SOLICITATION NOTICE
29 -- Keel Coolers
- Notice Date
- 8/4/2016
- Notice Type
- Presolicitation
- NAICS
- 332410
— Power Boiler and Heat Exchanger Manufacturing
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, St. Paul, Attn: CEMVP-CT, 180 East Fifth Street, St. Paul, Minnesota, 55101-1678, United States
- ZIP Code
- 55101-1678
- Solicitation Number
- W912ES-16-T-0123
- Archive Date
- 9/7/2016
- Point of Contact
- Terry Zenker, Phone: 6512905407, Shamron Richardson, Phone: 651-290-5415
- E-Mail Address
-
terry.g.zenker@usace.army.mil, Shamron.J.Richardson@usace.army.mil
(terry.g.zenker@usace.army.mil, Shamron.J.Richardson@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Provide two new keel coolers for the Quarters Barge Taggatz. The provided coolers shall be a Fernstrum model DD16147W-ZE1S2 or equal. "Or equal" makes/models shall meet the minimum salient characteristics listed below. The Dredge Goetz fleet will be on dry dock for the winter at Ensley Engineering Yard, located in Memphis, Tennessee, where the engineers from the Dredge Goetz will perform the installation of the keel coolers. Minimum salient characteristics: Provide to the Government with a quantity of two, double pass keel cooler heat exchangers, one per generator set, that will provide sufficient heat exchange to cool two Generator engines @ 100% load @ 0 (zero) knots, maximum sea water temp of 90 degrees. Generator Specifications Caterpillar C9.3 engine, 300KW @ 1800RPM with a cooling water flow rate of 73.3 GPM, heat rejection to coolant 17,518 BTU/minute combined. The supplied keel cooler shall be of sufficient size to cool the combined circuit of the engine water jacket and the aftercooler circuits. Due to the cooler pocket size the maximum acceptable physical size of the cooler shall not exceed 16" in height and 158" in length with mounting brackets not to exceed 21". The projection from hull shall not exceed 10" including inlet and outlet flanges. The vendor is required to include delivery in their quote. The coolers shall be packed for shipment in a way to best protect the coolers from damage during shipment. Delivery date of the keel coolers shall be no later than 30 September 2016. Hours for delivery and pick-up must be between 7:00 AM and 3:30 PM. No deliveries will be received on holidays or weekends. Government personnel will be available to unload keel coolers from delivery truck during hours of operation.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA37/W912ES-16-T-0123/listing.html)
- Place of Performance
- Address: Ensley Engineer Yard, Marine Maintenance Center, 2915 Riverport Road, Memphis, Tennessee, 38109, United States
- Zip Code: 38109
- Zip Code: 38109
- Record
- SN04210613-W 20160806/160804235954-a3cc54060ac4c058cff15c33558a1e04 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |