SOLICITATION NOTICE
52 -- Optics for imaging of explosives capital improvement - Combo Solicitation
- Notice Date
- 9/6/2016
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333314
— Optical Instrument and Lens Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, ACC - APG (W911QX) Adelphi, 2800 POWDER MILL RD, ADELPHI, Maryland, 20783-1197, United States
- ZIP Code
- 20783-1197
- Solicitation Number
- W911QX-16-T-0372
- Point of Contact
- Coleman Dieger, Phone: 3013940755
- E-Mail Address
-
d.c.dieger.civ@mail.mil
(d.c.dieger.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- ARL requires optical components to update diagnostics within the explosive imaging suite ARL requires optical components to update diagnostics within the explosive imaging suite To update the optical diagnostics capability of the explosive imaging suite for Adelphi Research Laboratory (ARL). B. The following compents are required: Qty: One (1) 150W continuous power, >0.1 J/cm^2 energy density, 1 inch sensor Qty: One (1) Compatible meter with thermopile sensor. Digital display with history Qty: One (1) Sensor size > 4mm, rise time <30ns, bandwidth >25MHz Qty: One (1) >= 6.5" X 9.5" with >300 lb. capacity Qty: One (1) Tilt range -3.5 to 14 deg on long axis and -5 to 16 deg on short axis Qty: One (1) ¼-20 hex head screw assortment Qty: One (1) Over the glasses style with OD 3-4 @532 nm polycarbonate lenses Qty: One (1) Over the glasses style with OD >7 @532 nm polycarbonate lenses Qty: One (1) 50.8 mm lenses ~400-700nm transmission Qty: One (1) 1" thick aluminum ¼-20 grid tapped holes, 30"X30, 8"X8", 12"X12", and 24"X24" respectively Qty: One (1) Optical post holders for 0.5" SS posts. Offset slotted mount for ¼-20 screws. heights of 1.0, 2.0, 3.0, and 4.0 respectively Qty: One (1) Stainless Optical posts compatible with post holder. 8/32 and ¼-20 threaded ends, 0.5 in diameter, 0.75', 1", 2", 4", 6', and 8" respectively Qty: One (1) Compatible post clamps for 0.5" optical mounting post. right angle fixed, angle adjustable, and in-line respectively Qty: One (1) Multiaxis adjustment, ¼-20 and 8-32 thread compatible Qty: One (1) Input beam diameter >= 3.0mm exit diameter 25 mm with >2 J/cm^2 damage threshold. greater than 98% transmission @532 nm Qty: One (1) Core diameter >5mm transmission range ~300-650nm, >2m length, > 80% transmission @532 Qty: One (1) Mount for 2" circular lens singlets. ¼-20 and 8-32 screw compatibility Qty: One (1) Mount for 2" circular mirrors with x,y adjustment Qty: One (1) Front surface metallic elliptical mirrors with lambda/10 surface flatness and 40-20 surface quality. >80% reflectance from ~300-2600 nm. ~36mm X 25.4mm Qty: One (1) Front surface metallic mirrors lambda/10 flatness, 15-5 scratch-dig. 50.8mm and 25.4 mm diameter respectively Qty: One (1) ~190mm square front surface mirror, 60-40 scratch-dig, reflectance >90% 400-700nm The contractor shall provide these commercial components for ARL in updating the optical diagnostics explosive imaging suite; components included in submitted proposals must meet the above minimum requirements.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/204fda478886767845494136a0a66ad8)
- Place of Performance
- Address: U.S. Army Research Laboratory, ATTN: RDRL-WMP-G, Aberdeen Proving Ground, Maryland, 21005-5066, United States
- Zip Code: 21005-5066
- Zip Code: 21005-5066
- Record
- SN04257640-W 20160908/160907173538-204fda478886767845494136a0a66ad8 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |