FBODaily.com | FedBizOpps: PRESOL | 65 | Wound_Drains - QSL FBO Package Worksheet

FBO DAILY - FEDBIZOPPS ISSUE OF AUGUST 31, 2016 FBO #5395
SOLICITATION NOTICE

65 -- Wound_Drains - QSL FBO Package Worksheet

Notice Date: 8/29/2016
Notice Type: Combined Synopsis/Solicitation
NAICS: 339113 — Surgical Appliance and Supplies Manufacturing
Contracting Office: Defense Logistics Agency, DLA Acquisition Locations, DLA Troop Support - Medical, 700 Robbins Avenue, Philadelphia, Pennsylvania, 19111-5096, United States
ZIP Code: 19111-5096
Solicitation Number: MS-1504-14
Point of Contact: Mr. David V. Sheaffer, Phone: 210-536-6075, Mr. Joseph N. Winter, Phone: (210) 536-6072
E-Mail Address: david.v.sheaffer.ctr@mail.mil, joseph.n.winter.ctr@mail.mil
(david.v.sheaffer.ctr@mail.mil, joseph.n.winter.ctr@mail.mil)
Small Business Set-Aside: N/A
Description: Complete answers and all supporting documentation must be provided with the vendor’s submittal by the response date stated in the QSL FBO Sources Sought notification. A vendor who does not meet all of these requirements or who does not submit documentation to support these requirements as requested will not be qualified for the QSL. Vendor must provide responses to the Sources Sought notification via the QSL FBO Package Worksheet. The Defense Health Agency (DHA) Medical Logistics (MEDLOG) Division Medical Materiel Enterprise Standardization Office (MMESO) and the Defense Logistics Agency (DLA) Troop Support Medical Prime Vendor (PV) Program announce a Sources Sought Notification for the creation of a Qualified Suppliers Listing (QSL) for Wound Drains. This is not a request for quote or proposal. The MMESO South is the lead MMESO for this project. These Wound Drains products are for purchase by the Military Treatment Facilities (MTFs) of the Military Health System (MHS) and for the operational assemblages of the Army, Navy, Air Force, Marine Corps, and Naval Expeditionary Medical Support Command (NEMSCOM) and managed regionally by MMESOs North, South, West, Pacific and Europe, hereafter referred to as MMESOs. For information regarding DLA Troop Support Medical's PV program please access its web site at https://www.medical.dla.mil. This Sources Sought notification is intended to solicit information and products for evaluation in order to create a QSL for Wound Drains in accordance with (IAW) FAR 9.2. All items proposed to be included in this QSL must be on a Distribution and Pricing Agreement (DAPA) for the DLA Troop Support Medical/Surgical Prime Vendor (MSPV) Program. All participating vendors must complete the certification in the DAPA Management System (DMS). The MSPV Program requires that all items be manufactured in a Trade Agreements Act (TAA) Compliant Country (see DFARS 252.225-7020 AND 252.225-7021), unless it is determined that no functionally equivalent item is available from a compliant source. To be eligible for inclusion in the proposed QSL, all vendors are required to provide country of origin information in the QSL FBO Package Worksheet. In addition, according to the DAPA Terms and Conditions, you must complete the DAPA TAA Certification for each item offered. If an item offered is a TAA Non-Compliant End Product, the Government can use this information to determine whether or not a waiver exists or if the Government will seek a waiver for the item. Unless a waiver exists or is granted, TAA Non-Compliant Country End Products cannot be added to the QSL and/or DAPA. Any questions concerning TAA may be directed to Donna Raday at DLA Troop Support, donna.raday@dla.mil, 215-737-7885. The QSL for Wound Drains will be established approximately October 2016 and is anticipated to be the basis of a Standardization Action. Qualified vendors will be invited approximately November 2016 to submit pricing proposals to enter into an Incentive Agreement for Wound Drains. The government reserves the right to standardize or not standardize on Wound Drains. A. Products & Performance Required. The MMESOs are seeking product line items in the category of Wound Drains. Within the MHS MTFs and operational procurement this product line has an estimated annual sales volume of $664,571. This forecast is based on historical usage data during a recent 12-month period. Fourteen items are required for addition to the QSL and account for 57.15% ($379,840) of the total volume in sales ($664,571). The specifications for this project are shown in "Requirements to Qualify for QSL" section below. B. Instructions to Vendors Vendors interested in qualifying for inclusion in the QSL must provide an e-mail response to this QSL FBO Sources Sought notification to the lead MMESO POCs below. The vendor's responses must include all detailed information requested in the "Requirements to Qualify for QSL" section below and must also include: (1) Company name and address; (2) Company POC (Name and Phone Number, Fax Number, and E-mail address); (3) Commercial and Government Entity (CAGE) Code; and (4) Identification of the Sources Sought notification to which the vendor is responding. Due to the potential for e-mail to be lost in transmission, from network security, etc., vendors are strongly encouraged to confirm with the lead MMESO that their e-mail submission has arrived. Each submitting vendor is advised to confirm receipt, allowing adequate time for resubmission before the due date and time should a problem occur with the first submission. As part of the "Requirements to Qualify for QSL", vendors must complete and submit the QSL FBO Package Worksheet. Any vendor experiencing difficulty opening the Worksheet may contact the MMESO POCs. The MMESO POC will provide a Worksheet copy via an alternate method (fax, e-mail or hard copy). Vendors that do not meet the deadline of COB 5:00 PM Central Standard Time (CST) on the date listed for closing in this QSL FBO Sources Sought notification will not be included in the lead MMESO's review to establish the QSL and thus will not be able to participate in the subsequent Standardization Action. C. Source Selection Procedures The MMESO Joint Product Review Board (JPRB) will serve as the forum for clinical recommendations for product selection and coordinate logistics efforts in support of DoD Components. The board is chaired by Designated Senior Logisticians (DSLs) and co-chaired by Designated Senior Clinicians (DSCs) in the MMESO Areas of Responsibility (AORs) and includes clinicians and logisticians for MTFs within each MMESO. The Clinical Advisory Committee (CAC) members are the deciding officials for this initiative. The MMESO DSLs and DSCs intend to review responses and evaluate products for selection to the QSL IAW FAR 9.2. Requirements to Qualify for QSL The requirements for this product line are outlined below. Complete answers and all supporting documentation must be provided with the vendor's submittal by the response date stated in this QSL FBO Sources Sought notification. A vendor who does not meet all of these requirements or who does not submit documentation to support these requirements as requested will not be qualified for the QSL. Vendors must provide responses to this Sources Sought notification via the QSL FBO Package Worksheet. 1.Vendor must have a DAPA or be in the process of applying for a DAPA number for the product line listed. Vendor must provide their DAPA number or provide documentation and date the DAPA number was applied for. Vendors who do not continue to process application for a DAPA number will not be considered for continued participation. 2.Vendor must have an agreement with the current DoD Medical/Surgical Prime Vendor CARDINAL HEALTH, or must work with CARDINAL HEALTH to initiate an agreement. 3.Vendor must have an agreement with the current DoD Medical/Surgical Prime Vendor OWENS & MINOR, or must work with OWENS & MINOR to initiate an agreement. 4.Vendor must have a government issued Commercial and Government Entity (CAGE) code assigned for products contained within the specific product group or be in the process of obtaining one. Vendors must validate that their account is Active in the System for Award Management (SAM) and provide CAGE Code. Vendors in the process of obtaining a CAGE Code must provide documentation to support that they have registered in SAM. Vendors who do not continue to process application for a CAGE Code and/or a SAM account will not be considered for continued participation. See https://www.sam.gov/portal/public/SAM/. 5. Vendor offered products should be TAA compliant. End-items offered shall be manufactured or substantially transformed either in the U.S. or in Designated or Qualifying countries, unless it is determined that no functionally equivalent item is available from a compliant source. Therefore, the vendor at the item level must provide country of origin for all required items and any optional items offered. Vendor must provide product catalog & literature for any items offered in response to this Sources Sought Notification. Vendor must submit the following information via QSL FBO Package Worksheet for each offered product: Full item description, Distributor Part Number, Manufacturer Part Number, Manufacturer Name, Number of eaches in Unit of Sale, and country of origin. Only ONE Vendor Part Number (PN) should be provided for each item/sample. Required Products /Annual Usage in Units / 5.1WOUND DRAIN BULB RESERVOIR - 100 ML SILICONE /15,970 / 5.2WOUND DRAIN TUBE SILICONE FLAT 10 MM 3/4 FLUTED /70 / 5.3WOUND DRAIN TUBE SILICONE FLAT 10 MM FULL FLUTED /850 / 5.4WOUND DRAIN TUBE SILICONE FLAT 10 MM FULL FLUTED AND TROCAR / 770 / 5.5WOUND DRAIN TUBE SILICONE FLAT 7 MM 3/4 FLUTED AND TROCAR /130 / 5.6WOUND DRAIN TUBE SILICONE FLAT 7 MM FULL FLUTED /220 / 5.7WOUND DRAIN TUBE SILICONE FLAT 7 MM FULL FLUTED AND TROCAR /390 / 5.8WOUND DRAIN TUBE SILICONE ROUND 10FR FULL FLUTED AND TROCAR /340 / 5.9WOUND DRAIN TUBE SILICONE ROUND 10FR FULL FLUTED HUBLESS AND TROCAR /826 / 5.10WOUND DRAIN TUBE SILICONE ROUND 15FR FULL FLUTED HUBLESS /160 / 5.11 WOUND DRAIN TUBE SILICONE ROUND 15FR FULL FLUTED HUBLESS AND TROCAR /2,000 / 5.12WOUND DRAIN TUBE SILICONE ROUND 19FR FULL FLUTED HUBLESS /110/ 5.13WOUND DRAIN TUBE SILICONE ROUND 19FR FULL FLUTED HUBLESS AND TROCAR /560 / 5.14WOUND DRAIN TUBE SILICONE ROUND 24FR FULL FLUTED HUBLESS /970 / 6.Vendor must provide Wound Drains not made with natural rubber latex and provide supporting documentation with initial submittal. 7.Vendor must provide Wound Drains designed only for single use and provide supporting documentation with initial submittal. 8.Vendor must provide Wound Drains that are sterile and provide supporting documentation with initial submittal. 9.Vendor must provide Wound Drains that are di-(2-ethylhexyl) phthalate (DEHP) free/safe and provide supporting documentation with initial submittal. 10.Vendor must provide Wound Drains that are packaged with an "overwrap" which will allow for placement within a sterile field and provide supporting documentation with initial submittal. Vendor may provide any or all of the optional items listed below, following the same format as for requirement number 5. Item Description / 1.WOUND DRAIN BOTTLE EVACUATOR RESERVOIR - 400 ML SILICONE / 2.WOUND DRAIN BULB RESERVOIR - 400 ML SILICONE / 3.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML PVC WITH ROUND 1/4 INCH END PERFORATION TUBE AND TROCAR / 4.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML PVC WITH ROUND 1/8 INCH END PERFORATION TUBE AND TROCAR / 5.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML PVC WITH ROUND 10FR MID PERFORATION TUBE AND TROCAR / 6.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML PVC WITH ROUND 15FR MID PERFORATION TUBE AND TROCAR / 7.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML PVC WITH ROUND 19FR MID PERFORATION TUBE AND TROCAR / 8.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML PVC WITH ROUND 3/16 INCH END PERFORATION TUBE AND TROCAR / 9.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML PVC WITH ROUND 7FR MID PERFORATION TUBE AND TROCAR / 10.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML SILICONE WITH ROUND 10FR MID PERFORATION TUBE AND TROCAR / 11.WOUND DRAIN KIT THREE SPRING ROUND RESERVOIR - 400 ML SILICONE WITH ROUND 19FR MID PERFORATION TUBE AND TROCAR / 12.WOUND DRAIN KIT BOTTLE EVACUATOR RESERVOIR - 400 ML PVC WITH ROUND 1/8 INCH MID PERFORATION TUBE AND TROCAR / 13.WOUND DRAIN KIT BOTTLE EVACUATOR RESERVOIR - 400 ML PVC WITH ROUND 3/16 INCH END PERFORATION TUBE AND TROCAR / 14.WOUND DRAIN KIT BOTTLE EVACUATOR RESERVOIR - 400 ML SILICONE WITH ROUND 1/4 INCH END PERFORATION TUBE AND TROCAR / 15.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 10 MM 3/4 PERFORATION HUBLESS TUBE / 16.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 10 MM 3/4 PERFORATION TUBE / 17.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 10 MM FULL PERFORATION HUBLESS TUBE / 18.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 10 MM FULL PERFORATION HUBLESS TUBE AND TROCAR / 19.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 10 MM FULL PERFORATION TUBE / 20.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 7 MM FULL PERFORATION HUBLESS TUBE / 21.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 7 MM FULL PERFORATION HUBLESS TUBE AND TROCAR / 22.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH FLAT 7 MM FULL PERFORATION TUBE / 23.WOUND DRAIN KIT BULB RESERVOIR - 100 ML SILICONE WITH ROUND 1/8 INCH END PERFORATION TUBE AND TROCAR / 24.WOUND DRAIN KIT BULB RESERVOIR - 400 ML SILICONE WITH ROUND 19FR END PERFORATION TUBE AND TROCAR / 25.WOUND DRAIN THREE SPRING ROUND RESERVOIR - 400 ML PVC / 26.WOUND DRAIN TUBE PVC ROUND 10FR CENTER PERFORATION AND TROCAR / 27.WOUND DRAIN TUBE SILICONE FLAT 10 MM 3/4 FLUTED AND TROCAR / 28.WOUND DRAIN TUBE SILICONE FLAT 10 MM 3/4 PERFORATION HUBLESS / 29.WOUND DRAIN TUBE SILICONE FLAT 10 MM FULL PERFORATION / 30.WOUND DRAIN TUBE SILICONE FLAT 10 MM FULL PERFORATION AND TROCAR / 31.WOUND DRAIN TUBE SILICONE FLAT 10 MM FULL PERFORATION HUBLESS / 32.WOUND DRAIN TUBE SILICONE FLAT 7 MM 3/4 FLUTED / 33.WOUND DRAIN TUBE SILICONE FLAT 7 MM 3/4 PERFORATION / 34.WOUND DRAIN TUBE SILICONE FLAT 7 MM 3/4 PERFORATION HUBLESS / 35.WOUND DRAIN TUBE SILICONE FLAT 7 MM FULL PERFORATION / 36.WOUND DRAIN TUBE SILICONE FLAT 7 MM FULL PERFORATION AND TROCAR / 37.WOUND DRAIN TUBE SILICONE FLAT 7 MM FULL PERFORATION HUBLESS / 38.WOUND DRAIN TUBE SILICONE ROUND 1/4 INCH END PERFORATION AND TROCAR / 39.WOUND DRAIN TUBE SILICONE ROUND 10FR 3/4 FLUTED AND TROCAR / 40.WOUND DRAIN TUBE SILICONE ROUND 10FR END PERFORATION / 41.WOUND DRAIN TUBE SILICONE ROUND 10FR END PERFORATION AND TROCAR / 42.WOUND DRAIN TUBE SILICONE ROUND 10FR FULL FLUTED HUBLESS / 43.WOUND DRAIN TUBE SILICONE ROUND 15FR 3/4 FLUTED / 44.WOUND DRAIN TUBE SILICONE ROUND 15FR 3/4 FLUTED AND TROCAR / 45.WOUND DRAIN TUBE SILICONE ROUND 15FR END PERFORATION / 46.WOUND DRAIN TUBE SILICONE ROUND 15FR END PERFORATION AND TROCAR / 47.WOUND DRAIN TUBE SILICONE ROUND 15FR FULL FLUTED AND TROCAR / 48.WOUND DRAIN TUBE SILICONE ROUND 15FR FULL FLUTED HUBLESS AND BENDABLE TROCAR / 49.WOUND DRAIN TUBE SILICONE ROUND 19FR 3/4 FLUTED / 50.WOUND DRAIN TUBE SILICONE ROUND 19FR 3/4 FLUTED AND TROCAR / 51.WOUND DRAIN TUBE SILICONE ROUND 19FR END PERFORATION / 52.WOUND DRAIN TUBE SILICONE ROUND 19FR FULL FLUTED HUBLESS AND BENDABLE TROCAR / 53.WOUND DRAIN TUBE SILICONE ROUND 28FR FULL FLUTED HUBLESS / 54.WOUND DRAIN TUBE SILICONE ROUND 3/16 INCH END PERFORATION / 55.WOUND DRAIN TUBE SILICONE ROUND 3/16 INCH END PERFORATION AND TROCAR / 56.WOUND DRAIN TUBE SILICONE ROUND 3/32 INCH END PERFORATION / 57.WOUND DRAIN TUBE SILICONE ROUND 32FR FULL FLUTED HUBLESS / 58.WOUND DRAIN TUBE SILICONE ROUND 7FR END PERFORATION / 59.WOUND DRAIN TUBE SILICONE ROUND 7FR END PERFORATION HUBLESS / Evaluation Evaluations for this product line will be done by a panel of experts as a document review. Points of Contact (POCs): Mr. David Sheaffer, MMESO South Team Leader, david.v.sheaffer.ctr@mail.mil, 210-536-6075, and Mr. Joe Winter, MMESO South Clinical Analyst, joseph.n.winter.ctr@mail.mil, 210-536-6072. DLA Troop Support Medical Contracting Officer: Tara J. Perrien, tara.perrien@dla.mil, 215-737-8307.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCP-M/MS-1504-14/listing.html)
Place of Performance: Address: Medical Materiel Enterprise Standardization Offices (MMESO), 7800 IH-10 West, Suite 220, San Antonio, Texas, 78230, United States; Zip Code: 78230
Record: SN04246120-W 20160831/160830000125-6d2c3ccda6125299c680c78c2a495df3 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

65 -- Wound_Drains - QSL FBO Package Worksheet