Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF AUGUST 26, 2016 FBO #5390
MODIFICATION

73 -- DFAC Equipment

Notice Date
8/24/2016
 
Notice Type
Modification/Amendment
 
Contracting Office
6100 Meloy Drive, Columbus, GA 31905
 
ZIP Code
31905
 
Solicitation Number
0010858711-01
 
Response Due
7/25/2016
 
Archive Date
1/21/2017
 
Point of Contact
Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
 
E-Mail Address
Clientservices@fedbid.com;
 
Small Business Set-Aside
Economically Disadvantaged Woman Owned Small Business
 
Description
CANCELLATION NOTICE:Bids are being solicited under solicitation number 0010858711-01. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 803201_01. GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. If FedBid receives notice that, due to inclusion of the FedBid Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the FedBid Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is an [ Economically Disadvantaged Women-Owned Small Business ] set-aside and only qualified sellers may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-07-25 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be in the Special Shipping Instructions. The MICC Fort Benning requires the following items, Meet or Exceed, to the following: LI 001: Pot Scrubber - Insinger Model No. SMARTSCRUBBER096 Smart Scrubber Pot & Pan Washing System, 96"W x 33"D, 11"H backsplash, includes: (1) 18" soiled drain board, (1)32" washing station, (1) 16" rinse sink, (1) 16" sanitizer sink, (1) 14" clean drain board, smart control panel; pump on/off & wash tank heat on/off (mounted under soiled drain board), (6) high velocity water jets, lever waste drains, support channels & cross rails, adjustable feet, 300 series stainless steel construction, 1- high power pump motor, 16.3amps, 120v/60/1- ph, 1, EA; LI 002: Pass-thru Mobile Heated Cabinet - Metro Model No. C569L; NDS; LPDC C5; 6 Series Heated Holding Cabinet, mobile, full height, pass thru, insulated (1) solid dutch & (1) double pane tempered glass dutch doors, top mount controls & analog thermometer, ducted heating system, thermostat 70 degrees to 200 degrees F temperature, lip load (34) 18" x 26" pan capacity, 3" O.C., 5" casters (two with brakes), aluminum, 120v/60/1 ph, 1440 watts, 12 amps, NEMA 5#15P, UL, CUL, NSF 1 each., 1, EA; LI 003: Refrigerated Cold Food Serving Counter - Color point Model No. 74-CFMPA Refrigerated Cold Food Serving Counter with Tempest Aire refrigeration system, 5 pan model, stainless steel construction, with F stainless steel serving shelf/over shelf, 120 volt 2 each., 2, EA; LI 004: Hot Food Serving Counter - Color point Model No. 5E5-CPA Hot Food Serving Counter, 74" long, 5 pan model, 208 volt, stainless steel construction, to include M. Single Service Buffet Shield, S. Heat Lamp under shield, Z. Hot Food Drains 2 each., 2, EA; LI 005: Convection Oven Southbend Model No. SLGS/22CCH SilverStar Convection Oven, gas, double-deck, cook & hold, standard depth, solid state controls, stainless steel front, top & sides, 60/40 dependent doors, aluminized steel rear, interior light, 6" stainless steel legs, 144,000 BTU, (2) 1/2 HP, CSA, NSF 4 each 4 each 2 year parts & labor, 5 years warranty on doors (parts only, excluding door glass), standard 4 ea Specify Gas Type 4 each Standard power system 4 each (2) 120v/60/1 ph, 7.9 amps, NEMA 5-15P, standard 4 each., 4, EA; LI 006: Delivery will be at Camp Merrill in Dahlonega GA Zip 30533, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Benning intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Benning is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this aquisition. The selected Offeror must comply with the following commercial item terms and conditions: FAR 52.209-5, Certification Regarding Responsibility Matters and FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.225-13, Restriction on Certain Foreign Purchases; and 52.232-33, Payment by Electronic Funds Transfer ? Central Contractor Registration. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 ITEM IDENTIFICATION AND VALUATION (JUN 2005); 252.246-70000 Material Inspection and receiving Report and Army Electronic Invoicing Instructions This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. New equipment ONLY. NO remanufactured or used products. NO "GREY" market items. Bid MUST be valid for 30 calendar days after submission FOB Destination CONUS (CONtinental U.S.) No partial shipments unless otherwise specified. Payment terms shall be net 30 unless otherwise agreed to by MICC Fort Benning. In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under about WAWF. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL Submission of Offers in the English Language The Government will award a contract resulting from this solicitation to the responsible quoter whose quote conforming to the solicitation will be most advantageous to the Government, considering price alone. This subpart prescribes policies, standards, and procedures for determining whether prospective contractors and subcontractors are responsible. As prescribed in 4.1303, insert the following clause: Personal Identity Verification of Contractor Personnel (Jan 2011) (a) The Contractor shall comply with agency personal identity verification procedures identified in the contract that implement Homeland Security Presidential Directive-12 (HSPD-12), Office of Management and Budget (OMB) guidance M-05-24, and Federal Information Processing Standards Publication (FIPS PUB) Number 201. (b) The Contractor shall account for all forms of Government-provided identification issued to the Contractor employees in connection with performance under this contract. The Contractor shall return such identification to the issuing agency at the earliest of any of the following, unless otherwise determined by the Government; (1) When no longer needed for contract performance. (2) Upon completion of the Contractor employee?s employment. (3) Upon contract completion or termination. (c) The Contracting Officer may delay final payment under a contract if the Contractor fails to comply with these requirements. (d) The Contractor shall insert the substance of clause, including this paragraph (d), in all subcontracts when the subcontractor?s employees are required to have routine physical access to a Federally-controlled facility and/or routine access to a Federally-controlled information system. It shall be the responsibility of the prime Contractor to return such identification to the issuing agency in accordance with the terms set forth in paragraph (b) of this section, unless otherwise approved in writing by the Contracting Officer. (End of Clause) (a) Certain supplies or services to be provided under this contract for use by Government are required by law to be obtained from nonprofit agencies participating in the program operated by the Committee for Purchase from People Who Are Blind or Severely Disabled (the Committee) under the Javits-Wagner-O?Day Act (41 U.S.C. 48). Additionally, certain of these supplies are available from the Defense Logistics Agency (DLA), the General Services Administration (GSA), or the Department of Veterans Affairs (VA). The Contractor shall obtain mandatory supplies or services to be provided for Government use under this contract from the specific sources indicated in the contract schedule. (b) The Contractor shall immediately notify the Contracting Officer if a mandatory source is unable to provide the supplies or services by the time required, or if the quality of supplies or services provided by the mandatory source is unsatisfactory. The Contractor shall not purchase the supplies or services from other sources until the Contracting Officer has notified the Contractor that the Committee or an Ability One central nonprofit agency has authorized purchase from other sources. (c) Price and Delivery information for the mandatory supplies is available from the Contracting Officer for the supplies obtained through the DLA/GSA/VA distribution facilities. For mandatory supplies or services that are not available from DLA/GSA/VA, price and delivery information is available from the appropriate central nonprofit agency. Payments shall be made directly to the source making delivery. Points of contact for Ability One central nonprofit agencies are: (1) National Industries for the Blind (NIB) 1310 Braddock Place, Alexandria, VA 22314-1691 (703) 310-0500; and.(2) NISH 8401 Old Courthouse Road, Vienna, VA 22182 (571) 226-4660. Alternate I (May 2014). As prescribed in 19-1309(a)(2), add the following paragraph (b)(9) to the basic provision: (9) [Complete if offeror represented itself as disadvantaged in paragraph (b)(2) of this provision] The offeror shall check the category in which its ownership falls: ____ Black American ____Hispanic American ____Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians). ____Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, Republic of Palau, Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru). ____Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal). ____Individual/concern, other than one of the preceding. As prescribed in 19.309(c), insert the following clause: POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (Jul 2013) (a) Definitions. As used in this clause- Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority. Small business concern means a concern, including its affiliates that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is ?not dominant in its field of operation? when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity. (b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall rerepresent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following: (1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract. (2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract. (3) For long-term contracts- (i) Within 60 to 120 days prior to the end of the fifth year of the contract; and (ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter. (c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code assigned to this contract. The small business size standard corresponding to this NAICS code can be found at http://www.sba.gov/content/table-small-business-size-standards. (d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees. (e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update. (f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause. (g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed: The Contractor represents that it o is, o is not a small business concern under NAICS Code ______________ assigned to contract number ______________. [Contractor to sign and date and insert authorized signer?s name and title]. (End of clause) Inspection of Supplies ? Fixed Price (August 1996). Authorized Deviations in Clauses (April 1984). As prescribed in 204.7304, use the following clause: SAFEGUARDING OF UNCLASSIFIED CONTROLLED TECHNICAL INFORMATION (NOV 2013) (a) Definitions. As used in this clause? ?Adequate security? means protective measures that are commensurate with the consequences and probability of loss, misuse, or unauthorized access to, or modification of information. ?Attribution information? means information that identifies the Contractor, whether directly or indirectly, by the grouping of information that can be traced back to the Contractor (e.g., program description or facility locations). ?Compromise? means disclosure of information to unauthorized persons, or a violation of the security policy of a system, in which unauthorized intentional or unintentional disclosure, modification, destruction, or loss of an object, or the copying of information to unauthorized media may have occurred. ?Contractor information system? means an information system belonging to, or operated by or for, the Contractor. ?Controlled technical information? means technical information with military or space application that is subject to controls on the access, use, reproduction, modification, performance, display, release, disclosure, or dissemination. Controlled technical information is to be marked with one of the distribution statements B-through-F, in accordance with DoD Instruction 5230.24, Distribution Statements on Technical Documents. The term does not include information that is lawfully publicly available without restrictions. ?Cyber incident? means actions taken through the use of computer networks that result in an actual or potentially adverse effect on an information system and/or the information residing therein. ?Exfiltration? means any unauthorized release of data from within an information system. This includes copying the data through covert network channels or the copying of data to unauthorized media. ?Media? means physical devices or writing surfaces including, but is not limited to, magnetic tapes, optical disks, magnetic disks, large-scale integration memory chips, and printouts onto which information is recorded, stored, or printed within an information system. ?Technical information? means technical data or computer software, as those terms are defined in the clause at DFARS 252.227-7013, Rights in Technical Data-Non Commercial Items, regardless of whether or not the clause is incorporated in this solicitation or contract. Examples of technical information include research and engineering data, engineering drawings, and associated lists, specifications, standards, process sheets, manuals, technical reports, technical orders, catalog-item identifications, data sets, studies and analyses and related information, and computer software executable code and source code. (b) Safeguarding requirements and procedures for unclassified controlled technical information. The Contractor shall provide adequate security to safeguard unclassified controlled technical information from compromise. To provide adequate security, the Contractor shall? (1) Implement information systems security in its project, enterprise, or company-wide unclassified information technology system(s) that may have unclassified controlled technical information resident on or transiting through them. The information systems security program shall implement, at a minimum? (i) The specified National Institute of Standards and Technology (NIST) Special Publication (SP) 800-53 security controls identified in the following table; or (ii) If a NIST control is not implemented, the Contractor shall submit to the Contracting Officer a written explanation of how? (A) The required security control identified in the following table is not applicable; or (B) An alternative control or protective measure is used to achieve equivalent protection. (2) Apply other information systems security requirements when the Contractor reasonably determines that information systems security measures, in addition to those identified in paragraph (b)(1) of this clause, may be required to provide adequate security in a dynamic environment based on an assessed risk or vulnerability. Table 1 -- Minimum Security Controls for Safeguarding Minimum required security controls for unclassified controlled technical information requiring safeguarding in accordance with paragraph (d) of this clause. (A description of the security controls is in the NIST SP 800-53, ?Security and Privacy Controls for Federal Information Systems and Organizations? (http://csrc.nist.gov/publications/PubsSPs.html).) Access Control AC-2 AC-3(4) AC-4 AC-6 AC-7 AC-11(1) AC-17(2) AC-18(1) AC-19 AC-20(1) AC-20(2) AC-22Audit & Accountability AU-2 AU-3 AU-6(1) AU-7 AU-8 AU-9Identification and Authentication IA-2 IA-4 IA-5(1) Media Protection MP-4 MP-6 System & Comm Protection SC-2 SC-4 SC-7 SC-8(1) SC-13 SC-15 SC-28 Physical and Environmental Protection PE-2 PE-3 PE-5 Incident Response IR-2 IR-4 IR-5 IR-6 Configuration Management CM-2 CM-6 CM-7 CM-8 Program Management PM-10 System & Information Integrity SI-2 SI-3 SI-4 Maintenance MA-4(6) MA-5 MA-6 Risk Assessment RA-5 Awareness & Training AT-2Contingency Planning CP-9 Legend: AC: Access ControlMA: Maintenance AT: Awareness and TrainingMP: Media Protection AU: Auditing and Accountability PE: Physical & Environmental Protection CM: Configuration ManagementPM: Program Management CP: Contingency PlanningRA: Risk Assessment IA: Identification and AuthenticationSC: System & Communications Protection IR: Incident ResponseSI: System & Information Integrity (c) Other requirements. This clause does not relieve the Contractor of the requirements specified by applicable statutes or other Federal and DoD safeguarding requirements for Controlled Unclassified Information (CUI) as established by Executive Order 13556, as well as regulations and guidance established pursuant thereto. (d) Cyber incident and compromise reporting. (1) Reporting requirement. The Contractor shall report as much of the following information as can be obtained to the Department of Defense via (http://dibnet.dod.mil/) within 72 hours of discovery of any cyber incident, as described in paragraph (d)(2) of this clause, that affects unclassified controlled technical information resident on or transiting through the Contractor?s unclassified information systems: (i) Data Universal Numbering System (DUNS). (ii) Contract numbers affected unless all contracts by the company are affected. (iii) Facility CAGE code if the location of the event is different than the prime Contractor location. (iv) Point of contact if different than the POC recorded in the System for Award Management (address, position, telephone, email). (v) Contracting Officer point of contact (address, position, telephone, email). (vi) Contract clearance level. (vii) Name of subcontractor and CAGE code if this was an incident on a Sub-contractor network. (viii) DoD programs, platforms or systems involved. (ix) Location(s) of compromise. (x) Date incident discovered. (xi) Type of compromise (e.g., unauthorized access, inadvertent release, other). (xii) Description of technical information compromised. (xiii) Any additional information relevant to the information compromise. (2) Reportable cyber incidents. Reportable cyber incidents include the following: (i) A cyber incident involving possible exfiltration, manipulation, or other loss or compromise of any unclassified controlled technical information resident on or transiting through Contractor?s, or its subcontractors?, unclassified information systems. (ii) Any other activities not included in paragraph (d)(2)(i) of this clause that allow unauthorized access to the Contractor?s unclassified information system on which unclassified controlled technical information is resident on or transiting. (3) Other reporting requirements. This reporting in no way abrogates the Contractor?s responsibility for additional safeguarding and cyber incident reporting requirements pertaining to its unclassified information systems under other clauses that may apply to its contract, or as a result of other U.S. Government legislative and regulatory requirements that may apply (e.g., as cited in paragraph (c) of this clause). (4) Contractor actions to support DoD damage assessment. In response to the reported cyber incident, the Contractor shall? (i) Conduct further review of its unclassified network for evidence of compromise resulting from a cyber incident to include, but is not limited to, identifying compromised computers, servers, specific data and users accounts. This includes analyzing information systems that were part of the compromise, as well as other information systems on the network that were accessed as a result of the compromise; (ii) Review the data accessed during the cyber incident to identify specific unclassified controlled technical information associated with DoD programs, systems or contracts, including military programs, systems and technology; and (iii) Preserve and protect images of known affected information systems and all relevant monitoring/packet capture data for at least 90 days from the cyber incident to allow DoD to request information or decline interest. (5) DoD damage assessment activities. If DoD elects to conduct a damage assessment, the Contracting Officer will request that the Contractor point of contact identified in the incident report at (d)(1) of this clause provide all of the damage assessment information gathered in accordance with paragraph (d)(4) of this clause. The Contractor shall comply with damage assessment information requests. The requirement to share files and images exists unless there are legal restrictions that limit a company's ability to share digital media. The Contractor shall inform the Contracting Officer of the source, nature, and prescription of such limitations and the authority responsible. (e) Protection of reported information. Except to the extent that such information is lawfully publicly available without restrictions, the Government will protect information reported or otherwise provided to DoD under this clause in accordance with applicable statutes, regulations, and policies. The Contractor shall identify and mark attribution information reported or otherwise provided to the DoD. The Government may use information, including attribution information and disclose it only to authorized persons for purposes and activities consistent with this clause. (f) Nothing in this clause limits the Government?s ability to conduct law enforcement or counterintelligence activities, or other lawful activities in the interest of homeland security and national security. The results of the activities described in this clause may be used to support an investigation and prosecution of any person or entity, including those attempting to infiltrate or compromise information on a contractor information system in violation of any statute. (g) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (g), in all subcontracts, including subcontracts for commercial items. (End of clause) "Pursuant to FAR Part 9, the Contracting Officer is required to make a determination regarding the responsibility of the proposed awardee. Following receipt of offers, the Contracting Officer or Specialist will send a form, designed to elicit financial information from an offeror's financial institution, to those offerors having a reasonable chance at receiving the award under this solicitation. You should forward that form to your financial institution and have the financial institution complete and send it directly to the Contract Specialist. For sections 2 and 4 on the document, the financial institution may answer with high, medium or low or they can answer with a numerical amount. The form must be returned to the MICC within three (3) business days. In the absence of this information, the Contracting Officer will have no choice except to find your company "not responsible," a finding which will make you ineligible for award." Award for All or None. The Government intends to award one (1) purchase order as a result of this solicitation. Offers received for less than the stated number if items listed in the solicitation will be considered ineligible for award. Effective 1 October 2014, all personnel requiring access to the installation shall possess either a Common Access Card (CAC), Military ID or Individual temporary pass issued by the Fort Benning Directorate of Emergency Services (DES) pursuant to Army Directive 2014-05, Policy and Implementation Procedures for Common Access Card Credentialing and Installation Access for Un-cleared Contractors.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/notices/684952914f9fda3078c6d97912c345e2)
 
Place of Performance
Address: Special Shipping Instructions.
Zip Code: -
 
Record
SN04238999-W 20160826/160824235338-684952914f9fda3078c6d97912c345e2 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.