DOCUMENT
37 -- Request for Information (RFI) Toro Dingo TX 1000 wide diesel or similar item - Attachment
- Notice Date
- 9/7/2016
- Notice Type
- Attachment
- NAICS
- 336112
— Light Truck and Utility Vehicle Manufacturing
- Contracting Office
- Department of Veterans Affairs;NCA Contracting Service;75 Barrett Heights Rd. Suite 309;Stafford VA 22556
- ZIP Code
- 22556
- Solicitation Number
- VA78616N0437
- Response Due
- 9/12/2016
- Archive Date
- 10/12/2016
- Point of Contact
- Iris Chen
- E-Mail Address
-
1-3787
- Small Business Set-Aside
- Service-Disabled Veteran-Owned Small Business
- Description
- SUBJECT: Request for information (RFI), Synopsis for Dingo TX1000 Wide Track Diesel or similar item. The Department of Veterans Affairs, is seeking a better understanding of the market capability for the proposed equipment above. The purpose of this Request for information (RFI) is to obtain information on the capability of vendors to provide Dingo TX1000 Wide Track Diesel or similar item for the National Cemetery Administration (NCA). This RFI allows potential contractor to submit a non-binding statement of interest and documentation demonstrating their capabilities, and suggestions that will allow the Government to refine its potential course of action. The RFI effort is intended to assess available sources capabilities, and solicit feedback for acquisition planning purposes. National cemetery Administration (NCA) is requesting response from qualified suppliers and/or businesses concerns. The NAICS codes for this effort are 336112, 333112, and 333111. INSTRUCTIONS: NCA is looking for interested Service Disabled Veteran Owned Small Business (SDVOSB) and Veteran Owned Small Businesses (VOSB) for a possible set-aside. Submit a brief description, four (4) pages or less (including cover letter) that demonstrates your company's ability to provide Dingo TX1000 Wide Track Diesel or similar item. Responses should include DUNS number, business size, business type, socio-economic status. All interested parties must be registered SAM and verified in VetBiz.gov. Please provide a copy of your FSS or GSA schedule, if applicable. Please submit your responses to the Contracting Officer, Iris Chen at Iris.Chen1@va.gov, Responses are due by 11:00AM EST September 12, 2016 DISCLAIMER: Issuance of this RFI or Sources Sought is to assist the VA in determining sources only and does not commit or bind the Government under any circumstances, nor does it constitute any obligation whatsoever on the part of the Government to procure these services or to issue a solicitation, nor to notify respondents of the results of this notice. No solicitation documents exist at this time; the Department of Veterans Affairs is neither seeking proposals nor accepting unsolicited proposals, and responses to this RFI or Sources Sought cannot be accepted as offers. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Any information the vendor considers proprietary should be clearly marked as such. The U.S. Government will not pay for any information or administrative costs incurred in response to this RFI or Sources Sought. SALIENT CHARACTERISTICS: Dingo TX1000 Wide Track Diesel or similar item Options: TX1000 Standard Bucket Track Width 9.5" wide Wheelbase 41" Rubber tracks 9.5" Ground Clearance 6" Overall Length 100.7" with bucket 81.7" without bucket Overall Width 41" wide Overall Height 53.2" Maximum Operating Height 105" Hinge Pin Height 81" Dump Height 61" Dump Angel 40 degrees Reach 24.5" fully raised Group Speed 4.7 mph forward 4.7 mph reverse Tip Capcity 3071 lbs SAE J818 Rating 35% tip capacity 1075 lbs Weight 2790 lbs Ground Pressure 3.6 psi Attachment 1: Soil Conditioner Mini - part number 900529 Angling Manual Working Width 48" Working Depth 0-2.5 Maximum Angle (both ways) 25" Overall Wideth 56.75" Overall Length 55.5" Rated Flow 9/15 GPM Weight 470 lbs Mounting Kit Configurations ASV/Terex (RC/PT30) Bobcat (MT-52/55, 463/S70 Toro Dingo/Vermeer/Boxer/Ditch Witch/Ramrod/Kanga Universal Mounting Plate for skid steers with up to 1000 lb. rated operating capacity and within rated flow Options: Hydraulic Power Angling Toggle Control Harness Loader Specific Wire Harness Factory Installed Couplers Attachment 2: Hydraulic Snowblower Mini - Model 1600 part number 900455 2 Stages Width of cut 53" Cutting Height 22" Cutting Edge 3/8" X 3" bolt-on Skid Shoes Adjustable Auger Diameter 12" open flight Fan Diameter 16" 4-blade Chute Rotation Hydraulic Casting Distance up to 25ft Mounting Plate Mini Skid Steer Hoses included Hydraulic Flow 10-14 GPM Mounting Kit Configurations ASV/Terex (RC/PT30) Toro Dingo/Vermeer/Boxer/Ditch Witch/Ramrod/Kanga Universal Mounting Plate for skid steers with up to 1000 lb. rated operating capacity and within rated flow Attachment 3: Mini Skid Steer - Model Industrial Grapple Rake Mini part number 900303 Weight 375 lb Overall Width 48.63" Width Between Teeth 6.38" Height w/Teeth Closed 27" Maximum Height w/Teeth Open 37.25" Maximum Opening 36" Grapple Teeth (upper) 7 Grapple Teeth (lower) 8 Mounting Kit Configuration ASV/Terex (RC/PT30) Toro Dingo/Vermeer/Boxer/Ditch Witch/Ramrod/Kanga Universal Mounting Plate for skid steers with up to 1000 lb. rated operating capacity and within rated flow Options: Factory Installed Couplers Attachment 4: Earth Auger Mini - part number 900752 Maximum Diameter 30" Rated Flow 7-15 GPM Shaft Speed 54-115 RPM Operating PSI 2000-3000 PSI Weight (with 9" bit) 360 lbs Mounting Kit Configuration ASV/Terex (RC/PT30) Toro Dingo/Vermeer/Boxer/Ditch Witch/Ramrod/Kanga Universal Mounting Plate for skid steers with up to 1000 lb. rated operating capacity and within rated flow Options: Factory Installed Couplers 24" Heavy Duty Bit
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/VA/VANCA/VANCA/VA78616N0437/listing.html)
- Document(s)
- Attachment
- File Name: VA786-16-N-0437 VA786-16-N-0437_1.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2991505&FileName=VA786-16-N-0437-004.docx)
- Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2991505&FileName=VA786-16-N-0437-004.docx
- Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
- File Name: VA786-16-N-0437 VA786-16-N-0437_1.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=2991505&FileName=VA786-16-N-0437-004.docx)
- Record
- SN04259935-W 20160909/160907235427-9ab4a58ec5c1043ec810c1135bdc93af (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |