SOLICITATION NOTICE
75 -- Multi Media Destruction Device/Disintegrator
- Notice Date
- 8/31/2016
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- Mission and Installation Contracting Command-Fort Benning, Fort Benning, GA 31909
- ZIP Code
- 31909
- Solicitation Number
- 0010916901
- Response Due
- 9/7/2016
- Archive Date
- 3/6/2017
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is 0010916901 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-90. The associated North American Industrial Classification System (NAICS) code for this procurement is 333318 with a small business size standard of 1,000.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2016-09-07 14:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Fort Benning, GA 31905 The MICC Fort Benning requires the following items, Meet or Exceed, to the following: LI 001: Minimum Requirements: TOTAL:HIGH SECURITY SOLID STATE AND OPTICAL DESTRUCTION DEVICE CLASSIFICATION REQUIREMENTS: # Device must be listed in the NSA/CSS Evaluated Products List, dated 15 April 2016 for High Security Solid State Destruction Devices. FUNCTIONAL, PERFORMANCE AND PHYSICAL REQUIREMENTS:MEDIA: # Device must destroy solid state storage media, including memory cards, thumb drives, solid state drives, cell phones, tablets and optical media, including CDs, DVDs and Blu-Ray to 2mm particle size. # Device must accept media up to 0.85 inches by 8 inches. PERFORMANCE: # Device must be continuous duty and have push button, automatic operation. # Device must have mechanism to sense overload and reverse automatically to clear and prevent jams. # Device must have an automatic bin-full sensor. # Destruction blades, grinders and screens must be easily reused, adjusted and replaced. DIMENSIONS / WEIGHT: # Device must have a footprint no greater than 27# x 42.5# with a height no taller than 48 inches to save on storage expenses. # Device must not have a weight of more than 1,500 pounds Device must have castor wheels. POWER REQUIREMENT # Device must be 200-240V/12A/50-60Hz.ACCOUSTICS: # Device must be 80 db or less AIR FILTRATION: # Stage System w/HEPA and Carbon Filtration SPARE PARTS KIT: ITEM: (1) 2mm Screen # (2) Bed Knives # (1) Grinder Rotary Cutter Replacement Assembly ?? ?? DEBRIS BIN BAGS: QTY ITEM: ?# (1) ?? Box 30 Count SHIPPING/DELIVERY; # CONUS ?WARRANTY AND MAINTENANCE: # 1 year, parts and Labor, # ONSITE SERVICE. PART # DESCRIPTIONEXTENDED PRICE 972-2902 SSMD Level 2 Spare Parts Kit $5130.00 FOB: Destination, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC Fort Benning intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC Fort Benning is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this aquisition. The selected Offeror must comply with the following commercial item terms and conditions: FAR 52.209-5, Certification Regarding Responsibility Matters and FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.225-13, Restriction on Certain Foreign Purchases; and 52.232-33, Payment by Electronic Funds Transfer ? Central Contractor Registration. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. The following DFARS clauses are applicable under DFAS 252.212-7001: 252.225-7001, Buy American Act and Balance of Payments Program; 252.211-7003 Item Identification and Valuation (JUN 2005); 252.246-7000 Material Inspection and receiving Report This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.sam.gov. New equipment ONLY, NO remanufactured or used products. No "GREY" market items. Bid MUST be valid for 30 calendar days after submission FOB Destination CONUS (CONtinental U.S.) No partial shipments unless otherwise specified at time of order Payment terms shall be net 30 unless otherwise agreed to by MICC Fort Benning. In accordance with DFARS 252.232-7003, ?Electronic Submission of Payment Requests and Receiving Reports?, the contractor shall submit their payment request electronically using the Wide Area Workflow (WAWF). The WAWF website is located at https://wawf.eb.mil. There is no charge to use WAWF. Contractors must register to use WAWF at this website and ensure an electronic business point of contact (POC) is designated in the Central Contractor Registration site at http://www.ccr.gov within ten (10) calendar days after award of this contract. Contractor training is available at the website Home Page, under ?about WAWF?. Contractors may contact the WAWF Customer Support for assistance toll free at 866-618-5988; commercial: 801-605-7095; Fax commercial: 801-605-7453 or CSCASSIG@CSD.DISA.MIL Submission of Offers in the English Language The Government will award a contract resulting from this solicitation to the responsible quoter whose quote conforming to the solicitation will be most advantageous to the Government, considering price alone. Alternate I (May 2014). As prescribed in 19-1309(a)(2), add the following paragraph (b)(9) to the basic provision: (9) [Complete if offeror represented itself as disadvantaged in paragraph (b)(2) of this provision] The offeror shall check the category in which its ownership falls: ____ Black American ____Hispanic American ____Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians). ____Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, Republic of Palau, Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru). ____Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal). ____Individual/concern, other than one of the preceding. (d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees. (e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update. (f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause. (g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed: The Contractor represents that it o is, o is not a small business concern under NAICS Code ______________ assigned to contract number ______________. [Contractor to sign and date and insert authorized signer?s name and title]. (d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees. (e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update. (f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause. (g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed: The Contractor represents that it o is, o is not a small business concern under NAICS Code ______________ assigned to contract number ______________. [Contractor to sign and date and insert authorized signer?s name and title]. Effective 1 October 2014, all personnel requiring access to the installation shall possess either a Common Access Card (CAC), Military ID or Individual temporary pass issued by the Fort Benning Directorate of Emergency Services (DES) pursuant to Army Directive 2014-05, Policy and Implementation Procedures for Common Access Card Credentialing and Installation Access for Un-cleared Contractors (a) The Contractor shall comply with agency personal identity verification procedures identified in the contract that implement Homeland Security Presidential Directive-12 (HSPD-12), Office of Management and Budget (OMB) guidance M-05-24, and Federal Information Processing Standards Publication (FIPS PUB) Number 201. (b) The Contractor shall insert this clause in all subcontracts when the subcontractor is required to have routine physical access to a Federally-controlled facility and/or routine access to a Federally-controlled information system. "Pursuant to FAR Part 9, the Contracting Officer is required to make a determination regarding the responsibility of the proposed awardee. Following receipt of offers, the Contracting Officer or Specialist will send a form, designed to elicit financial information from an offeror's financial institution, to those offerors having a reasonable chance at receiving the award under this solicitation. You should forward that form to your financial institution and have the financial institution complete and send it directly to the Contract Specialist. For sections 2 and 4 on the document, the financial institution may answer with high, medium or low or they can answer with a numerical amount. The form must be returned to the MICC within three (3) business days. In the absence of this information, the Contracting Officer will have no choice except to find your company "not responsible," a finding which will make you ineligible for award." Award for All or None. The Government intends to award one (1) purchase order as a result of this solicitation. Offers received for less than the stated number if items listed in the solicitation will be considered ineligible for award.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/a203714412931bb7872fede5eb9351bd)
- Place of Performance
- Address: Fort Benning, GA 31905
- Zip Code: 31905
- Zip Code: 31905
- Record
- SN04250564-W 20160902/160901000943-a203714412931bb7872fede5eb9351bd (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |