MODIFICATION
71 -- Mattresses and Dining Tables - Solicitation 1
- Notice Date
- 8/29/2016
- Notice Type
- Modification/Amendment
- NAICS
- 337910
— Mattress Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, ECC, 409th CSB (W564KV) TCC-Kaiserslautern, KO DIRECTORATE OF CONTRACTING UNIT 23156, APO AE, Non-U.S., 09227, Germany
- ZIP Code
- 00000
- Solicitation Number
- W564KV-16-T-0084
- Response Due
- 9/6/2016 10:00:00 AM
- Point of Contact
- Ryan M Bunch, Phone: 496314115503, Evan Porter,
- E-Mail Address
-
ryan.m.bunch.civ@mail.mil, evan.c.porter.civ@mail.mil
(ryan.m.bunch.civ@mail.mil, evan.c.porter.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- Solicitation W564KV-16-T-0084 CLIN 0001 - MATTRESS, DOUBLE Size: 53"W x 80"L x 6"D. (1346mmW x 2032mmL x 152.4mmD) High density lumbar support mattress, Two (2) layers of highly compressed foam. BOTTOM LAYER shall be of a single piece of LH-28 foam (1.5 Density, 28 ILD). UPPER LAYER shall consist of a super soft S17S foam (1.5 Density 17 ILD) and the center, lumbar, section shall be of R45 foam (1.8 Density, 45 ILD). Mattress shall, at a minimum, meet the Federal Flammability Standard FF-4-72 (part 1632) and the foam shall meet, at a minimum, the California 117 Flammability Standard. Foam thickness of mattress: The Thickness of each of the layers (bottom, and upper layer) is to be 3 ". COVER: PU Coated, urine resistant, wipe disinfection. 3 sided zipper cover PU flame retardant, fire protection class: 6.BS5852Crib5. Mattresses shall be palletized and banded with at least two bands. CLIN 0002 - MATTRESS, SINGLE Size: 38"W x 80"L x 6"D, (965mmW x 2032mm x 152.4mmD) High density lumbar support mattress, Two (2) layers of highly compressed foam. BOTTOM LAYER shall be of a single piece of LH-28 foam (1.5 Density, 28 ILD). UPPER LAYER shall consist of a super soft S17S foam (1.5 Density 17 ILD) and the center, lumbar, section shall be of R45 foam (1.8 Density, 45 ILD). Mattress shall, at a minimum, meet the Federal Flammability Standard FF-4-72 (part 1632) and the foam shall meet, at a minimum, the California 117 Flammability Standard. Foam thickness of mattress: The Thickness of each of the layers (bottom, And upper layer) is to be 3 ". COVER: PU Coated, urine resistant, wipe disinfection. 3 sided zipper cover PU flame retardant, fire protection class: 6.BS5852Crib5. CLIN 0003 - MATTRESS COVER, DOUBLE Size: 53 1/2 W x 80"L x 6.3"D, (1359mmW x 2032mmL x162mmD. External lining: 100% blue fire-retardant Trevira GS fabric Art."M300IM Diamante", "smocking"woven 210g per m2;elastic in vertical and horizontal direction; anti-allergic, anti-acarus; Interliner/Wadding: 100% fire-retardant "Technoform" polyester wadding, 200-300g per m2 / 15mm thick; 2nd interliner/backing: backing in white 100% polyester fabric, 80-100g per m2 elastic in vertical and horizontal direction, anti-allergic, anti-acarus. Quilting: horizontal ‘strip" quilting every 8cm; Edging ribbon: white edging ribbon, 38 mm high, 65% polyester and 35% cotton, sewed all around; Zipper: white zipper, 65% polyester and 35% cotton with polyester teeth on one headside plus 30cm on each lateral side in order to facilitate the insertion of the mattress; zipper completely inserted by a double seam. Threads: Thread used for quilting " Cottonpol 120IDS". Thread used for sewing the zipper and edging ribbon " Polyester F 1/50". Fire retardment: The complete mattress cover is IAW with the American Federal Standard DOC FF4-72 16 CFR PART 1632. Mattress cover must be designed for repetive washing and drying with minimal shringage of material for repeated use. The mattress cover must always be tight fitting, before and after washing and drying. The external lining and backing must be made of elastic fabrics as identified above. CLIN 0004 - MATTRESS COVER, SINGLE Size: 38 ¼" W x 80"L x 6"D, (972mmW x 2032mmL x162mmD. External lining: 100% blue fire-retardant Trevira GS fabric Art."M300IM Diamante", "smocking"woven 210g per m2; elastic in vertical and horizontal direction; anti-allergic, anti-acarus; Interliner/Wadding: 100% fire-retardant "Technoform" polyester wadding, 200-300g per m2 / 15mm thick; 2nd interliner/backing: backing in white 100% polyester fabric, 80-100g per m2 elastic in vertical and horizontal direction, anti-allergic, anti-acarus. Quilting: horizontal ‘strip" quilting every 8cm; Edging ribbon: white edging ribbon, 38 mm high, 65% polyester and 35% cotton, sewed all around; Zipper: white zipper, 65% polyester and 35% cotton with polyester teeth on one headside plus 30cm on each lateral side in order to facilitate the insertion of the mattress; zipper completely inserted by a double seam. Threads: Thread used for quilting " Cottonpol 120IDS". Thread used for sewing the zipper and edging ribbon " Polyester F 1/50". Fire retardment: The complete mattress cover is IAW with the American Federal Standard DOC FF4-72 16 CFR PART 1632. Mattress cover must be designed for repetitive washing and drying with minimal shrinkage of material for repeated use. The mattress cover must always be tight fitting, before and after washing and drying. The external lining and backing must be made of elastic fabrics as identified above. CLIN 0005 - TABLE DINING Semi-oval extensible table with rapid connecting legs and folding extension ( Rapid fixing operations and no lose screws or parts), in red oak finish. Sizes: Length: 170 cms; Width: 106 cms Height: 75 cms 67" 41.7" 29.5" Extended sizes: Length: 215 cms; Width: 106 cms Height: 75 cms 84.7" 41.7" 29.5" Top and extension: The oval top with 4 radius of about 300 mm (11.81") is made of a 1700 x 1060 x 25 mm (67" x 41.7" x 0.98") multilayer panel, with an embedded rounded and shaped solid ash wood shaft of 26 x 20 mm (1.02" x 0.8") on the whole perimeter and divided in the middle for extension from 6 to 8 persons. The top is fixed on a pair of aluminum guides of 240 x 960 mm (9.45"x37.8") with central opening and teflon sliding. The two sliding top parts are locked by a mechanism made of an eccentric clip. The extension is a folding one, fixed on a galvanized steel supporting rod, "folded " and stored under the top and laying on a curved supporting metal tube fixed to rails with 4 screws, when the table is not extended. Top and extension are provided with an anti-lift locking system thanks steel pins that groove and tongue either closed or extended and are finished with 0,7 mm thick (0.03") high pressure oak laminate. Base: The top is supported by 4 robust shaped rails made of solid multilayer pine wood finished with varnished open-pore American oak veneer: front and back rail are 880 x 115 x 20 mm ( 34.65" x 4.53" x 0.8"), side rails are 1350 x 115 x 20 mm ( 47.24" x 4.53" x 0.8"). The rails are blended at the 4 corners with a shaped massive wood insert having no jutting edges. Legs: Rapid connecting solid oak wood legs, intersection 63 x 63 mm (0.2" x 0.2") and height 725 mm (28.54"). The legs shall be fixed to the top/base with rapid connectors and manual locking knobs, for easy and fast fixing and removal operations, facilitating also transportation and storage. When stored and not in use the removed legs shall be held under the table top by a special retaining system, in order to have no lose parts. Rapid connectors: Function is to fasten the legs tightly to the top/base in few seconds with no tools needed. Connectors are made of powder coated steel angles fixed to the 4 corners of the base. Once the leg is inserted into the connector it can be fastened manually with the locking knob that is provided with an internal steel press plunger fixed on the screw in order to distribute the lateral pressure on a wide surface of the wooden leg. Fittings: Re-enforcing metal plates 60 x 60 x 2 mm (2.36" x 2.36" x 0.078") on each corner, 1 pair of aluminum guides of 960 mm length (37.8"), central opening with teflon sliding, 12 pins (groove+tongue) of tropicalized steel, 2 cylindrical brassed hinges Ø14 mm (0.55"), 1 extension supporting rod of galvanized iron 800 mm length (31.5") and Ø12 mm (0.47"), right and left eccentric clip of galvanized steel for the locking of the two top parts, 32 galvanized iron screws 4 x 20 mm ( 0.01" x 0.79"), 62 galvanized iron screws 3,5 x 18 mm ( 0.01" x 0.71"), 1 extension rabbet of 520 x 100 x Ø15 mm ( 20.47" x 3.94" x Ø 0.59"), 4 powder coated steel angles for rapid connection of the legs with locking knob, 2 pairs of powder coated iron plates of 80 x 18 x 2 mm ( 3.15" x 0.71" x 0.008), storing system with sliding flasks and locking knobs to store-away legs during transportation and storage. Varnish and glue: solvent varnish + polyurethane foundation + polyurethane matt, vinyl glue (for the wooden parts), epoxy powder coating (for powder coated iron parts). The solid wood used for exposed parts of the item shall be free of discoloration". Packaging: Carton box.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/0aa5237b903f1666a40883cde7695ad9)
- Place of Performance
- Address: Installation Management Command, Europe, Supply Division., ATTN: QA QC Specialist, Sembach Kaserne Bldg 141, 67681 Sembach, Heuberg, Germany, Sembach, Germany
- Record
- SN04246058-W 20160831/160830000047-0aa5237b903f1666a40883cde7695ad9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |