenance training for Equipment Maintenance Branch personnel. Training shall be conducted by the Contractor's qualified training and English speaking representative. Maintenance training shall include Preventive Maintenance (PM) and general machine maintenance including the lock-out/tag-out procedure to take the machine to zero mechanical state and restore it to full operational capability. Maintenance instruction shall be for up to three ea. maintenance personnel and shall be performed on-site at the machine at TYAD. All materials used during training shall become the property of TYAD. All deliverables are F.O.B. Destination with inspection and acceptance at destination, TYAD, Tobyhanna, PA 18466. Completion of all contract requirements will be 270 days after award. The machine shall include a one (1) year warranty. The items under this solicitation are subject to the Free Trade Agreements. Defense Federal Acquisition Regulation 252.225-7036 - Buy American Act - Free Trade Agreements applies to this acquisition. DFAR 252.225-7001 - Buy American Act and Balance of Payments Program, will be included in the solicitation. A site visit will be held after issuance of the solicitation. Dates of the site visit will be established in the solicitation. It is strongly recommended that prospective offerors attend a site visit prior to submitting a proposal. The site visit will give offerors the opportunity to consider the layout and floor space of the system within the installation area. This acquisition is being conducted under full and open competition. NAICS code is 333519, Size Standard is 500 employees. This acquisition will be pursued in accordance with FAR Part 12 Acquisition of Commercial Items and FAR Part 13.5 Test Program for Certain Commercial Items. The solicitation Request for Proposal (RFP) W25G1V-16-R-0036 will be issued on or about August 10, 2016. Actual issue and due dates shall be as established in the solicitation. The RFP will be available for download on the FEDERAL BUSINESS OPPORTUNITIES PAGE. Vendors wishing an electronic copy may download the RFP on or after the issue date at the following internet address: https://www.fbo.gov/. At Keyword/Solicitation Number, insert W25G1V-16-R-0036 and click SEARCH. The solicitation will be issued electronically only. No paper or disc copies will be issued. It is incumbent upon interested sources to periodically access the internet site through closing to obtain any amendments which may be issued. All amendments must be acknowledged in the proposal. All proposals submitted shall require a technical proposal describing the Contractor's proposed equipment and capability to provide the requirements of the solicitation and statement of work. In addition, recent and relevant past performance for same or similar requirements which demonstrate capability and successful performance on previous contracts will be required with proposal submitted. Any resultant contract shall be Firm Fixed-Price, one (1) award. In order to be eligible for an award, all prospective offerors must be actively registered in System for Award Management (SAM), be found to be responsible in accordance with FAR 9.1 - Responsibility of Prospective Contractors and have no delinquent Federal debt. Point of contact is David Kern, Contract Specialist, david.k.kern2.civ@mail.mil, (570) 615-8733. This notice does not obligate the Government to award a contract.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/d9aaec5c7ad5fd4ec6f3842507822b39)
- Place of Performance
- Address: Tobyhanna Army Depot, 11 Hap Arnold Boulevard, Tobyhanna, Pennsylvania, 18466, United States
- Zip Code: 18466
- Zip Code: 18466
- Record
- SN04199744-W 20160730/160728234811-d9aaec5c7ad5fd4ec6f3842507822b39 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |