Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 03, 2016 FBO #5398
SOURCES SOUGHT

16 -- Helicopter Hydraulic Power Cart - AGSE-15-ASAM-01 - Aviation Hydraulic Power Cart Sources Sought - Mandatory Company Information Sheet

Notice Date
9/1/2016
 
Notice Type
Sources Sought
 
NAICS
336413 — Other Aircraft Parts and Auxiliary Equipment Manufacturing
 
Contracting Office
Department of the Army, National Guard Bureau, USPFO for Pennsylvania, Department of Veteran & Military Affairs, Annville, Pennsylvania, 17003-5003
 
ZIP Code
17003-5003
 
Solicitation Number
001091897911
 
Point of Contact
Raymond C Folweiler, Phone: 7178616872
 
E-Mail Address
raymond.c.folweiler.mil@mail.mil
(raymond.c.folweiler.mil@mail.mil)
 
Small Business Set-Aside
N/A
 
Description
This is a mandatory document that must be completed by all interested vendors and returned per instructions in the sources sought Sources Sought AGSE-15-ASAM-01 SOURCES SOUGHT The Pennsylvania National Guard (PANG) United States Property Fiscal Office (USPFO) Purchasing and Contracting (P&C) is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in providing Two AMCOM APPROVED HYDRAUIC POWER CARTS. The result of this market research will contribute to determining the method of procurement. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 336413 Size Standard 1,000. THERE IS NO SOLICITATION AT THIS TIME. This request for capability information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the government assumes no financial responsibility for any costs incurred. The Government will not entertain any quotes or proposals The government will evaluate market information to ascertain potential market capacity to provide Two AMCOM APPROVED HYDRAUIC POWER CARTS that meet the AMCOM requirements of AGSE-15-ASAM-01. BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES, FURTHER SET-ASIDE UNDER AN SBA SOCIOECONOMIC PROGRAM, OR PROCURED THROUGH FULL AND OPEN COMPETITION. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. Submission Instructions: Interested parties who consider themselves qualified to perform the above-listed services are invited to submit a response to this Sources Sought Notice to include the completion of the Company Information attachment: by 1100AM 08SEP16 All responses under this Sources Sought Notice must be emailed to LTC Raymond C Folweiler IV Email: raymond.c.folweiler.mil@mail.mil. If you have any questions concerning this opportunity please contact: LTC Raymond C. Folweiler IV Email: raymond.c.folweiler.mil@mail.mil Scope, Requirements, and Objectives Scope: Due to the volume of work, and limited space on the airfield ramp to conduct maintenance, AASF requires an AMCOM approved Hydraulic Power Cart system. The Indoor Hydraulic Power Cart must be electric in order to conduct indoor hydraulic diagnostics and repairs. Hydraulic carts at the AASF are used on all airframes while working on flight control systems. It is critical that the system meets ISO, ANSI, AMCOM requirements for use on Army aircraft. Requirements: The sources sought must be capable of providing two electric Hydraulic Power Carts that are AMCOM approved Hydraulic Power Cart system. Must be AMCOM approved Vendor within scope of AGSE-15-ASAM-01. 1) Adjustable working pressure between 1000-3000psi 2) 3 phase, electric motor available in 10 voltages (50 or 60 Hz), 25HP minimum. 3) Adjustable pressure compensated, variable voltage, piston pump 4) 30 gal (114 l) stainless steel reservoir with desiccant air filtration 5) In line, return side, sample valve that allows hot oil sample to be taken with system operating. Must be easy access fluid sampling valve (meets ANSI T2.24.1-1991) 6) Large oil cooler with 3 phase electric fan (16,000 btu/hr cooling capacity) 7) High efficiency, non-bypassing pressure filter with 2-micron absolute, Microglass III element (Beta rating > 1,000 based on ISO 4572) 8) Large capacity return filter with 5 micron absolute, Microglass III element (Beta rating > 200 based on ISO 4572) 9) 2-25 gpm (7.6-95 lpm) dual scale flow meter 10) Dual scale pressure gauge 11) Standard 25 ft (7.62 m) pressure and return hoses rated at 4000psi minimum 12) Standard 50 ft (15.24 m) input power cord without input plug 13) Wheel casters must be able to move across unimproved terrain to include, but not limited to, asphalt, stone, and concrete 14) If not AMCOM approved system, vendor must complete oil sample requirement IAW applicable Aviation Safety Action Message (AGSE-15-ASAM-01),prior to delivery, and at no cost to the customer Objective: Provide two electric Hydraulic Power Carts for indoor use that meets ISO, ANSI, AMCOM requirements for use on Army aircraft.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/NGB/DAHA36/001091897911/listing.html)
 
Place of Performance
Address: FT Indiantown Gap, Annville, Pennsylvania, 17003, United States
Zip Code: 17003
 
Record
SN04253195-W 20160903/160902000853-0dbf470442d9c62aba00603846d3f525 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.