FBODaily.com | FedBizOpps: PRESOL | J | Directional Spectral Wave Generator (DSWG)

FBO DAILY - FEDBIZOPPS ISSUE OF AUGUST 14, 2016 FBO #5378
SOLICITATION NOTICE

J -- Directional Spectral Wave Generator (DSWG)

Notice Date: 8/12/2016
Notice Type: Combined Synopsis/Solicitation
NAICS: 811219 — Other Electronic and Precision Equipment Repair and Maintenance
Contracting Office: Department of the Army, U.S. Army Corps of Engineers, USACE ITL, GSL, EL, CHL, Vicksburg, 3909 Halls Ferry Road, VICKSBURG, Mississippi, 39180-6199, United States
ZIP Code: 39180-6199
Solicitation Number: W81EWF62017056
Archive Date: 12/30/2016
Point of Contact: Stacy D. Thurman, Phone: 6016343198
E-Mail Address: stacy.d.thurman@usace.army.mil
(stacy.d.thurman@usace.army.mil)
Small Business Set-Aside: N/A
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Competitive quotes are being requested under W81EWF62017056. The associated North American Industry Classification System (NACIS) code for the procurement is 811219 (Other Electronic & Precision Equipment Repair & Maintenance) and the Small Business size standard is $20.5 million. The US Army Corps of Engineers, Engineer Research and Development Center has a requirement for Directional Spectral Wave Generator (DSWG) repairs. In order to receive an award, all contractors must be registered in the System for Award Management under above NAICS code. This procurement is Unrestricted. &emsp; Performance Work Statement DSWG Repairs W81EWF62017056 1.0 Introduction The Harbors, Entrances and Structures Branch (HES) of the Coastal and Hydraulics Laboratory (CHL) maintains and operates extensive laboratory facilities used for designing and testing coastal structures. The Directional Spectral Wave Generator (DSWG) provides realistic three-dimensional waves in a laboratory environment for coastal projects that support coastal research and development and site-specific project studies. The DSWG is in need of repair and maintenance. 2.0 Project POCs: Glenn Myrick, Technical POC, COR, ERDC-CHL Glenn.B.Myrick@usace.army.mil 601-634-4276 David Daily, ISD Technical Support, ERDC-ITL David.S.Daily@usace.army.mil 601-634-2577 Robbie Beard, Contracting Officer Robbie.Beard@usace.army.mil 601-634-3296 Kym Chambers, Financial POC, ERDC-CHL Kymmeria.L.Chambers@usace.army.mil 601-634-3089 3.0 Task Descriptions. Specific tasks to be accomplished are listed below: Task 1. Travel to ERDC and evaluate all amplifiers, motors, and communication cables. The machine requires 61 of each and an additional 6 each amplifier and motors will be evaluated to be used as backup replacement parts. Specifically: • 65 Servo amps 100 % tested to insure all amplifiers are functioning properly. • 65 Servo motors to be tested on site. • Ensure 61 fiber optic cable sets between each amp and each cabinet are working properly. • Evaluation fees will be waived for each amp or servo where a repair is necessary Product: Repairs to be identified. Duration: 3-4 days. Task 2. Repair, rebuild, or replace: • Repair or rebuild up to 20 amplifiers. Amplifiers will be sent for repair if needed. Contractor will supply all packaging and shipping. • Repair or rebuild up to 20 servo motors. Motors will be repaired onsite. All 61 servo motors will be removed by ERDC, but remounted by contractor. • Fiber optic cables that are not the correct length or not functioning during amplifier tests must be replaced. All cables will be secured to minimize future damage and/or malfunction of cable. • Spare/replacement parts for amp and motor repair will be supplied by the contractor. • Package and ship up to 30 amps for repair • Install up to 30 new and/or repaired amps and set up amps on site Product: Refurbished DSWG. Duration: 3-4 days, plus shipment and repair of amps Task 3. Test wave generator to ensure repairs have resulted in a fully functional DSWG. Product: Operational DSWG. Duration: 1 day Options: ERDC will exercise the following options based on the results of tasks 1, 2, and 3 above and available funding: Option 1: Repair or rebuild, install and test of 10 additional amplifiers Option 2: Repair or rebuild, install and test of 10 additional servo motors Option 3: Repair or rebuild, install and test of 10 additional amplifiers Option 4: Repair or rebuild, install and test of 3 additional amplifiers 4.0 Schedule Work activities for the base (tasks 1-3) SHALL be completed no later than 30 Sep 2016. The Government reserves the right to award one or more of the Option items shown on the bid schedule. Any Option Item(s) awarded SHALL be completed NLT 31 October 2016. Warranty shall last a minimum of one calendar year. Offerors shall include a price for all items for the Base Contract and Options. 5.0 Work Location The DSWG is located at: USACE Engineer Research and Development Center Coastal and Hydraulics Laboratory, Building 6006 3909 Halls Ferry Rd Vicksburg, MS 3918 &emsp; 6.0 Wage Determination The following Wage Determination is applicable to this procurement. WD 15-5173 (Rev.-3) was first posted on www.wdol.gov on 06/21/2016 ************************************************************************************ REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION By direction of the Secretary of Labor | WAGE AND HOUR DIVISION | WASHINGTON D.C. 20210 | | | | Wage Determination No.: 2015-5173 Daniel W. Simms Division of | Revision No.: 3 Director Wage Determinations| Date Of Revision: 06/15/2016 _______________________________________|____________________________________________ Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.15 for calendar year 2016 applies to all contracts subject to the Service Contract Act for which the solicitation was issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.15 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2016. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts. ____________________________________________________________________________________ State: Mississippi Area: Mississippi Counties of Adams, Amite, Claiborne, Covington, Franklin, Issaquena, Jefferson, Jefferson Davis, Lawrence, Lincoln, Marion, Pike, Sharkey, Walthall, Warren, Wilkinson, Yazoo ____________________________________________________________________________________ **Fringe Benefits Required Follow the Occupational Listing** OCCUPATION CODE - TITLE FOOTNOTE RATE 01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 13.16 01012 - Accounting Clerk II 14.77 01013 - Accounting Clerk III 16.68 01020 - Administrative Assistant 19.90 01035 - Court Reporter 17.17 01041 - Customer Service Representative I 11.10 01042 - Customer Service Representative II 12.49 01043 - Customer Service Representative III 13.62 01051 - Data Entry Operator I 11.23 01052 - Data Entry Operator II 12.26 01060 - Dispatcher, Motor Vehicle 17.52 01070 - Document Preparation Clerk 11.65 01090 - Duplicating Machine Operator 11.65 01111 - General Clerk I 10.84 01112 - General Clerk II 11.83 01113 - General Clerk III 13.28 01120 - Housing Referral Assistant 16.76 01141 - Messenger Courier 9.49 01191 - Order Clerk I 11.73 01192 - Order Clerk II 13.84 01261 - Personnel Assistant (Employment) I 14.80 01262 - Personnel Assistant (Employment) II 16.56 01263 - Personnel Assistant (Employment) III 18.47 01270 - Production Control Clerk 19.93 01290 - Rental Clerk 12.00 01300 - Scheduler, Maintenance 13.07 01311 - Secretary I 13.07 01312 - Secretary II 14.64 01313 - Secretary III 16.76 01320 - Service Order Dispatcher 15.36 01410 - Supply Technician 19.90 01420 - Survey Worker 12.43 01460 - Switchboard Operator/Receptionist 11.96 01531 - Travel Clerk I 11.43 01532 - Travel Clerk II 12.05 01533 - Travel Clerk III 12.66 01611 - Word Processor I 12.29 01612 - Word Processor II 13.79 01613 - Word Processor III 15.43 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 18.56 05010 - Automotive Electrician 17.13 05040 - Automotive Glass Installer 16.21 05070 - Automotive Worker 16.21 05110 - Mobile Equipment Servicer 14.24 05130 - Motor Equipment Metal Mechanic 18.03 05160 - Motor Equipment Metal Worker 16.21 05190 - Motor Vehicle Mechanic 17.35 05220 - Motor Vehicle Mechanic Helper 13.16 05250 - Motor Vehicle Upholstery Worker 15.14 05280 - Motor Vehicle Wrecker 16.21 05310 - Painter, Automotive 17.13 05340 - Radiator Repair Specialist 16.21 05370 - Tire Repairer 12.92 05400 - Transmission Repair Specialist 18.03 07000 - Food Preparation And Service Occupations 07010 - Baker 10.90 07041 - Cook I 8.61 07042 - Cook II 10.14 07070 - Dishwasher 8.28 07130 - Food Service Worker 8.44 07210 - Meat Cutter 12.48 07260 - Waiter/Waitress 8.32 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 17.04 09040 - Furniture Handler 9.97 09080 - Furniture Refinisher 17.04 09090 - Furniture Refinisher Helper 12.39 09110 - Furniture Repairer, Minor 14.81 09130 - Upholsterer 17.04 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 9.42 11060 - Elevator Operator 9.42 11090 - Gardener 14.95 11122 - Housekeeping Aide 9.55 11150 - Janitor 9.55 11210 - Laborer, Grounds Maintenance 10.19 11240 - Maid or Houseman 8.29 11260 - Pruner 8.96 11270 - Tractor Operator 13.53 11330 - Trail Maintenance Worker 10.19 11360 - Window Cleaner 10.85 12000 - Health Occupations 12010 - Ambulance Driver 13.24 12011 - Breath Alcohol Technician 17.03 12012 - Certified Occupational Therapist Assistant 20.71 12015 - Certified Physical Therapist Assistant 18.74 12020 - Dental Assistant 15.24 12025 - Dental Hygienist 30.04 12030 - EKG Technician 21.41 12035 - Electroneurodiagnostic Technologist 21.41 12040 - Emergency Medical Technician 13.24 12071 - Licensed Practical Nurse I 15.22 12072 - Licensed Practical Nurse II 17.03 12073 - Licensed Practical Nurse III 17.99 12100 - Medical Assistant 12.52 12130 - Medical Laboratory Technician 15.86 12160 - Medical Record Clerk 12.68 12190 - Medical Record Technician 14.18 12195 - Medical Transcriptionist 15.22 12210 - Nuclear Medicine Technologist 32.69 12221 - Nursing Assistant I 9.99 12222 - Nursing Assistant II 11.24 12223 - Nursing Assistant III 12.27 12224 - Nursing Assistant IV 13.77 12235 - Optical Dispenser 15.92 12236 - Optical Technician 15.22 12250 - Pharmacy Technician 13.41 12280 - Phlebotomist 13.84 12305 - Radiologic Technologist 22.41 12311 - Registered Nurse I 23.01 12312 - Registered Nurse II 28.15 12313 - Registered Nurse II, Specialist 28.15 12314 - Registered Nurse III 34.05 12315 - Registered Nurse III, Anesthetist 34.05 12316 - Registered Nurse IV 40.81 12317 - Scheduler (Drug and Alcohol Testing) 20.01 12320 - Substance Abuse Treatment Counselor 12.59 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 15.97 13012 - Exhibits Specialist II 19.79 13013 - Exhibits Specialist III 23.91 13041 - Illustrator I 15.97 13042 - Illustrator II 19.79 13043 - Illustrator III 23.91 13047 - Librarian 21.91 13050 - Library Aide/Clerk 10.39 13054 - Library Information Technology Systems 19.79 Administrator 13058 - Library Technician 12.56 13061 - Media Specialist I 14.28 13062 - Media Specialist II 15.97 13063 - Media Specialist III 17.81 13071 - Photographer I 14.50 13072 - Photographer II 16.21 13073 - Photographer III 20.10 13074 - Photographer IV 24.59 13075 - Photographer V 29.73 13090 - Technical Order Library Clerk 13.05 13110 - Video Teleconference Technician 16.44 14000 - Information Technology Occupations 14041 - Computer Operator I 16.58 14042 - Computer Operator II 18.55 14043 - Computer Operator III 21.14 14044 - Computer Operator IV 27.01 14045 - Computer Operator V 27.20 14071 - Computer Programmer I (see 1) 20.08 14072 - Computer Programmer II (see 1) 24.87 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 16.58 14160 - Personal Computer Support Technician 27.01 14170 - System Support Specialist 21.50 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 28.72 15020 - Aircrew Training Devices Instructor (Rated) 34.74 15030 - Air Crew Training Devices Instructor (Pilot) 41.64 15050 - Computer Based Training Specialist / Instructor 28.72 15060 - Educational Technologist 24.19 15070 - Flight Instructor (Pilot) 41.64 15080 - Graphic Artist 20.31 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 38.19 15086 - Maintenance Test Pilot, Rotary Wing 38.19 15088 - Non-Maintenance Test/Co-Pilot 38.19 15090 - Technical Instructor 20.13 15095 - Technical Instructor/Course Developer 24.61 15110 - Test Proctor 16.27 15120 - Tutor 16.27 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 8.29 16030 - Counter Attendant 8.29 16040 - Dry Cleaner 9.67 16070 - Finisher, Flatwork, Machine 8.29 16090 - Presser, Hand 8.29 16110 - Presser, Machine, Drycleaning 8.29 16130 - Presser, Machine, Shirts 8.29 16160 - Presser, Machine, Wearing Apparel, Laundry 8.29 16190 - Sewing Machine Operator 10.15 16220 - Tailor 10.63 16250 - Washer, Machine 8.74 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 20.39 19040 - Tool And Die Maker 24.71 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 12.59 21030 - Material Coordinator 19.93 21040 - Material Expediter 19.93 21050 - Material Handling Laborer 11.88 21071 - Order Filler 11.27 21080 - Production Line Worker (Food Processing) 12.59 21110 - Shipping Packer 13.74 21130 - Shipping/Receiving Clerk 13.74 21140 - Store Worker I 9.70 21150 - Stock Clerk 14.34 21210 - Tools And Parts Attendant 13.37 21410 - Warehouse Specialist 12.59 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 21.06 23019 - Aircraft Logs and Records Technician 16.78 23021 - Aircraft Mechanic I 19.98 23022 - Aircraft Mechanic II 21.06 23023 - Aircraft Mechanic III 22.06 23040 - Aircraft Mechanic Helper 14.58 23050 - Aircraft, Painter 18.15 23060 - Aircraft Servicer 16.78 23070 - Aircraft Survival Flight Equipment Technician 18.15 23080 - Aircraft Worker 17.98 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 17.98 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 19.98 II 23110 - Appliance Mechanic 17.58 23120 - Bicycle Repairer 13.55 23125 - Cable Splicer 21.97 23130 - Carpenter, Maintenance 15.70 23140 - Carpet Layer 16.02 23160 - Electrician, Maintenance 22.67 23181 - Electronics Technician Maintenance I 16.91 23182 - Electronics Technician Maintenance II 17.78 23183 - Electronics Technician Maintenance III 18.75 23260 - Fabric Worker 14.81 23290 - Fire Alarm System Mechanic 17.75 23310 - Fire Extinguisher Repairer 13.61 23311 - Fuel Distribution System Mechanic 16.59 23312 - Fuel Distribution System Operator 13.99 23370 - General Maintenance Worker 14.93 23380 - Ground Support Equipment Mechanic 19.98 23381 - Ground Support Equipment Servicer 16.78 23382 - Ground Support Equipment Worker 17.98 23391 - Gunsmith I 13.61 23392 - Gunsmith II 16.02 23393 - Gunsmith III 18.17 23410 - Heating, Ventilation And Air-Conditioning 17.93 Mechanic 23411 - Heating, Ventilation And Air Contditioning 18.90 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 19.01 23440 - Heavy Equipment Operator 17.75 23460 - Instrument Mechanic 18.17 23465 - Laboratory/Shelter Mechanic 17.03 23470 - Laborer 11.56 23510 - Locksmith 17.03 23530 - Machinery Maintenance Mechanic 21.48 23550 - Machinist, Maintenance 18.13 23580 - Maintenance Trades Helper 11.84 23591 - Metrology Technician I 18.17 23592 - Metrology Technician II 19.17 23593 - Metrology Technician III 20.08 23640 - Millwright 19.53 23710 - Office Appliance Repairer 19.75 23760 - Painter, Maintenance 15.33 23790 - Pipefitter, Maintenance 17.28 23810 - Plumber, Maintenance 16.19 23820 - Pneudraulic Systems Mechanic 18.17 23850 - Rigger 18.17 23870 - Scale Mechanic 16.02 23890 - Sheet-Metal Worker, Maintenance 16.14 23910 - Small Engine Mechanic 16.02 23931 - Telecommunications Mechanic I 26.70 23932 - Telecommunications Mechanic II 28.02 23950 - Telephone Lineman 18.17 23960 - Welder, Combination, Maintenance 17.75 23965 - Well Driller 18.17 23970 - Woodcraft Worker 18.17 23980 - Woodworker 13.97 24000 - Personal Needs Occupations 24550 - Case Manager 12.47 24570 - Child Care Attendant 8.68 24580 - Child Care Center Clerk 11.19 24610 - Chore Aide 9.91 24620 - Family Readiness And Support Services 12.47 Coordinator 24630 - Homemaker 12.47 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 18.47 25040 - Sewage Plant Operator 16.05 25070 - Stationary Engineer 18.47 25190 - Ventilation Equipment Tender 12.58 25210 - Water Treatment Plant Operator 16.05 27000 - Protective Service Occupations 27004 - Alarm Monitor 12.19 27007 - Baggage Inspector 9.34 27008 - Corrections Officer 13.86 27010 - Court Security Officer 15.34 27030 - Detection Dog Handler 12.03 27040 - Detention Officer 13.86 27070 - Firefighter 16.94 27101 - Guard I 9.34 27102 - Guard II 12.03 27131 - Police Officer I 16.87 27132 - Police Officer II 18.75 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.46 28042 - Carnival Equipment Repairer 14.55 28043 - Carnival Worker 9.92 28210 - Gate Attendant/Gate Tender 13.81 28310 - Lifeguard 11.01 28350 - Park Attendant (Aide) 15.45 28510 - Recreation Aide/Health Facility Attendant 11.28 28515 - Recreation Specialist 16.57 28630 - Sports Official 12.31 28690 - Swimming Pool Operator 18.14 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 16.86 29020 - Hatch Tender 16.86 29030 - Line Handler 16.86 29041 - Stevedore I 15.59 29042 - Stevedore II 17.93 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 36.49 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 25.17 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 27.71 30021 - Archeological Technician I 16.60 30022 - Archeological Technician II 18.28 30023 - Archeological Technician III 22.65 30030 - Cartographic Technician 23.21 30040 - Civil Engineering Technician 18.16 30051 - Cryogenic Technician I 23.66 30052 - Cryogenic Technician II 26.13 30061 - Drafter/CAD Operator I 16.65 30062 - Drafter/CAD Operator II 19.14 30063 - Drafter/CAD Operator III 21.92 30064 - Drafter/CAD Operator IV 25.70 30081 - Engineering Technician I 15.04 30082 - Engineering Technician II 16.88 30083 - Engineering Technician III 18.88 30084 - Engineering Technician IV 23.40 30085 - Engineering Technician V 28.82 30086 - Engineering Technician VI 34.63 30090 - Environmental Technician 23.21 30095 - Evidence Control Specialist 21.36 30210 - Laboratory Technician 20.89 30221 - Latent Fingerprint Technician I 23.66 30222 - Latent Fingerprint Technician II 26.13 30240 - Mathematical Technician 23.21 30361 - Paralegal/Legal Assistant I 18.76 30362 - Paralegal/Legal Assistant II 23.25 30363 - Paralegal/Legal Assistant III 28.44 30364 - Paralegal/Legal Assistant IV 33.85 30375 - Petroleum Supply Specialist 26.13 30390 - Photo-Optics Technician 23.21 30395 - Radiation Control Technician 26.13 30461 - Technical Writer I 22.85 30462 - Technical Writer II 27.94 30463 - Technical Writer III 33.80 30491 - Unexploded Ordnance (UXO) Technician I 23.19 30492 - Unexploded Ordnance (UXO) Technician II 28.06 30493 - Unexploded Ordnance (UXO) Technician III 33.63 30494 - Unexploded (UXO) Safety Escort 23.19 30495 - Unexploded (UXO) Sweep Personnel 23.19 30501 - Weather Forecaster I 23.66 30502 - Weather Forecaster II 28.77 30620 - Weather Observer, Combined Upper Air Or (see 2) 21.92 Surface Programs 30621 - Weather Observer, Senior (see 2) 23.21 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 28.06 31020 - Bus Aide 9.28 31030 - Bus Driver 13.76 31043 - Driver Courier 12.60 31260 - Parking and Lot Attendant 9.40 31290 - Shuttle Bus Driver 13.84 31310 - Taxi Driver 10.24 31361 - Truckdriver, Light 13.84 31362 - Truckdriver, Medium 15.12 31363 - Truckdriver, Heavy 18.54 31364 - Truckdriver, Tractor-Trailer 18.54 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 13.68 99030 - Cashier 8.72 99050 - Desk Clerk 8.61 99095 - Embalmer 22.79 99130 - Flight Follower 23.19 99251 - Laboratory Animal Caretaker I 10.67 99252 - Laboratory Animal Caretaker II 11.72 99260 - Marketing Analyst 17.87 99310 - Mortician 22.79 99410 - Pest Controller 16.93 99510 - Photofinishing Worker 12.19 99710 - Recycling Laborer 12.69 99711 - Recycling Specialist 15.76 99730 - Refuse Collector 11.15 99810 - Sales Clerk 11.98 99820 - School Crossing Guard 10.96 99830 - Survey Party Chief 18.14 99831 - Surveying Aide 13.20 99832 - Surveying Technician 16.49 99840 - Vending Machine Attendant 12.31 99841 - Vending Machine Repairer 15.11 99842 - Vending Machine Repairer Helper 12.31 ____________________________________________________________________________________ ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS: HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 8 years, and 4 weeks after 20 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173) HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174) THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING: 1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541. 400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination. Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of: (1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications; (2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications; (3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or (4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400). 2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am. If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work). ** HAZARDOUS PAY DIFFERENTIAL ** An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges. A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay. ** UNIFORM ALLOWANCE ** If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance: The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs. ** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS ** The duties of employees under job titles listed are those described in the "Service Contract Act Directory of Occupations", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated. ** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE, Standard Form 1444 (SF-1444) ** Conformance Process: The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract, a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.The process for preparing a conformance request is as follows: 1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s). 2) After contract award, the contractor prepares a written report listing in order the proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work. 3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the U.S. Department of Labor, Wage and Hour Division, for review (See 29 CFR 4.6(b)(2)(ii)). 4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request. 5) The contracting officer transmits the Wage and Hour Division's decision to the contractor. 6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)). Information required by the Regulations must be submitted on SF-1444 or bond paper. When preparing a conformance request, the "Service Contract Act Directory of Occupations" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination. Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1)). BID SCHEDULE: Line Item 0001 - Travel to ERDC and Evaluation of all amplifiers, motors, and communication cables (Task 1) Total Amount______________ Line Item 0002 - Materials and Supplies Total Amount_______________ Line Item 0003 - Repair or rebuild up to 20 amplifiers (Task 2) Total Amount________________ Line Item 0004 - Repair or rebuild up to 20 amplifiers (Task 2) Total Amount_________________ Line Item 0005 - Test Generator (Task 3) Total Amount_________________ Line Item 0006 - Option 1: Repair or rebuild, install and test of 10 additional amplifiers Total Amount_________________ Line Item 0007 - Option 2: Repair or rebuild, install and test of 10 additional servo motors Total Amount_________________ Line Item 0008 - Option 3: Repair or rebuild, install and test of 10 additional amplifiers Total Amount_________________ Line Item 0009 - Option 4: Repair or rebuild, install and test of 3 additional amplifiers Total Amount_________________ Base plus all Options tiny_mce_marker________________________&emsp; In accordance with the specifications provided, award shall be made to the responsible offeror whose quote is determined to be the Lowest Price Technically Acceptable. This solicitation document incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-88 (05/16/2016) and Defense Federal Acquisition Regulation Supplement (DFARS), DPN 20160630, (06/30/2016). It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses can be accessed in full text at www.farsite.hill.af.mil. The following apply to this acquisition: 52.203-5 Covenant Against Contingent Fees 52.204-7, System for Award Management Registration (Deviation) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards 52.204-99, System for Award Management Registration (Deviation) 52.209-6, Protecting the Government Interest When Subcontracting with Contractors Debarred, Suspended or Proposed for Debarment 52.219-8, Utilization of Small Business Concerns 52.219-28, Post Award Small Business Program Representation 52.212-1, Instructions to Offerors - Commercial Items 52.212-2, Evaluation Commercial Items 52.212-3 Offeror Representations and Certification - Commercial Items 52.212-4, Contract Terms and Conditions Commercial 52.212-5-Contract Terms and Conditions Required to Implement Statutes or Executive Orders 52.222-3, Convict Labor 52.219-14, Limitations on Subcontracting 52.219-28, Post Award Small Business Program Re-representation 52.222-3, Convict Labor 52.222-19, Child Labor Cooperation with Authorities and Remedies 52.222-21, Prohibition of Segregated Facilities (Feb 1999) 52.222-26, Equal Opportunity 52.222-35, Equal Opportunity Veterans 52.222-36, Affirmative Action for Workers with Disabilities 52.222-40, Notification of Employee Rights Under the National Labor Relation Act 52.222-50, Combating Trafficking in Persons 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving 52.223-1, Biobased Product Certification 52.225-1, Buy American- Supplies 52.225-13, Restrictions on Certain Foreign Purchases 52.232-33, Payment by Electronic Funds Transfer Central Contractor Registration 52.232-40, Providing Accelerated Payments to Small Business Subcontractors 52.233-3, Protest After Award 52.233-4, Applicable Law for Breach of Contract Claim 52.243-1, Changes - Fixed Price 52.252-2, Clauses Incorporated by Reference 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7003, Control of Government Personnel Work Product 252.204-7004 Alt A, System for Award Management 252.204-7008, Compliance with Safeguarding Covered Defense Information Controls 252.209-7001 Disclosure of Ownership or Control by Government of a Terrorist Country 252.204-7011 Alternative Line Item Structure 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting 252.211-7003, Item Unique Identification and Valuation 252.212-7000 Offeror Representations and Certifications--Commercial Items 252.225-7001 Buy American Act and Balance of Payments Program 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7010, Levies on Contract Payments 252.247-7023 Transportation of Supplies by Sea 252.247-7024 Notification of Transportation of Supplies by Sea NOTE: ALL OFFERORS MUST BE REGISTERED IN THE SYSTEM FOR AWARD MANAGEMENT (SAM) BEFORE BEING ELIGIBLE FOR CONSIDERATION FOR AWARD. Information concerning SAM requirements may be viewed via the internet at SAM.gov. Interested parties must include, with their quote, their CAGE code and a completed 52.212-3 Offeror Representations and Certification or state that the offeror has completed Offeror Representations and Certification. Product literature containing specifications for quote product shall be submitted as well. Interested parties may submit quotes for consideration by the Government to stacy.d.thurman@usace.army.mil not later than 23 August 2016 - 11:00 A.M., CST. Oral communications are not acceptable in response to this notice. Please reference W81EWF62017056 in all correspondence. Offerors should check the FedBizOpps website often for new solicitations and/or changes (AMENDMENTS) to existing ones. Contracting Office Address: USACE-ERDC ATTN: CEERD-CT/Stacy Thurman 3909 HALLS FERRY ROAD VICKSBURG, MS 39180-6199 Place of Performance: USACE-ERDC ATTN: CEERD-CHL/Glenn Myrick 3909 HALLS FERRY ROAD VICKSBURG MS 39180-6199 Point of Contact(s): Stacy Thurman, 601634-3198
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/329/W81EWF62017056/listing.html)
Record: SN04221804-W 20160814/160812234821-87b6bfeaef78701e62b98dbc1d134e6b (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

J -- Directional Spectral Wave Generator (DSWG)